buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Miscellaneous

Miscellaneous Machine Tools for Sale

62 new & used miscellaneous machine tools items for sale
1 | 2 | 3 | 4
Refine: Viewing 1 - 20 of 62 matches
Sort by:
Items Per Page:  20  |  50 |  100
Northwood 5 Axis, 108"x192"x50" Z CNC Router, 2011 Very Low
$RFQ
Northwood 5 Axis, 108"x192"x50" Z CNC Router, 2011 Very Low
Very Low Hours 3900 Model 255-FAMT Axes Travel Y Axis (Left to right) bridge 192” X Axis (Front to back) Worktable 108” Z Axis (up and down) 50” C Axis +517°/-115° A Axis +/- 115° A
Webster and Bennett No.33 Tension Spring
$RFQ
Webster and Bennett No.33 Tension Spring
This is a Webster and Bennett No.33 Tension Spring, that can fit all DH and EH models.
Webster and Bennett No.33 Tension Spring
$RFQ
Webster and Bennett No.33 Tension Spring
This is a Webster and Bennett No.33 Tension Spring, that can fit all DH and EH models.
Kent 38mm Wheel Flange for 63, 84, 510
$RFQ
Kent 38mm Wheel Flange for 63, 84, 510
Fits Kent 63AHD, 63WM1, 84AHD, 84WM1, 510AHD, 510WM1 This wheel flange supports grinding wheels that have a 5" through hole for the center hub to be mounted, and we support 1-1/2" thick wheels. Thinner wheel
WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
$RFQ
WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
Two (2) piece Set of (NEW) Saddle Nuts, Adjusting Nuts for the leadscrew of Vertical Turret Lathes. WEBSTER & BENNETT Part No.'s 730 & 731 Shipping Dimensions: 6" x 6" x6" 8 LBS T.
WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
$RFQ
WEBSTER & BENNETT Saddle Nuts, Adjusting Nuts for the leadscrew of VTL
Two (2) piece Set of (NEW) Saddle Nuts, Adjusting Nuts for the leadscrew of Vertical Turret Lathes. WEBSTER & BENNETT Part No.'s 730 & 731 Shipping Dimensions: 6" x 6" x6" 8 LBS T.
HAAS T5C-3 TRUNNION 5-AXIS ROTARY TABLE
$8,950
HAAS T5C-3 TRUNNION 5-AXIS ROTARY TABLE
3 TILTING HEADS
Weldon Geometricl Hook Checker
$1,500
Weldon Geometricl Hook Checker
Weldon Geometrical Hook Checker. **A MUST for Tool Grinders** Will Check Primary, Secondary and Rake Angles from 3/8" to 3" Diameter End Mills
WEBSTER BENNETT CHUCK SCREW
$RFQ
WEBSTER BENNETT CHUCK SCREW
Webster and Bennett chuck screw
NEWALL DP-7 2-AXIS DIGITAL READOUT SYSTEM
$RFQ
NEWALL DP-7 2-AXIS DIGITAL READOUT SYSTEM
DIGITAL READOUT, NEWALL, ANY, MODEL 7B211000, 41" SCALE, 36.5" SCALE,
PENDANT CONTROL ARM / FROM MACHINING CENTER
$RFQ
PENDANT CONTROL ARM / FROM MACHINING CENTER
PENDANT CONTROL ARM, STEEL CONSTRUCTION. REMOVED FROM FANUC OM INTERFACE COUNSIL
FANUC 5S
$RFQ
FANUC 5S
FANUC 5S RED CAP AXIS DRIVE MOTOR
EMERSON Unidrive SP
$RFQ
EMERSON Unidrive SP
Unidrive SP are standard AC input, AC output drives. The variable speed drives are easy to install and commission and can be applied in a wide range of applications. Unidrive SP, 460VAC, Max Cont Output Current (hp):
Lucas Pendant Toggle, Tilt Turn Toggle Switch Handle, 542B Pendant Models
$RFQ
Lucas Pendant Toggle, Tilt Turn Toggle Switch Handle, 542B Pendant Models
Lucas Pendant Toggle, Tilt Turn Toggle Switch Handle, 542B Pendant Models
WEBSTER & BENNETT CONTROL PANEL COVER & ACCESORRIES
$RFQ
WEBSTER & BENNETT CONTROL PANEL COVER & ACCESORRIES
WEBSTER & BENNETT < CONTROL PANEL COVER> "GIVE YOUR WEBSTER A FACE LIFT"
G.E. FANUC OM CNC CONTROL, COMPLETE PANNEL RECLAIMED
$RFQ
G.E. FANUC OM CNC CONTROL, COMPLETE PANNEL RECLAIMED
G.E. FANUC OM CNC CONTROL, COMPLETE PANNEL RECLAIMED FROM RUNNING MACHINE AT TIME OF DECOMITIONING
DAYTON COOLANT PUMP WITH MOUNTING BRACKET
$RFQ
DAYTON COOLANT PUMP WITH MOUNTING BRACKET
Dayton coolant pump with bracket and hardware for mounting to machine. Was originally from an Excel CNC machine. Output.........1/4HP Cycle.........50/60Hz Volt............230/460V Max Amp........... 1.1/.6A Phase..
WEBSTER & BENNETT REPLACEMENT CLUTCH PLATE SET
$RFQ
WEBSTER & BENNETT REPLACEMENT CLUTCH PLATE SET
Includes 5 fiber gears 5 steel gears 6 springs 6 plungers We provide clutch plates, springs, and plungers for all models and sizes of Webster & Bennett machines. Please specify your Serial#, Model#, and chuck
Webster & Bennett first shaft, model WB8113, factory reclaimed
$RFQ
Webster & Bennett first shaft, model WB8113, factory reclaimed
Length - 14(7/16)inch, Diameter - 1(1/2)inch, Weight - 5(1/4)LBS
WB 180 Webster Bennett feed box gear, Factory Reclaimed
$RFQ
WB 180 Webster Bennett feed box gear, Factory Reclaimed
Part No 180 Diameter - 9(1/4)inch, weight - 15(1/2)LBS, 180 teeth
Related Subcategories:
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4