buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Drills & Tapping Machinery > Used > Illinois

Used Drills & Tapping Machinery in Illinois

51 used drills & tapping machinery items for sale in Illinois
1 | 2 | 3
Refine: Viewing 1 - 20 of 51 matches
Sort by:
Items Per Page:  20  |  50 |  100
4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
SPECIFICATIONS: Drill Capacity 1” Diameter Drill Head Stroke 18” Spindle Horsepower (4) at 10 HP Each Number of Drill Bases 2 Number of Spindles 4 Feed Rate .1 IPM to 30.0 IPM Rapid Retraction of Drill Head
MRCM MR-U2, 0.7"Ø Cap, 3.9"Ø Wheel, 1/4 HP, 5200 RPM, R
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters. The universal index head is provided at 24 positi
HTT MD-1-400, 1-1/4"Ø Cap, 5"Ø Wheel, 3/4 HP, Table Sli
SPECIFICATIONS: Grinding range............0.1181 - 1.259" Slide Table Movement: - Left and right stroke............7.087" - Front and rear travel............3.149" Grinding Wheel: - Vertical movemen
1" x 60" Technidrill 100-60-.5-3-1, Counter Rotation, 1996
New - 1996 Serial No. 7115-6/96 SPECIFICATIONS: Hole Capacity: - Diameter............0.125" - 1" - Allowable Drilling depth with whip guides............60" Drilling Spindle: - Quantity............
3/4" x 15", Eldorado M75-15C, 2-Spdl, 2HP, 1445 - 11,740 RPM, AB
Serial No. EL-2068/RH, EL-2067/LH New - 2005 SPECIFICATIONS: Number of Gun Drilling Spindles…………2 (Independent) Capacity with 15" Stroke…………3/4" Diameter Gun Drilling Diameter Capacity - Mild Steel…………0.
1” x 48” Technidrill/Triad Model G148 1.00.15-1CR Counter Rotating Deep
1” x 48” Technidrill/Triad Model G148 1.00.15-1CR Counter Rotating Deep Hole Drill SPECIFICATIONS: Drilling Depth, Max. 48” + 6” Clamp Drilling Diameter, Max. 1” Feed Rates .5-40 IPM Rapid Traverse Rate 100 IPM R
3/4" x 30", Eldorado M75-1041, 2 HP, 26" x 22" Table, 1
New - 1998 Serial No. 1770 SPECIFICATIONS: Gundrilling Diameter Capacity - Mild Steel............0.055" - 0.75" Ball Screw Stroke Length............30" Fixture Table Area............26" x 22.25
1 ¼” x 48” Phillips Gun Drilling Machine with Counter Rotation
SPECIFICATIONS: Drilling Capacity 1 ¼” Maximum Drilling Depth 48” Max Travel 54” Drilling Speeds Range 758-7700 RPM Feed Rate 0.5” to 19.9 IPM Rapid Advance & Retract Rate 100 IPM Max. Coolant Pressure 1
3/4" x 15", Eldorado M75-1032, 3HP, 1,445-11,740 RPM, 26"L x
New - 2003 Serial No. 2009 SPECIFICATIONS: Capacity............3/4" Diameter x 15" Stroke Gundrilling Diameter Capacity............0.053" - 0.750" Diameter Ball Screw Stroke Length - Maximum...
¾” x 30” ElDorado/Mega Model M-75-1041 Precision Deep Hole Gun Drill
Maximum Drilling Diameter 0.75 inches Minimum Drilling Diameter
¾” x 30” ElDorado/Mega Model M-75-1041 Precision Deep Hole Gun Drill
Maximum Drilling Diameter 0.75 inches Minimum Drilling Diameter
4” X 48” Phillips / Technidrill BTA Ejector Type Deep Hole Drilling Machine
Drilling Diameter, Maximum 4” Drilling Depth, Maximum
$48,000
2012 Haas DT-1
Specifications: Table Size ................................................................................ 26” x 15” Table Load (max) ..................................................................... 250 LBS. X-A
  • Maximum diameter hole drilled: 20"
  • Maximum diameter hole tapped: 16"
    8' x 15"  AMERICAN MODEL 65 RADIAL ARM DRILL
    8' x 15"&nbsp; AMERICAN MODEL 65 RADIAL ARM DRILL<br /> <br /> New 1974<br /> <br /> Motor Driven with 7-1/2/3-3/4 HP, 3-Phase, 60-Cycle, AC Motor and Controls. 5 HP Arm Motor<br /> <
    24" ALLEN SINGLE SPINDLE BOX COLUMN DRILL ( HAND FEED )
    24" ALLEN SINGLE SPINDLE BOX COLUMN DRILL ( HAND FEED ) S/N MA33711 NEW APPROX. 1971 TAPER ----------
    • Swing: 24"
    • Motor: 3HP
      4' X 11" FORADIA RADIAL DRILL,  MODEL GR-50/1200
      4' X 11" FORADIA RADIAL DRILL MODEL GR-50/1200 S/N 6558 NEW APPROX. 1975 BUILT IN SPAIN
      • Arm length: 4'
      • Column diameter: 11"
        SNOW NTLS40ED SINGLE SPINDLE ANGULAR TAPPING MACHINE
        SNOW NTLS40ED SINGLE SPINDLE ANGULAR TAPPING MACHINE S/N 5105 NEW 2002 DESIGNED TOOLING FOR 3/8" TAP DESIGNED TOOLING FOR 1
        4' X 11" CINCINNATI BICKFORD SUPER SERVICE RADIAL DRILL
        4' X 11" CINCINNATI BICKFORD SUPER SERVICE RADIAL DRILL S/N 2E1074 NEW 1957 FACE OF COLUMN TO CENTER OF SPINDLE, MAX. - 4' COLUMN D
        • Arm length: 4'
        • Column diameter: 11"
          3' x 9" OOYA MODEL YMR-915 RADIAL DRILL
          3' x 9" OOYA MODEL YMR-915 RADIAL DRILL S/N 57612029 NEW 1976 MAXIMUM DISTANCE SPINDLE TO COLUMN -------- 36" COLUMN DIAMETER ---------------------------------- 9" DRI
          • Arm length: 3'
          • Column diameter: 9"
            Haas TR-160 (Brushless) 5th Axis Trunnion Table
            Specifications: Platter Diameter .............................................................................. 6.30" (160mm) Part Swing Max. .....................................................................
            Related Subcategories:
            Condition:
            • X Used (51)
            Location:
            • X Illinois (51)
            Price:
            •  to 
            1 | 2 | 3