buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 801 - 900 of 21075 matches
Sort by:
Items Per Page:  20 |  50 |  100
Wotan 6.3" Rapid 3 CNC Floor Type Horizontal Boring Mill w/Infeeding C
$RFQ
Wotan 6.3" Rapid 3 CNC Floor Type Horizontal Boring Mill w/Infeeding C
Reference #43589 Wotan 6.3" Rapid 3 CNC Floor Type Horizontal Boring Mill w/Infeeding Column FEATURES: Infeeding Column Universal Angle Head T-Slotted Floor Plates 2 Sets of Angle Plates CAPACITIES: Spin
  • Spindle diameter: 6.3"
  • X axis travel: 629.92"
    LINDBERG 2350 F ATMOSPHERE BOX FURNACE, ELECTRIC, 24"W 36"L 18&qu
    $RFQ
    LINDBERG 2350 F ATMOSPHERE BOX FURNACE, ELECTRIC, 24"W 36"L 18&qu
    DIGITAL CONTROLS ELECTRIC ATMOSPHERE BOX FURNACE WITH VERTICAL LIFT AIR OPERATED FRONT DOOR. HEATING ELEMENTS ARE ON BOTH SIDE WALLS, REAR WALL AND DOOR,. EQUIPPED WITH (3) GAS FLOSCOPES (ENDOTHERMIC, NATURAL GAS &
    • Chamber width: 24"
    • Chamber length: 36"
      LINDBERG 1400 F ELECTRIC BOX DRAW FURNACE 24"W 36"L 18"H
      $RFQ
      LINDBERG 1400 F ELECTRIC BOX DRAW FURNACE 24"W 36"L 18"H
      DIGITAL TEMPERATURE CONTROL AIR OPERATED VERTICAL LIFT FRONT DOOR. HEATING ELEMENTS AND BELT DRIVEN CIRCULATING FAN (WITH WATER COOLED SHAFT) ARE MOUNTED IN A CHAMBER BEHIND THE WORK AREA..
      • Chamber width: 24"
      • Chamber length: 36"
        POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
        $RFQ
        POLLUTION CONTROL VPI 52 BURN OFF OVEN 42"W 48"L 44"H
        DIGITAL CONTROLS SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND PRESSURE RELIEF ROOF PANEL. INTERIOR DOORS, WALLS AND ROOF ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT (35
        KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
        $RFQ
        KOIKE-ARONSON PLASMA ARC CUTTING SYSTEM WITH TABLE 10'CAPACITY
        NEW 2004 CAPACITY 3100MM (122") ORDER # S0178105 HYPERTHERM HYSPEED HT2000 POWER SUPPLY
        GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
        $RFQ
        GASBARRE 2150 F ELECTRIC ATMOSPHERE BOX FURNACE 28"W 48"L 28"
        DIGITAL CONTROLS ELECTRICALLY HEATED ATMOSPHERE (HYDROGEN & NITROGEN) RETORT BOX FURNACE WITH SIDE SWING DOOR (WATER COOLED DOOR FLANGE). INTERIOR HAS AN ALLOY RETO
        • Chamber width: 28"
        • Chamber length: 48"
          ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
          $RFQ
          ABBOTT 2100 F ATMOSPHERE 12"WIDE BELT FURNACE
          DIGITAL CONTROLS 12"WIDE ATMOSPHERE BELT FURNACE WITH ALLOY RETORT CURRENTLY USING A 10"WIDE BELT. PARTS ARE LOADED ON THE VARIABLE SPEED MESH BELT AT 6'LONG ENTRANCE TABLE, PASS THROUGH 3' ENTRANCE P
          • Chamber width: 12"
          • Chamber length: 216"
            STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
            $RFQ
            STEELMAN GAS FIRED BURN OFF OVEN 6'W 3'L 3'H
            DIGITAL CONTROLS DOUBLE DOOR OPENING WITH POSITIVE LATCHING. PRIMARY HEAT CHAMBER AND AFTER BURNER CHAMBER ARE MOUNTED ON REAR WALL WITH HEAT (351,000 BTU/HR MAX. TOTAL) SUPPLIED BY TWO PACKAGE BURNERS. HEAT FLOW IS &q
            LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
            $RFQ
            LUCIFER 1450 F TWO CHAMBER ELECTRIC FURNACE
            DIGITAL CONTROLS (2) CHAMBER BOX FURNACE WITH SIDE SWING DOORS AND REAR MOUNTED AIR CIRCULATING FANS. THE TOP CHAMBER IS 18"LONG . BOTTOM CHAMBER IS 48"L
            • Chamber width: 18"
            • Chamber length: 48"
              Ingersoll Rand VR-843 Telescopic Forklift
              $28,000
              Ingersoll Rand VR-843 Telescopic Forklift
              Type: Telescopic Capacity: 8,000lbs Max. Lift: 43' Engine: Cummins Fuel: Diesel Tires: Pneumatic Hours: 6,668 Weight: 34,500lbs Dimensions: 102" x 300" x 96"
              Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
              $RFQ
              Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
              Reference #43312 Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling
              • Swing: 78.74"
                Makino A-92 CNC Horizontal Machining Center
                $RFQ
                Makino A-92 CNC Horizontal Machining Center
                Reference #43243 Makino A-92 CNC Horizontal Machining Center Features: Makino Pro 5 (Fanuc) Control Full B-Axis Contouring (2) 39” x 32” Pallet Size Specification: X-Axis ................................ 59
                • X axis: 59.8"
                • Y axis: 49.2"
                  (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
                  $RFQ
                  (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/
                  Reference #43181 (2) 90.875" x 25.75" T-Slotted Angle Plates / Machining Tables w/ Fixture Surface Plates FEATURES: Drilled and Tapped Surface Fixture Plates T-Slots Cast Iron Construction SPECIFIC
                  Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
                  $RFQ
                  Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder
                  Reference #43174 Blanchard 22D-42 42" Vertical Spindle Rotary Surface Grinder FEATURES: 42" Magnetic Chuck Neutrofier II Magnetic Chuck Control 48" Swing Inside Guards 50 HP Main Motor CAPACITIE
                  • Chuck: 42"
                    Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
                    $RFQ
                    Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table
                    Reference #27645 Giddings & Lewis 96" x 120" Hydrostatic Rotary Index Table FEATURES: 75,000 lb Load Capacity 4-Positive Shot Pin Locations SPECIFICATIONS: Spindle Size ..........................
                    • Diameter or width: 96"
                    • Length: 120"
                      Genie Z34/22 Manlift
                      $18,500
                      Genie Z34/22 Manlift
                      Capacity: 500lbs Max Lift: 34' Fuel: Electric Tires: Pneumatic Hours: 4,965 Year: 2013 Weight: 10,032lbs Dimensions: 59" x 209" x 80"
                      Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                      $RFQ
                      Giddings & Lewis 360P 72" x 96" CNC Rotary Table
                      Reference #23421 Giddings & Lewis 360P 72" x 96" CNC Rotary Table FEATURES: 360 Degree Scale With 1/2 Degree Increments Hydraulic Clamping SPECIFICATIONS: Table Size ............................
                      • Diameter or width: 72"
                      • Length: 96"
                        Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                        $RFQ
                        Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                        Reference #19686 Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC Infeeding Slide ROTARY TABLE: Table Size ............................. 72" x 72" B-Axis Rotation .................
                        • Diameter or width: 72"
                        • Length: 72"
                          AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                          $79,500
                          AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder
                          Reference #32038 AZ Spa CG500/3 39" x 200" CNC Crankshaft Grinder FEATURES: Siemens 840D CNC Controls Marposs P7 Gauging Marposs Shape Control Heidenhain Scales Wheel Balancing System Steady Rest
                          • Crankshaft swing: 39.37"
                            Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                            $RFQ
                            Mori Seiki Model MH-1003 CNC Horizontal Machining Center
                            SPECIFICATIONS: Pallet Size 39.4” x 39.4” X-axis 80.3” Y-axis 51” Z-axis 47.2” Table Indexing 1° Maximum Table Load 6,600 lbs. Distance from Spindle Center to Table Top 1.97”-53.17” Distance from Spindle Nos
                            Schroder MAK4 4000/5,0 5mm x 158" CNC Folder
                            $RFQ
                            Schroder MAK4 4000/5,0 5mm x 158" CNC Folder
                            Reference #44003 Schroder MAK4 4000/5,0 5mm x 158" CNC Folder FEATURES: POS3000 Professional PC Based Graphic Control with Touchscreen U-Shaped Back-Gauge Foot Switch CAPACITY: Bending Capacity ..........
                            • Bending length: 158.57"
                              2016 Bobcat E20 Compact Excavator w/ 20' Bucket RTR#4103506-01
                              $13,500
                              2016 Bobcat E20 Compact Excavator w/ 20' Bucket RTR#4103506-01
                              Equipment located in Thonotosassa, FL. 2016 Bobcat E20 Compact Excavator w/ 20' Bucket, T4 Diesel Engine, Hyd Transmission, Open Cab, Blade, Hour Meter Reads: 2,351 (Unverified), S/N: B3BL12791 All equipment is sol
                              FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                              $RFQ
                              FADAL VMC 15 VERTICAL MACHINING CENTER 1994
                              FADAL VMC 15 VERTICAL MACHINING CENTER 1994 Serial # 9404163 MODEL........................: 914-15 TRAVELS: X............................: 20" Y............................: 16" Z.....................
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                              $RFQ
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                              $RFQ
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999
                              Fadal VMC 3016L Model 904-1L, CNC Vertical Machining Center, 1999 S/N 9910278 Fadal CNC 88 HS CNC Controller, 21-Automatic Tool Changer, CAT40 Taper, Work Light Table Size: 38″x16″ Travels: X Axis 30″ Y Axis
                              2015 Bobcat T590 Skid Steer w/ Bucket RTR#5013399-01
                              $25,000
                              2015 Bobcat T590 Skid Steer w/ Bucket RTR#5013399-01
                              Equipment located in Essex, MD. 2015 Bobcat T590 Skid Steer w/ Bucket, T4 Final Diesel Engine, Hyd Transmission, Enclosed Cab, Power Steering, Brakes, A/C, Heater, AM/FM Radio, Hour Meter Reads: 3,175 (Unverified), S/N:
                              3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                              $RFQ
                              3/4" X 30" Eldorado Mega Model M-75-1041 Precision Deep Hole Gun
                              SPECIFICATIONS: Drilling Diameter Maximum .75” Drilling Diameter Minimum .055” Maximum Drilling Depth 30” Spindle Speeds 725-5860 RPM Drilling Feed Rate .1-99.9 IPM Rapid Feed Rate 200 IPM Work Table 22” x 26” H
                              Haas VF-6/40 CNC Vert Machining Cntr, 28" x64" tbl, XYZ=64/32/30&
                              $RFQ
                              Haas VF-6/40 CNC Vert Machining Cntr, 28" x64" tbl, XYZ=64/32/30&
                              HAAS VF-6/40 CNC VERTICAL MACHINING CENTER Model VF-6/40, S/N 1127336, New 2015 Stock # Q11999 EQUIPPED WITH: Haas CNC Control, Coolant System, Chip Conveyor. SPECIFICATIONS: # Axis.............................
                              • X axis: 64"
                              • Y axis: 32"
                                Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                                $RFQ
                                Johnford SV-40 CNC Vert Machining Cntr, 47" x20" tbl, XYZ=41/20/2
                                JOHNFORD SV-40 CNC VERTICAL MACHINING CENTER Model SV-40, S/N MLB130534, New 2013 Stock # Q11996 EQUIPPED WITH: Fanuc 0i CNC Control, 10000 RPM Cat 40 Spindle, 24 ATC, Spindle Chiller, Chip Pan. SPECIFICATIONS:
                                • X axis: 41"
                                • Y axis: 20"
                                  MECOF CS-88 Universal Boring & Milling Machine
                                  $RFQ
                                  MECOF CS-88 Universal Boring & Milling Machine
                                  Reference #31589 MECOF CS-88 Universal Boring & Milling Machine CAPACITY: Head Vertical Travel, Y-Axis ......... 70" Table Travel, X-Axis ................. 169" Ram Travel, Z-Axis ...................
                                  • Spindle diameter: 5"
                                  • X axis travel: 169"
                                    144 Ton Trumpf V1300 6-Axis CNC Press Brake
                                    $RFQ
                                    144 Ton Trumpf V1300 6-Axis CNC Press Brake
                                    Reference #43975 144 Ton Trumpf V1300 6-Axis CNC Press Brake CAPACITY: Tonnage Capacity ...................... 144 Tons Maximum Bending Length ................ 127.1" Distance Between Housings ............. 1
                                    • Tonnage: 144T
                                      Agie Agiecut Progress 2 CNC Wire EDM, Agievision CNC, XYZ=13.8/9.8/10.1&
                                      $RFQ
                                      Agie Agiecut Progress 2 CNC Wire EDM, Agievision CNC, XYZ=13.8/9.8/10.1&
                                      AGIECHARMILLES CNC WIRE TYPE ELECTRIC DISCHARGE MACHINE Model Agiecut Progress 2, S/N 266, New 2005 Stock # Q12006 EQUIPPED WITH: AgieVision CNC Control, Affinity Chiller, Transformer. SPECIFICATIONS: Max Workp
                                      • X axis travel: 13.77"
                                      • Y axis travel: 9.84"
                                        DMG Mori NLX 2500Y/700 CNC Lathe, 36" Swing, 28.6" Turn Length, 3
                                        $RFQ
                                        DMG Mori NLX 2500Y/700 CNC Lathe, 36" Swing, 28.6" Turn Length, 3
                                        DMG MORI NLX 2500Y/700 CNC LATHE Model NLX 2500Y/700, New 2014 Stock # Q12021, Q12022 EQUIPPED WITH: M730BM (MAPPS IV) CNC Control, Custom Chuck currently on the Machine No Chuck Included in Sale, Live Tooling w/ 9
                                        • Swing: 36.2"
                                          Kiwa KNH-400 Horizontal Machining Center
                                          $RFQ
                                          Kiwa KNH-400 Horizontal Machining Center
                                          SPECIFICATIONS: Pallet Width 15.75” Pallet Length 15.75” Pallet Capacity 880 lbs. Pallet Indexing (B-axis) 1 Degree X-axis Travel 23.62” Y-axis Travel 23.62” Z-axis Travel 19.8” X-axis Rapid Feedrate 1968 IPM Y-
                                          Johnford DMC-1500H CNC Gantry Mill, 63" x33.5" tbl, XYZ=59"/
                                          $RFQ
                                          Johnford DMC-1500H CNC Gantry Mill, 63" x33.5" tbl, XYZ=59"/
                                          JOHNFORD DMC-1500H GANTRY MILL Model DMC-1500H, New 2006 Stock # Q12020 EQUIPPED WITH: Fanuc Oi/MD CNC Control, Spindle Air Blast, Heat Exchanger, Full Enclosure, Rigid Tapping, Spindle Oil Cooler, Working Lamps (O
                                          • X axis: 59.1"
                                          • Y axis: 35.43"
                                            Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
                                            $110,000
                                            Est. 2019 Hitachi ZAXIS 250LC-6 Excavator RTR#5013076-01
                                            Unit located in Harriman, TN. Est. 2019 Hitachi ZAXIS 250LC-6 Excavator w/ Bucket, Isuzu 4HK1 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, AM/FM Radio, Hyd Thumb, Hour Meter Reads: 2,327 (
                                            2020 Cat 239D3 Compact Track Loader w/ Bucket RTR#5013389-01
                                            $34,500
                                            2020 Cat 239D3 Compact Track Loader w/ Bucket RTR#5013389-01
                                            Unit located in Lenexa, KS. 2020 Cat 239D3 Compact Track Loader w/ Bucket, Cat C2.2 CRDI Diesel Engine, Hyd Transmission, Enclosed Cab, Power Steering, A/C, Heater, AM/FM Radio, Tape Deck, Rops, Hour Meter Reads: Unknow
                                            4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                                            $RFQ
                                            4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
                                            4' x 12" OOYA RADIAL ARM DRILL Model RE-1225H, S/N OA8-21000, New 1979 Stock # Q12015 EQUIPPED WITH: Hardened Arm Ways, Tapping Capabilities, Power Elevation, Power Clamping, Coolant System (Built-In).
                                            • Arm length: 4.083'
                                            • Column diameter: 12.625"
                                              8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                                              $RFQ
                                              8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
                                              8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia
                                              • Roll length: 99"
                                              • Thickness: 0.406"
                                                HAAS HL-2BB CNC LATHE
                                                $5,950
                                                HAAS HL-2BB CNC LATHE
                                                BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK
                                                • Swing: 20"
                                                • Centers: 20"
                                                  Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
                                                  $RFQ
                                                  Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
                                                  THERMO FISHER SCIENTIFIC BENCHTOP INCUBATOR Model Heratherm IMH180, New 2015 Stock # Q11725, Q11726 (2) Incubators Available FEATURES: Advanced Protocol Microbiological Incubator Capacity 6.3 cu ft (178L) Dual
                                                  15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/
                                                  $RFQ
                                                  15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/
                                                  15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/CNC Teach Lathe SPECIFICATIONS: Swing Over Bed 15.75” 400 MM Swing in Gap 23” 585 MM Gap Width from Faceplate 6.5” 165 MM Swing Over Cr
                                                  2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
                                                  $135,000
                                                  2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
                                                  Equipment located in Ashland, VA. 2023 CMC 92HD+ Arbor Pro Telescopic Boom Lift, Diesel Engine, 92' Working Height, 46' Lateral Reach, 507lb Platform Capacity, Multi Position Outriggers, Rubber Tracks, Hour Mete
                                                  CHEVALIER FSG-3A818 SURFACE GRINDER
                                                  $8,950
                                                  CHEVALIER FSG-3A818 SURFACE GRINDER
                                                  2 HP, 8" GRINDING WHEEL
                                                  • Table width: 8"
                                                  • Table length: 18"
                                                    16-36 Barber Colman Universal Gear Hobber
                                                    $RFQ
                                                    16-36 Barber Colman Universal Gear Hobber
                                                    SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
                                                    No. 16-36 Barber-Colman Universal Gear Hobber
                                                    $RFQ
                                                    No. 16-36 Barber-Colman Universal Gear Hobber
                                                    SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
                                                    2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
                                                    $68,000
                                                    2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
                                                    Unit located in Stoney Creek, VA. 2015 John Deere 824K Wheel Loader w/Bucket, PowerTech PSX 6135 Diesel Engine, Powershift Transmission, Enclosed Cab, Power Steering, Brakes, Air Ride Seat, A/C, Heater, Hour Meter Reads
                                                    2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
                                                    $60,000
                                                    2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
                                                    Unit located in St. Cloud, MN. 2022 Wacker Neuson ET65 Compact Excavator w/ Bucket & Blade, Perkins 404F-22T Diesel Engine, Hyd Transmisson, Enclosed Cab, Hyd Thumb, A/C, Heater, AM/FM Radio, Hour Meter Reads: 151 (
                                                    2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
                                                    $53,000
                                                    2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
                                                    Unit located in Thomaston, GA. 2012 Vermeer D9x13 Series II Directional Drill w/ DikgiTrak Locating System, Track Mounted, Kubota Diesel Engine, Rubber Tracks, Rods, Hour Meter Reads: 4,761 (Unverified), 2021 Straight-l
                                                    Haas VF-2SS Machining Center
                                                    $51,500
                                                    Haas VF-2SS Machining Center
                                                    Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
                                                    Fadal VMC15 Machining Center
                                                    $19,000
                                                    Fadal VMC15 Machining Center
                                                    Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                                    428020515002
                                                    $399
                                                    428020515002
                                                    428-02-051-5002 worm drive gear, new, custom made for Rockwell 18" Planer
                                                    2011 Moffett M55 Piggyback Forklift RTR#4123591-01
                                                    $19,500
                                                    2011 Moffett M55 Piggyback Forklift RTR#4123591-01
                                                    Equipment located in Thomaston, GA. 2011 Moffett M55 Piggyback Forklift, 10' Mast, Kubota Diesel Engine, Hydrostatic Transmission, Power Steering, Power Brakes, 2WD, Pneumatic Tires, 48" Fork Length, Front Sta
                                                    2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
                                                    $55,000
                                                    2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
                                                    Equipment located in Raleigh, NC. 2017 Intermac Master 38.8 CNC Stone Router, S/N: 1000016281, With Z-Laser LP-HFD2, S/N: 1700008926 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. C
                                                    2018 Bradbury Sheet Slitter
                                                    $8,000
                                                    2018 Bradbury Sheet Slitter
                                                    Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)
                                                    Legacy Mill 8'
                                                    $750
                                                    Legacy Mill 8'
                                                    Legacy Mill 8' Model: 1500 EX [LegacyWoodworking Machinery] S/N: N/A
                                                    Lathe 24" VS 3hp 24x48 Vcmrc
                                                    $3,900
                                                    Lathe 24" VS 3hp 24x48 Vcmrc
                                                    Lathe 24" VS 3hp 24x48 Vcmrc Model: VL300 [Vicmarc] SN: 149 Variable Speed 24-48 Lathe w/4 Chucks; 9 Face Plates; 5 Tool Rests; 2 Extra Tool Rest Banjos 3Hp; 1Ph; 220Volt
                                                    8' x 3/8" Americor Double Pinch Plate Bending Roll
                                                    $RFQ
                                                    8' x 3/8" Americor Double Pinch Plate Bending Roll
                                                    . We are pleased to offer for your consideration: (1) 3/8" x 8' Americor Double Pinch Plate Bending Roll Stock Number: 13985 List Price: On Request Manufacturer: Americor Model Number: 4RDP 250/8 S
                                                    • Roll length: 100"
                                                    • Thickness: 0.375"
                                                      Fadal VMC15XT Machining Center
                                                      $19,500
                                                      Fadal VMC15XT Machining Center
                                                      Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
                                                      2017 Komatsu PC360LC-11 Crawler Excavator RTR#4122244-01
                                                      $57,000
                                                      2017 Komatsu PC360LC-11 Crawler Excavator RTR#4122244-01
                                                      Unit located in Riverside, CA. 2017 Komatsu PC360LC-11 Crawler Mounted Excavator w/ Bucket, Komatsu Diesel Engine, Automatic Transmission, Enclosed Cab, Heater, Air Conditioner, Hour Meter Reads: 5,948.8 (Unverified), S
                                                      Haas SMINIMILL2 Machining Center
                                                      $34,000
                                                      Haas SMINIMILL2 Machining Center
                                                      Table: 12" x 36" Spindle: CAT 40 x-Axis Travel: 16" y-Axis Travel: 14" z-Axis Travel: 15" Tool Turret: 20 RPM: 10,000RPM Controller: Haas Year: 2018 Voltage / Phase: 220 / 3 Weight: 4,6
                                                      SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                                      $RFQ
                                                      SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
                                                      WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Spindle RPM – Variable: 100 to 6,000 RPM Spindle Bore: 1.0625″ (27mm) Bar Size – Maximum: 1.0625″ (27mm) Tool Blo
                                                      • Swing: 0"
                                                      • Centers: 0"
                                                        Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center
                                                        $RFQ
                                                        Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center
                                                        Reference #43984 Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center FEATURES: OSP-P300MA-H CNC Control A/C-Axis Rotary Trunnion Table Renishaw Tool & Part Probe 32-Position ATC 15,000 RPM Spindle Thr
                                                        • X axis: 30"
                                                        • Y axis: 18.11"
                                                          National 5/16" Cold Header
                                                          $12,500
                                                          National 5/16" Cold Header
                                                          National 5/16" High Speed Cold Header, DSSD Capacity: 5/16" x 1-1/2" ***Complete inspection report. Has not been used for production since inspection. Specifications: Maximum Cutoff Diameter: 5/16
                                                          • Maximum workpiece diameter: 0.312"
                                                          • Maximum workpiece length: 1.5"
                                                            HNK NT-14/16FD CNC Vertical Lathe
                                                            $RFQ
                                                            HNK NT-14/16FD CNC Vertical Lathe
                                                            Reference #43872 HNK NT-14/16FD CNC Vertical Lathe FEATURES: Fanuc 18T CNC Control (2) Vertical Rams (2) 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Specifications:
                                                            • Swing: 62.99"
                                                              HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                                              $RFQ
                                                              HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                                                              Reference #43871 HNK VTB-12/16 47"/63" CNC Vertical Boring Mill FEATURES: Fanuc 18T CNC Control Vertical Ram 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Spec
                                                              • Swing: 62.99"
                                                                MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                                                $RFQ
                                                                MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                                                                MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002 S/N ZL150BE0266 SPECIFICATIONS Bar Capacity 1.77" Swing 26.77" Turning Diameter 17.32" Spindle Speed 5,000 RPM Co
                                                                40 Ton Trumpf 7036 CNC Electric Servo Press Brake
                                                                $RFQ
                                                                40 Ton Trumpf 7036 CNC Electric Servo Press Brake
                                                                Reference #43409 40 Ton Trumpf 7036 CNC Electric Servo Press Brake FEATURES: Tasc 6000 CNC Control w/ Operator Swivel Unit (6) Axis Back Gauge Hydraulic Tool Clamps LED Work Area Lighting Front & Rear Comfor
                                                                • Tonnage: 40T
                                                                  BACE Model V63HD Vertical Baler
                                                                  $RFQ
                                                                  BACE Model V63HD Vertical Baler
                                                                  SPECIFICATIONS: Nominal Bale Size 60” x 30” x 48” Height Bale Weight Up to 1,100 lbs. Bale Volume 50 cu. ft. No. of Bale Tie Slots 5 Loading Height 54 – ½” Ejector System Semi-Automatic Hydraulic Motor 15 HP
                                                                  Doral 6048 6-Wheel Structural Plate Shot Blast System
                                                                  $RFQ
                                                                  Doral 6048 6-Wheel Structural Plate Shot Blast System
                                                                  Reference #43956 Doral 6048 6-Wheel Structural Plate Shot Blast System FEATURES: Less than 100 Hours Blasting Hours! MAXIMUM WORK: Maximum Plate Width ................... 62" Maximum I-Beam ...............
                                                                  ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                                                  $104,995
                                                                  ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                                                                  CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! Distributor Overstock Mega Sale Selling At Well Below Cost with Factory Warranty. Limited Supplies Available. ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-
                                                                  • Maximum thickness capacity: 16Ga
                                                                  • Bending length: 126"
                                                                    2008 AMADA Pulsar 2415NT
                                                                    $RFQ
                                                                    2008 AMADA Pulsar 2415NT
                                                                    2008 AMADA Pulsar 2415NT, 4.0 KW, Max sheet size: 16’ X 5, Fanuc NT-PC Control, Year New: 2008 Model: Pulsar 2415NT Laser Power: 4.0 KW Laser Type: High Bred Max Sheet Size: 16’ X 5’ Reposition: Yes Z Axis Travel
                                                                    • Wattage: 4000W
                                                                    • X axis travel: 5'
                                                                      2018 AMADA LCG3015AJ
                                                                      $RFQ
                                                                      2018 AMADA LCG3015AJ
                                                                      AMADA LCG3015AJ, 2.0KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control, Year New: 2018 Model: LCG3015AJ Laser Power: 2.0KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z Axis Travel: 7.8
                                                                      • Wattage: 2000W
                                                                      • X axis travel: 5'
                                                                        MITSUBISHI FX-1 WIRE EDM
                                                                        $4,950
                                                                        MITSUBISHI FX-1 WIRE EDM
                                                                        SUBMERGED
                                                                        • X axis travel: 14"
                                                                        • Y axis travel: 10"
                                                                          Est. 2022 Belfab BEL 150 Dust Collector RTR#4083814-02
                                                                          $6,000
                                                                          Est. 2022 Belfab BEL 150 Dust Collector RTR#4083814-02
                                                                          Equipment located in O’Fallon, MO. Est. 2022 Belfab BEL 150 Dust Collector S/N: 2022-05-38985-1 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only.
                                                                          2020 AMADA Ensis 3015NT
                                                                          $RFQ
                                                                          2020 AMADA Ensis 3015NT
                                                                          2020 Ensis 3015NT, 3.0 KW, 120" x 60" Max Sheet Size, Fanuc NT-PC Control Model: Ensis 3015NT Laser Power: 3kw Laser Type: Flying Optic Max Sheet Size: 120" x 60" Shuttle Table: Yes Z-Axis: 7.
                                                                          • Wattage: 3000W
                                                                          • X axis travel: 5'
                                                                            Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                                                            $RFQ
                                                                            Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                                                            Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine, Upgraded 2011 SPECIFICATIONS: Measuring Range Z 23.6” Measuring Range X 8.7” Diameter 17.3” EQUIPPED WITH: Zoller Pilot 3.0 Operating and Ima
                                                                            Zoller Saturn 2 V420E2 Tool Presetting Machine
                                                                            $RFQ
                                                                            Zoller Saturn 2 V420E2 Tool Presetting Machine
                                                                            SPECIFICATIONS: Measuring Range Z 600mm (23.6”) Measuring Range X 350mm (13.7”) Max Tool Weight 20kg EQUIPPED WITH: Windows NTPC (with Diskettes). Zoller Multivision II Software (Diskettes Included). Keyboard and
                                                                            2020 AMADA Ensis 3015NT
                                                                            $RFQ
                                                                            2020 AMADA Ensis 3015NT
                                                                            2020 Ensis 3015NT, 3.0 KW, 120" x 60" Max Sheet Size, Fanuc NT-PC Control Model: Amada Ensis 3015NT Laser Power: 3kw Laser Type: Flying Optic Max Sheet Size: 120" x 60" Shuttle Table: Yes Z-Ax
                                                                            • Wattage: 3000W
                                                                            • X axis travel: 5'
                                                                              1973 John Deere 570A Motor Grader RTR# 4101190-01
                                                                              $9,000
                                                                              1973 John Deere 570A Motor Grader RTR# 4101190-01
                                                                              Unit located in Grand Junction, CO. 1973 John Deere 570A Motor Grader, 6 Cylinder Diesel Engine, Power Shift Transmission, Enclosed Cab, Blade, 4WD, Hour Meter Reads: 2,063 (Unverified), S/N: 001992T All equipment is s
                                                                              FPT Stinger 5-Axis CNC Vert Machining Cntr, 51" x39.3" tbl, XYZ=6
                                                                              $RFQ
                                                                              FPT Stinger 5-Axis CNC Vert Machining Cntr, 51" x39.3" tbl, XYZ=6
                                                                              FPT 5-AXIS CNC VERTICAL MACHINING CENTER Model Stinger, New 2004 Stock # Q11946 EQUIPPED WITH: Heidenhain TNC 430 CNC Control, 60 Station Automatic Tool Changer, Through the Spindle Coolant, Coolant System, Chip Co
                                                                              • X axis: 68.5"
                                                                              • Y axis: 55"
                                                                                BLANCHARD GRINDER
                                                                                $7,950
                                                                                BLANCHARD GRINDER
                                                                                42" CHUCK
                                                                                • Chuck: 42"
                                                                                  MATTISON HORIZONTAL SURFACE GRINER
                                                                                  $7,950
                                                                                  MATTISON HORIZONTAL SURFACE GRINER
                                                                                  18X72
                                                                                  • Table width: 18"
                                                                                  • Table length: 72"
                                                                                    Doosan DHP-4000 CNC Horizontal Machining Center
                                                                                    $RFQ
                                                                                    Doosan DHP-4000 CNC Horizontal Machining Center
                                                                                    Reference #43865 Doosan DHP-4000 CNC Horizontal Machining Center FEATURES: Fanuc 18i-MB CNC Control 60-Station Automatic Tool Changer 2-Station Automatic Pallet Changer 14,000 RPM Spindle Coolant Thru Spind
                                                                                    • X axis: 23.62"
                                                                                    • Y axis: 22.05"
                                                                                      Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                                                                      $RFQ
                                                                                      Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                                                                      Reference #27429 Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe FEATURES: Component Style Displaceable Headstock Displaceable Tailstock 30 Ton Weight Capacity CAPACITY: Maximum Turning Dia.Over
                                                                                      • Swing: 157.48"
                                                                                      • Centers: 393.7"
                                                                                        Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                                                                        $RFQ
                                                                                        Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                                                                        Reference #43784 Sunfirm CST-42160-10A CNC Hollow Spindle Lathe FEATURES: Fanuc OiTC CNC Controls 8-Position Turret 24" 4-Jaw Front Chuck 30" 3-Jaw Rear Chuck 10" Spindle Bore Chip Convey
                                                                                        • Swing: 42"
                                                                                        • Spindle hole diameter: 10"
                                                                                          GOULD & EBERHARDT 96H Gear Hobber
                                                                                          $RFQ
                                                                                          GOULD & EBERHARDT 96H Gear Hobber
                                                                                          Reference #19028 GOULD & EBERHARDT 96H Gear Hobber FEATURES: 125" Maximum Diameter Capacity 78" Diameter Work Table Large Assortment of Change Gears (1) HOB ARBOR Chip Conveyor Miscellaneous Guar
                                                                                          • Maximum gear diameter: 98"
                                                                                            2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
                                                                                            $16,000
                                                                                            2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
                                                                                            Equipment located in Raleigh, NC. 2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift, Deutz 64HP Diesel Engine, 500lb Capacity, Hour Meter Reads: 93 (Unverified), SN: 97000452 All equipment is sold “As Is, Where Is”.
                                                                                            2012 Bobcat T750 Compact Track Loader RTR#4103851-01
                                                                                            $23,000
                                                                                            2012 Bobcat T750 Compact Track Loader RTR#4103851-01
                                                                                            Equipment located in Porter, IN. 2012 Bobcat T750 Compact Track Loader w/ Bucket, V3800 Kubota Diesel Engine, Hyd Transmission, Power Steering, Brakes, A/C, Heater, AM/FM Radio, Hour Meter Reads: 3,510 (Unverified), S/N
                                                                                            Ficep Excalibur 1201 DE CNC Single Spindle Traveling Column Drill
                                                                                            $RFQ
                                                                                            Ficep Excalibur 1201 DE CNC Single Spindle Traveling Column Drill
                                                                                            Reference #43947 Ficep Excalibur 1201 DE CNC Single Spindle Traveling Column Drill with Automatic Tool Changer FEATURES: Ficep Pegaso PC Based CNC Control Monospindle Horizontal Drill Head 6-Station Automatic T
                                                                                            TSUGAMI BS-19 SWISS CNC SCREW MACHINE
                                                                                            $39,500
                                                                                            TSUGAMI BS-19 SWISS CNC SCREW MACHINE
                                                                                            FANUC CONTROL, IEMCA ELITE 220 BAR FEEDER
                                                                                            Okuma MC-V4020 Vertical Machining Center
                                                                                            $RFQ
                                                                                            Okuma MC-V4020 Vertical Machining Center
                                                                                            Okuma MC-V4020 Vertical Machining Center Year: 2000 Specifications: Table Size: 48" x 20" X Travel: 40" Y Travel: 20" Z Travel: 17" Max Table Load: 1500 Lbs Spindle Nose to Table: 6
                                                                                            DOOSAN LYNX 220 LMS CNC LATHE 2009
                                                                                            $RFQ
                                                                                            DOOSAN LYNX 220 LMS CNC LATHE 2009
                                                                                            DOOSAN LYNX 220 LMS CNC LATHE 2009 • BRAND: DOOSAN • YEAR: 2009 • MODEL: LYNX 220 LMS • APPLICATION TYPE: TURNING • MACHINE TYPE: TURN-MILL CENTRE • • CONTROL UNIT BRAND: FANUC i Technical Information - DOOSAN L
                                                                                            Bracker RN-080, 0.15" Cap, 0.08" - 1" Strk, 1640 RPM, 0.12 H
                                                                                            $RFQ
                                                                                            Bracker RN-080, 0.15" Cap, 0.08" - 1" Strk, 1640 RPM, 0.12 H
                                                                                            Serial No. 65568 SPECIFICATIONS: Capacity - Maximum............0.15" Riveting Pressure - Maximum............530 Lbs Riveting Time............0.1 - 5.9 seconds Working Stroke............0.08" - 1.0"
                                                                                            Mazak V414 CNC VMC, 1993
                                                                                            $RFQ
                                                                                            Mazak V414 CNC VMC, 1993
                                                                                            Mazak V414 CNC VMC, 1993 X-Axis: 22.05″ Y-Axis: 16.14″ Z-Axis: 18.11″ Table Top to Spindle Nose: 5.91″- 24.02″ Rapid Traverse Rate X, Y Axis: 945 IPM Rapid Traverse Z-Axis: 590 IPM Tool Storage Capacity: 30 Spind
                                                                                            2022 Multicam APEX 1R CNC Router (5 X 10 Table) RTR#4121077-01
                                                                                            $42,000
                                                                                            2022 Multicam APEX 1R CNC Router (5 X 10 Table) RTR#4121077-01
                                                                                            Unit located in Salem, OR. 2022 Multicam APEX 1R CNC Router (5 X 10 Table) ATC, 220v, 3PH, 60HZ, S/N: 1-204-RA1-14646; w/ Republic HRC1102 Blower All equipment is sold “As Is, Where Is”. Reasonable offers will be cons
                                                                                            2016 Kubota KX040-4 Excavator RTR#4033327-01
                                                                                            $28,000
                                                                                            2016 Kubota KX040-4 Excavator RTR#4033327-01
                                                                                            Unit located in San Antonio, TX. 2016 Kubota KX040-4 Mounted Compact Excavator, Kubota DI803-CR-TE4 Diesel Engine, Hyd Transmission, Blade, Hour Meter Reads: 2,102 (Unverified, S/N: JKUK0404V01H26830 All equipment is s
                                                                                            2024 Kymron XH26D Mini Track Excavator RTR#4051743-01
                                                                                            $25,000
                                                                                            2024 Kymron XH26D Mini Track Excavator RTR#4051743-01
                                                                                            Unit located in Phoenix, AZ. 2024 Kymron XH26D Mini Track Excavator w/ Hyd Thumb, Bucket & Blade, Yanmar Diesel Engine, Hyd Transmission, Enclosed Cab, Side Swing Boom, Tinted Glass, AM/FM Radio, Hour Meter Reads: 5
                                                                                            HEM H100A HORIZONTAL AUTOMATIC BAND SAW
                                                                                            $7,950
                                                                                            HEM H100A HORIZONTAL AUTOMATIC BAND SAW
                                                                                            12" X 12" , 3 HP
                                                                                            130 Ton Accurpress 4X CNC Press Brake, ETS3000, Crowning
                                                                                            $RFQ
                                                                                            130 Ton Accurpress 4X CNC Press Brake, ETS3000, Crowning
                                                                                            . We are pleased to offer for your consideration: (1) 130 ton Accurpress Hydraulic CNC Press Brake Stock Number: 13971 List Price: On Request Manufacturer: Accurpress Model Number: 713010 Advantage Serial Nu
                                                                                            • Tonnage: 130T
                                                                                              Categories:
                                                                                              Condition:
                                                                                              Manufacturer:
                                                                                              Location:
                                                                                              Price:
                                                                                              •  to 
                                                                                              1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>