buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Tube & Pipe Machinery > Cut-Offs - Pipe Tube & Bar > New Jersey

Pipe Tube & Bar Cut Off Saws in New Jersey For Sale

16 new & used pipe tube & bar cut off saw items for sale in New Jersey
1
Refine: Viewing 1 - 16 of 16 matches
Sort by:
Items Per Page:  20  |  50 |  100
80mm Adige Re Cut Machine 2003
$RFQ
80mm Adige Re Cut Machine 2003
Manufacturer: Adige Italy Year: 2003 Round Min. Diameter: 12mm Round Max. Diameter: 80mm Square Range: 10mm x 10mm / 70mm x 70mm Rectangular: 15mm x 10mm / 80mm x 70mm Min Solid Bars: 12mm Max Solid Bars: 30mm
2" THERMATOOL / ALPHA DOUBLE CUT CUT-OFF
$RFQ
2" THERMATOOL / ALPHA DOUBLE CUT CUT-OFF
Year 2000 Flying cut-off Double cut design Speed: 400 fpm Capacity: 25" x 30" Cutoff capacity: 2" Dual Column 30' Entry Feed Conveyor Digital Controller Digital readout Air clutch Hydraulic u
3" Pines Dyna Cut Machine
$RFQ
3" Pines Dyna Cut Machine
3" Round Capacity Hydraulic Drive 24' Mechanical Tube Feed Loader Push Button Controls 12' Tube Out-Feed Conveyor Dump Table
3" Haven Model 873 Re-Cut Machine with Brush De-Burr Unit
$RFQ
3" Haven Model 873 Re-Cut Machine with Brush De-Burr Unit
Year 2000 3" - 1/2" Round Capacity 2.125" Square Capacity .120" Max Wall Thickness 2" - 120" Cut Lenghts Entry Tube Length: 10' - 25' Dual Blade Shearing Servo Roll Feed Targe
2" KUSAKABE TUBE CUTOFF
$RFQ
2" KUSAKABE TUBE CUTOFF
2" CAPACITY EQUIPPED WITH:- SWING ARM TYPE -SINGLE CUT TUBE GUIDE END STOP SNUBBER GUARDS DISC BRAKE LUBRICATOR MOTOR DC DRIVE WITH COOLING FAN O.D. 8'L X 76"W X 78"H
1-3/4" BERTOLETTE MODEL #315 TUBE CUTOFF MACHINE
$RFQ
1-3/4" BERTOLETTE MODEL #315 TUBE CUTOFF MACHINE
TUBE CAPACITY: 1/8" - 1-3/4" O.D. x .065" WALL MAXIMUM CAPACITY STAINLESS STEEL & INCALLOY TO 1/2" O.D. MAX FEED LENGTH IN ONE STROKE 36", UP TO 4 STROKES ROTARY CUT AND PULL ROTARY CUT
1-1/2" X .094" HAVEN RE-CUT TUBE CUT OFF
$RFQ
1-1/2" X .094" HAVEN RE-CUT TUBE CUT OFF
Manufacturer: Haven Model: 871 Serial: 3140 Year: 1992 Max Tube Diameter: 1-1/2" Wall Thickness: .094" Hand of operation : left to right COMPLETE WITH: 20' Bundle loader / unscrambler Feed roll
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
$RFQ
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
BUILT 1973 PROCESSES TWO TUBES WITH SEPARATE CONTROLS FOR EACH TUBE SEVEN (7) ROLL HORIZONTAL & SEVEN (7) ROLL VERTICAL PLANE STRAIGHTENER AIR FEED CUTOFFS DRIVEN BY 1/2 HP DC MOTORS - 1725 RPM WITH CONTROLS CAP
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
$RFQ
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
Basket Payoff Straightener YODER Shear Hydraulic Clutch Payoff Table
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
$RFQ
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
DIA. TUBE CAPACITY................ 3/8" TO 1-1/8" 24 ROLL 2 PLANE STRAIGHTENER FLYING HYD. KNIFE SPEED CUTTING IN STRAIGHT LENGTHS. 250-700 FPM LENGTHS........................... 7' MIN TO 25' LONG LENGTHS
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
$RFQ
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
SPECIFICATIONS: YEAR 1985 DESIGNED USE: GENERALY USED TO STRAIGHTEN AND CUT COPPER TUBING SPECIFICATIONS: TUBE CAPACITY .................................. MIN. 1/4" TO MAX. 5/8" STRAIGHTENING R
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
$RFQ
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
CONSISTING OF: - (1) SCHUMAG FINISHING MACHINE, 1/4" TO 1-1/8" OUTSIDE DIAMETER TUBE CAPACITY - (1) 24-STATION COIL STRAIGHTENER, (12) VERTICAL ROLLS, (12) HORIZONTAL ROLLS, - (1) MARKING SYSTEM, - (1)
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
$RFQ
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
CAPACITY: MATERIAL - HARD DRAWN COPPER TUBING TUBE DIAMETER RANGE - 1/4" TO 1-1/8" MAXIMUM TUBE WALL THICKNESS - .015" MIN. TO .065" MAX. LINE SPEED - 0 TO 600 FPM ON 1/2" OR 5/8" DIAMET
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
$RFQ
BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
CAPACITY ............................... 3" CUT RUNOUT ............................. 48" STOCK TABLE ............................ 10' ROLLER FEED SPINDLE SPEEDS ......................... (52) 85 TO 1100 RPM
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF MACHINE
N E W 1 9 8 5 THIS MACHINE CUTS TWO TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING MACHINE RATED CAPACITY .................. 1/8" TO 3/8" DIAMETER RECOMMENDED FOR ................. .049"
HAVEN #802 DOUBLE TUBE CUT-OFF
$RFQ
HAVEN #802 DOUBLE TUBE CUT-OFF
N E W 1 9 8 5 THIS MACHINE CUTS "TWO" TUBES AT ONCE, DIMPLE FREE BY THE DUAL BLADE CUTTING METHOD RATED CAPACITY ..................... 1/8" TO 3/8" DIAMETER WALL THISKNESS ..................
Categories:
  • X machine tools (16)
  • X Tube & Pipe Machinery (16)
  • X Cut-Offs - Pipe Tube & Bar (16)
Condition:
Manufacturer:
Location:
  • X New Jersey (16)
Price:
  •  to 
1