Machine Sales – Buy or Sell New and Used Machinery and Machine Tools at Machine Sales

Aerator For Single Cell Septic System

$45,000

This Machine Was Used In A Small Oxidation Pond Which Serviced About 20 Homes and 15 RV Spots In A small Trailor Park

DeRidder, LA
View Listing

Lincoln Diesel Welder

$4,800

This Welder Has A 3 Cylinder Diesel Engine, Comes With Leads

DeRidder, LA
View Listing

Chip Spreader

$9,000

This Machine Is Ready To Work.

DeRidder, LA
View Listing

KG Blade Fits D6

$3,500

This Blade Fits A D6

DeRidder, LA
View Listing

KG Blade Fits D8

$4,000

This Blade Fits A D8

DeRidder, LA
View Listing

Cat Pneumatic Roller

$16,500

This Machine Is Ready To Work. Has Been Used On Multiple Jobs.

DeRidder, LA
View Listing

2022 CMC 83HD+ Arbor Pro Telescopic Boom Lift RTR#4083829-01

$118,000

Equipment located in Ypsilanti, MI. 2022 CMC 83HD+ Arbor Pro Telescopic Boom Lift, Diesel Engine, 83' Max Working Height, 46' Max Reach, 507lb Platform Capacity, Rubber Tracks, Multi Position Outriggers, Hour Me

Salem, OR
View Listing

John Deere 5055E

$38,000

This Tractor Is 4 Wheel Drive, Has Front End Loader With Less Than 100 Hrs On It.

DeRidder, LA
View Listing

40Ft. Float

$4,800

This trailer was recently re decked. Will need a hydraulic brake booster, someone stole it while it was parked on a jobsite.

DeRidder, LA
View Listing

HTT MD-1-400, 1-1/4"Ø Cap, 5"Ø Wheel, 3/4 HP, Table Sli

$RFQ

SPECIFICATIONS: Grinding range............0.1181 - 1.259" Slide Table Movement: - Left and right stroke............7.087" - Front and rear travel............3.149" Grinding Wheel: - Vertical movemen

Lincolnshire, IL
View Listing

John Deere 570 A

$13,500

This machine is ready to go to work. We just got done with a road job, don't have much use for it now. for more info or questions. Feel free to give us a call or send us an email.

DeRidder, LA
View Listing

2016 Tigercat 620E Log Skidder (Non-Running) RTR#4053448-01

$42,000

Equipment located in Maiden, NC. 2016 Tigercat 620E Log Skidder w/ Grapple (Non-Running), QSB6.7 Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, 4WD, Blade, Hour Meter Reads: 12,089 (Unverified), S/N: 620677

Salem, OR
View Listing

Gator Folding Machine (CNC) 10' x 12ga

$65,000

Experience unmatched precision and efficiency with the state-of-the-art Gator CNC Folding Machine. Designed to meet the demands of modern fabrication, this machine delivers superior performance in folding metal sheets wi

Maximum thickness capacity: 12Ga
Bending length: 120"

Cedar Park, TX
View Listing

2023 Accutek AVF6-8 Filling System RTR#4081594-01

$18,000

Equipment located in Phoenix, AZ. 2023 Accutek AVF6-8 Piston Filling Machine, 220V 15A 3.3KW w/ AVF Diving Head Upgrade; (6) Piston 8oz SS Piston For 8oz Piston Fillers (1) 2023 48" Diameter Unscrambling Turntable

Salem, OR
View Listing

Sertom EMO 31-60 2.75" x 10'' 3-Roll Hydraulic Variable Axis

$RFQ

Reference #32933 Sertom EMO 31-60 2.75" x 10'' 3-Roll Hydraulic Variable Axis Bending Roll FEATURES: Siemens Simatic Multi Panel PLC Control Console 3-Roll Variable Axis Design Overhead Plate Support

Thickness: 2.75"

Melville, NY
View Listing

Drum Sander 16-32 Plus w/Wheel

$999

Drum Sander 16-32 Plus w/Wheel Model: 629004K 16-32Plus [Jet] S/N: 10116330 16/32 Drum Sander w/Wheels & 26 Extra Rolls of Sand Paper 1-1/2Hp; 1Ph; 115Volt

Mesa, AZ
View Listing

OKUMA GENOS M560-V CNC VERTICAL MACHINING CENTER NEW: 2018| IH 86147

$RFQ

SPECS: X-AXIS: 41.34" Y-AXIS: 22.05" Z-AXIS: 18.11" POWER: 30 HP RPM: 15,000 RPM # ATC: 32 TAPER: #40 TABLE-W:

X axis: 41.34"
Y axis: 22.05"

Simi Valley, CA
View Listing

2014 Bobcat S530 Skid Steer w/ Bucket RTR#4071809-01

$15,000

Unit located in Phoenix, AZ. 2014 Bobcat S530 Skid Steer w/ Bucket, Bobcat Tier 4 Final Diesel Engine, Hyd Transmission, Open Cab, Power Brakes, Hour Meter Reads: 2,524 (Unverified), S/N: ALR811858 All equipment is sol

Salem, OR
View Listing

BIRMINGHAM VH-1010-6 10ft x 10ga. Hydraulic Box and Pan Brake

$22,750

CALL 386-304-3720 FOR AVAILABILITY ***Special Promotion - Only 1 In Stock at This Price*** Please verify In Stock BEFORE Ordering Prices Valid on In Stock Machines Only Call for Freight FEATURES: Bending angle

Maximum bending capacity: 0.134"
Bending length: 120"

Port Orange, FL
View Listing

DMG MORI NLX 2500SY/700 CNC LATHE NEW: 2015| AG 86140

$RFQ

SPECS: Swing Over Bed 36.4" Turning Diameter 14.4" Turning Length 27.7" Distance Between Spi

Swing: 36.4"
Centers: 27.7"

Simi Valley, CA
View Listing

Circ Saw 7-1/4" Worm-drv Skil

$199

Circ Saw 7-1/4" Worm-drv Skil Model: 77 [Skil] S/N: HC108819 7-1/4" Worm Gear Circular Saw 13Amp; 1Ph; 120Volt

Mesa, AZ
View Listing

2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01

$9,000

Equipment located in Raleigh, NC. 2021 Maripak - LMC Series Semi-Automatic - L-Bar Sealer Model: 80/65 v2, 220v, S/N: 17600, With 2021 Maripak T60-1400 H400 Diamond Heat Tunnel, 220v, S/N: 17299 All equipment is sold “

Salem, OR
View Listing

2018 Vermeer AX19 Trailer Mounted Brush Chipper RTR#4083724-01

$78,000

Equipment located in Thomaston, GA. 2018 Vermeer AX19 Trailer Mounted Brush Chipper, T/A, John Deere 4045HFC09 Diesel Engine, 173 Hp, Pintle Hitch, Electrical Brakes, Hour Meter Reads:1,287 (Unverified, S/N: 1VRL19252J1

Salem, OR
View Listing

PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear

$37,995

CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Mechanical Power Squaring Shear with Manual Front-Operated Backgauge, Pneumatic Sheet Support Device with Front Return and Material Cart Go-To

Port Orange, FL
View Listing

Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120

$RFQ

CNC Control yes Type of CNC Control Siem

Fridley, MN
View Listing

Matsuura MAM72-70V PC-6 CNC 5-axis Machining Center, New 2021, Tbl. 19.68 x 19.68, 20k Rpm

$RFQ

CNC Control yes Type of CNC Control MATS

Fridley, MN
View Listing

AMADA EMLK 3610 NT CNC TURRET PUNCH NEW: 2014 | RM 86139

$RFQ

SPECS: PUNCH CAPACITY: 33 TONS MAX. LASER OUTPUT: 4,000 WATTS MAX. SHEET SIZE: 60" X 200" (WITH ONE AUTO REPO) MAX SHEET THICKNESS: 1/4" MS LARGEST PUNCHED HOLE: 4.5" NUMBER OF TURRET STATIONS:

Tonnage: 33T

Simi Valley, CA
View Listing

WILT BOTTOM LOAD 2000 F ELECTRIC FURNACE 60"W 24"L 19"H

$RFQ

ELECTRICALLY HEATED BOTTOM LOAD FURNACE WITH COIL TYPE HEATING ELEMENTS AND LIGHT WEIGHT REFRACTORY WALLS AND ROOF IS LIFTED ELECTRICALLY (WITH COUNTER WEIGHT ASSISTANCE) FROM THE BRICK LINED BASE.

Chamber width: 60"
Chamber length: 24"

Tolland, CT
View Listing

POREBA TCG-160-10M Lathe

$109,000

Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"

Swing: 90"

Vinton, TX
View Listing

POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT

Tolland, CT
View Listing

WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H

$RFQ

AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU

Chamber width: 96"
Chamber length: 96"

Tolland, CT
View Listing

EGLOFF & GRAPER ARGON ATMOSOHERE CONVEYOR FURNACE FOR 6" BILLETS

$RFQ

ELECTRICALLY HEATED ATMOSPHERE CONVEYOR FURNACE DESIGNED TO HEAT 6"DIA X 12"LONG MAGNESIUM/ALUMINUM BILLETS PRIOR TO FORGING UNDER ARGON ATMOSPHERE. BILLETS ARE LOADED AND UNLOADED FROM THE TOP BY A SLIDING DO

Chamber width: 18"
Chamber length: 175"

Tolland, CT
View Listing

ACE BURN OFF OVEN 36"W 36"L 47"H

$RFQ

ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE

Tolland, CT
View Listing

LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND STEEL PLATE FLOOR. HEAT (1,200,000 BTU/HR MAX.) IS SUPPLIED BY GAS FIRED PACKAGE BURNER FIRING INTO ROOF MOUNTED COMBUSTION CHAMBER, HEATED AIR ENTERS WORK AREA VIA

Chamber width: 72"
Chamber length: 72"

Tolland, CT
View Listing

GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H

$RFQ

UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10

Chamber width: 120"
Chamber length: 264"

Tolland, CT
View Listing

POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H

$RFQ

SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. HEAT FOR THE WORK CHAMBER AND AFTERBURNER IS SUPPLIED BY A PACKAGE BURNER FOR EACH CHAMBER (390,000 BTU/HR. MAX TOTAL). INNER WALLS, ROO

Tolland, CT
View Listing

GLOBAL FINISHING 500 F WALK IN OVEN, 8'W 8'L 8'H GAS FIRED

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS PACKAGE BURNER AND BELT DRIVEN CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURN T

Chamber width: 96"
Chamber length: 96"

Tolland, CT
View Listing

HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER

$RFQ

ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION

Tolland, CT
View Listing

STEELMAN 500 F WALK IN OVEN 3'W 3'L 3'H

$RFQ

DOUBLE DOOR OPENING WITH PRESSURE LATCH AND STEEL PLATE FLOOR. HEAT IS SUPPLIED BY MAXON GAS BURNER FIRING INTO REAR MOUNT COMBUSTION CHAMBER WITH CIRCULATING FAN. ROOF MOUNTED POWER EXHAUST IS INCLUDED. MANUFACTURED 2

Chamber width: 36"
Chamber length: 36"

Tolland, CT
View Listing

DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H

$RFQ

DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER

Chamber width: 72"
Chamber length: 120"

Tolland, CT
View Listing

DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H

$RFQ

DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE

Chamber width: 47"
Chamber length: 30"

Tolland, CT
View Listing

STUDER S 141 CNC INTERNAL GRINDERS NEW: 2023 | AG 86134

$RFQ

SPECS: INTERNAL DIAMETER: 140 MM GRINDING DEPTH: 250 MM SWING DIAMETER: 400 MM GRINDING LENGTH:

Simi Valley, CA
View Listing

Grieve 36"W x 36"H x 36", 400F Cabinet Oven model 333

$RFQ

Bench type cabinet oven, Grieve model 333, 36" x 36" x 36" work area, stainless steel interior, horizontal/vertical air-flow, 230V single phase, 6.6KW, solid state indicating controls, (3) shelves, operati

Chamber width: 36"
Chamber length: 36"

SOUTH WINDSOR, CT
View Listing

OKUMA GENOS L2000-e CNC LATHE NEW: 2020 | JS 86133

$RFQ

SPECS: X-TRAVEL: 6.50" Z-TRAVEL: 18.50" DISTANCE BETWEEN CENTERS: 20" MAX SWING OVER BED: 17.72" MAX TURNING / CUTTING LENGTH: 19.69" MAX CUTTING / TURNING DIAMETER: 9.06" SPINDLE- B

Swing: 17.72"
Centers: 19.69"

Simi Valley, CA
View Listing

Mazak Integrex i-400S CNC Mill Turn, 15" 3-jaw chks, 26" swng. 59

$RFQ

MAZAK INTEGREX I-400S CNC MILL TURN Model Integrex i-400S, New 2013 Stock # Q11971 EQUIPPED WITH: Mazak Mazatrol Matrix 2 CNC Control, Full 5-Axis Machining Capability, (2) Kitagawa 15" 3-Jaw Chucks on Main &a

Swing: 25.91"
Centers: 59.8"

Cincinnati, OH
View Listing

Budgit 3 Ton Electric Chain Hoist

$RFQ

Budgit 3 Ton Electric Chain Hoist S/N: 198573, Stock No: 020073 Model: 113458-13 Capacity: 3 Ton Lift: 10’ Pushbutton Pendant Manual Trolly Electrics: 240/480V (Currently Wired 240V), 3 Phase

Lifting capacity: 3T
Lift height: 10'

Nashville, TN
View Listing

Durmazlar CNC HAP 2060 S Press Brake

$19,000

Type: Hydraulic Capacity: 60ton Bed length: 6' 8" Between housings: 5' 6" Stroke: 10" Depth of Throat: 16" HP: 10 Weight: 11,244lbs Dimensions: 100" x 180" x 110"

Vinton, TX
View Listing

MAZAK QT-EZ8 MSY CNC LATHE NEW: 2021 | MM 86131

$RFQ

SPECS: CAPACITY- MAXIMUM SWING 27.40” MAXIMUM MACHINING DIAMETER 13.5” STANDARD MACH

Swing: 27.4"
Centers: 20.78"

Simi Valley, CA
View Listing

2007 Daewoo Lynx 200 2-Axis CNC Lathe

$RFQ

2007 Daewoo Lynx 200 2-Axis CNC Lathe SPECIFICATIONS: SWING 18.11" CHUCK SIZE 8" BAR CAPACITY 1.5" POWER 10 hp MAX RPM 5,000 RPM TURNING DIA 11.02" TAILSTOCK

Livonia, MI
View Listing

CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998

$RFQ

CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998 2 Machines Available…. S/N 469-94 GE Fanuc 21M Control Specifications Axis X 550 mm Axis Y 300 mm Axis Z 425 mm Rotary table (4th axis) n

Livonia, MI
View Listing

buy & sell, new & used machinery, machine tools & equipment

Machines currently for sale: