buy & sell, new & used machinery, machine tools & equipment

Lifting Equipment > Used

Used Lifting Equipment For Sale

1397 used lifting equipment items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 1397 matches
Sort by:
Items Per Page:  20  |  50 |  100
8" Dia. 3 Jaws Kitagawa B208 LATHE CHUCK, Hydraualic
$850
8" Dia. 3 Jaws Kitagawa B208 LATHE CHUCK, Hydraualic
KITAGAWA B208 3-JAW HYDRAULIC CHUCK FOR MORE INFORMATION: Call Mike at 973-497-7540
30" Width 36" Length Marathon 3630 BALER
$2,950
30" Width 36" Length Marathon 3630 BALER
  MARATHON VERTICAL BALER MODEL 3630      S/N 42877   CYCLE TIME ............................ 28 SECONDS MAXIMUM OPERATING FORCE ............... 19.65 TONS    &nbs
Niagara 180 CRIMP BEADING MACHINE
$6,950
Niagara 180 CRIMP BEADING MACHINE
  NIAGARA MOTORIZED COMBINATION ROTARY MACHINE MODEL 180         S/N 62414        NEW 1972   INTERCHANGEABLE ROLLS MAKE THIS MACHI
2016 Clark OSX15 Electric Narrow Isle Forklift RTR#5023227-01
$17,000
2016 Clark OSX15 Electric Narrow Isle Forklift RTR#5023227-01
Unit located in Mulberry, FL. 2016 Clark OSX15 3,000 lb. Capacity Electric Narrow Isle Forklift, Power Steering, Power Brakes, Extreme Power 36V 3 Phase Battery Charger, Hour Meter Reads: 1,230 (Unverified), S/N: OSX15-
Clark TM20 3,000 lbs. Electric Forklift
$RFQ
Clark TM20 3,000 lbs. Electric Forklift
Clark TM20 3,000 lbs. Electric Forklift, comes with charger
Hyster S60FT Forklift
$10,500
Hyster S60FT Forklift
Capacity: 6,000 lbs Max Lift: 187" Engine: PSI 2.4L Fuel: Propane Tires: Solid Side Shift: Yes Mast: 3 Hours: 10,303 Year: 2006 Weight: 10,310lbs Dimensions: 44" x 141" x 87"
  • Lifting capacity: 3T
  • Lift height: 15.5'
    CATERPILLAR NDC 100 ELECTRIC FORKLIFT (14394)
    $RFQ
    CATERPILLAR NDC 100 ELECTRIC FORKLIFT (14394)
    MANUFACTURER: CATERPILLARTYPE: TOWMOTORPOWER: ELECTRICMODEL: NDC 10024 VOLTBATTERY RATING: 750 AMP, 6 HOUR RATEDRATED DRAWBAR: 200 LB (91 KG) MAX., 700 LB (318 KG) INTERMITTENTSERIAL NO: 2HL04229TRUCK WEIGHT: 2345 LB (10
    ShuttleWagon SWX-435C Railcar Mover
    $RFQ
    ShuttleWagon SWX-435C Railcar Mover
    Reference #43986 ShuttleWagon SWX-435C Railcar Mover FEATURES: Cummins 6.7 US EP Teir 3 Diesel Engine Engine Block Heater Cambered Guide Wheel System SPECIFICATION: Torque @ 1,500 RPM ....................
    Ingersoll Rand VR-843 Telescopic Forklift
    $28,000
    Ingersoll Rand VR-843 Telescopic Forklift
    Type: Telescopic Capacity: 8,000lbs Max. Lift: 43' Engine: Cummins Fuel: Diesel Tires: Pneumatic Hours: 6,668 Weight: 34,500lbs Dimensions: 102" x 300" x 96"
    Genie Z34/22 Manlift
    $18,500
    Genie Z34/22 Manlift
    Capacity: 500lbs Max Lift: 34' Fuel: Electric Tires: Pneumatic Hours: 4,965 Year: 2013 Weight: 10,032lbs Dimensions: 59" x 209" x 80"
    2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
    $127,000
    2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
    Equipment located in Ashland, VA. 2023 CMC 92HD+ Arbor Pro Telescopic Boom Lift, Diesel Engine, 92' Working Height, 46' Lateral Reach, 507lb Platform Capacity, Multi Position Outriggers, Rubber Tracks, Hour Mete
    2011 Moffett M55 Piggyback Forklift RTR#4123591-01
    $17,500
    2011 Moffett M55 Piggyback Forklift RTR#4123591-01
    Equipment located in Thomaston, GA. 2011 Moffett M55 Piggyback Forklift, 10' Mast, Kubota Diesel Engine, Hydrostatic Transmission, Power Steering, Power Brakes, 2WD, Pneumatic Tires, 48" Fork Length, Front Sta
    2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
    $14,000
    2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
    Equipment located in Raleigh, NC. 2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift, Deutz 64HP Diesel Engine, 500lb Capacity, Hour Meter Reads: 93 (Unverified), SN: 97000452 All equipment is sold “As Is, Where Is”.
    #166 • INGERSOLL RAND 4000 LB AIR WINCH
    $RFQ
    #166 • INGERSOLL RAND 4000 LB AIR WINCH
    SN AA5399-255, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #164 • RAM WINCH KGUL-24MX1
    $RFQ
    #164 • RAM WINCH KGUL-24MX1
    MAX 18000 LBS, SN RAM080508, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #165 • 2006 INGERSOLL RAND MAN RIDER WINCH
    $RFQ
    #165 • 2006 INGERSOLL RAND MAN RIDER WINCH
    MODEL NO. FA2i- MR24MK1GV, SN A004483, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #45 • TEREX MATERIAL HANDLER
    $RFQ
    #45 • TEREX MATERIAL HANDLER
    6432 HOURS SHOWING, RUNS AND DRIVES, FUNCTIONAL MAGNET, SEE VIDEO, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #40 • 2010 MARINE EQUIPMENTS LARGE CAPACITY MARINE WINCH
    $RFQ
    #40 • 2010 MARINE EQUIPMENTS LARGE CAPACITY MARINE WINCH
    MODEL ME-AHTW-DDWF-1201, WINDING CAPACITY 120/60/15 TON, 241 HP, SN ME101C-10, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #47 • 2 TON SHIP CRANE
    $RFQ
    #47 • 2 TON SHIP CRANE
    APPROX 258” BOOM LENGTH, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    #37 • WELIN LAMBIE FRC LAUNCHING DAVIT CRANE
    $RFQ
    #37 • WELIN LAMBIE FRC LAUNCHING DAVIT CRANE
    TYPE SARB10A, LOCATED AT 8200 OLD YACHT CLUB RD. PORT ARTHUR, TX 77642, FOR MORE INFORMATION PLEASE CONTACT KURT SONNIER AT (225) 363-8778
    Categories:
    Condition:
    • X Used (1397)
    Manufacturer:
    Location:
    Price:
    •  to 
    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>