buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 50 of 21483 matches
Sort by:
Items Per Page:  20 |  50  |  100
Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
$RFQ
Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
Reference #43761 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
  • X axis measuring range: 47.44"
  • Y axis measuring range: 118.31"
    Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
    $RFQ
    Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
    Reference #43748 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
    • X axis measuring range: 47.44"
    • Y axis measuring range: 118.31"
      4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
      $RFQ
      4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
      SPECIFICATIONS: Drill Capacity 1” Diameter Drill Head Stroke 18” Spindle Horsepower (4) at 10 HP Each Number of Drill Bases 2 Number of Spindles 4 Feed Rate .1 IPM to 30.0 IPM Rapid Retraction of Drill Head
      Pines 5T CNC Vertical Tube Bender
      $RFQ
      Pines 5T CNC Vertical Tube Bender
      Pines 5T CNC Vertical Tube Bender S/N: 44362-72391, Stock No: 87358 Model: 5T Remanufactured by PR Machine Capacity: 1-1/4" OD x .065 Wall Max Bending Angle: 140° Min Centerline Radius: 3 Times Tube Diame
      • Maximum diameter: 1.25"
        Lemas Roller TR120/5
        $25,000
        Lemas Roller TR120/5
        Lemas Roller, Model TR 120/5. 5', 10 gage machine. This machine is essentially brand new. It was purchased in error and was not what the folks on our shop floor were looking for. 480V 3 phase. Virtually never us
        • Width: 60"
        • Thickness: 0.135"
          Flow Waterjet - Mach 3 w Dynamic Head
          $38,000
          Flow Waterjet - Mach 3 w Dynamic Head
          Flow waterjet, Mach 3 w dynamic head. 480V, 55K PSI, 4'x8'. 2010 model with direct drive, 30HP pump. One owner. Meticulous maintenance with records to back it up. The only issue to disclose is that the abras
          • Output Pressure: 55000PSI
          • Motor: 30HP
            KITAMURA MYCENTER 2XIF
            $12,950
            KITAMURA MYCENTER 2XIF
            FANUC 16iM, 20,000 RPM, PALLET CHANGER, 24 ATC
            • X axis: 20"
            • Y axis: 14"
              Bison 4" x 3 MT 3 Jaw Self-Centering Rotating Chuck
              $875
              Bison 4" x 3 MT 3 Jaw Self-Centering Rotating Chuck
              Bison 4" x 3 MT 3 Jaw Self-Centering Rotating Chuck Year of Mfg: 2013 Part No. 7-860-0400 Size: 100 mm (4") Mounting Type: Morse Taper Mounting Taper Size: 3 Number Of Jaws: 3 Type Of Jaws: S
              6" Manual 3 Jaw Lathe Chuck
              $250
              6" Manual 3 Jaw Lathe Chuck
              6" Manual 3 Jaw Lathe Chuck Year of Mfg: 2013 Chuck Type: Self-Centering Chuck Diameter: 6" Number Of Jaws: 3 Mount Type: Plain Back Body Material: Cast Iron Adjustable: No Number of Jaw Piec
              2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
              $96,500
              2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
              Equipment located in Salem, OR. 2004 Peterson 2400B Recycler T/A Horizontal Grinder, Cat C15 Diesel Engine, Hyd Transmission, 580 Hp, Feed System, 24 Fixed Hammer, Hour Meter Reads: 113 (Unverified), S/N: 17B-177-842
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering
              $250
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering Year of Mfg: 2013 *New In Box, 2 Available* Chuck Type Self-Centering Chuck Diameter: 4" / 101.6 mm Number Of Jaws: 3 Mount Type: Plain Back
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering
              $225
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering
              Manual 4" Lathe Chuck - 3 Jaw, Self Centering Year of Mfg: 2013 *Used, 2 Available* Chuck Type Self-Centering Chuck Diameter: 4" / 101.6 mm Number Of Jaws: 3 Mount Type: Plain Back Body
              Greenerd 150 Ton Hydraulic Press
              $RFQ
              Greenerd 150 Ton Hydraulic Press
              Greenerd 150 Ton Hydraulic Press S/N: 03T6354, Mfg: 2004, Stock No: 87357 Model: 4D-150-144 x 48-20S Capacity: 150 Tons Adjustable Stroke Adjustable Tonnage Greenerd Control Motor: 30 HP 480V/3Ph Overall Dimen
              • Tonnage: 150T
                Greenerd 150 Ton Hydraulic Press
                $RFQ
                Greenerd 150 Ton Hydraulic Press
                Greenerd 150 Ton Hydraulic Press S/N: 03T6354, Mfg: 2004, Stock No: 87357 Model: 4D-150-144 x 48-20S Capacity: 150 Tons Adjustable Stroke Adjustable Tonnage Greenerd Control Motor: 30 HP 480V/3Ph Overall Dimen
                • Tonnage: 150T
                  2015 - 33 Ton / 4,000 Watt Amada EMLK-3610NT CNC Punch/Laser Combo
                  $RFQ
                  2015 - 33 Ton / 4,000 Watt Amada EMLK-3610NT CNC Punch/Laser Combo
                  Capacity 33 Tons Y-Axis Travel 60" X-Axis Travel 100" Rapid Traverse (X-Axis) 3937 IPM Rapid Traverse (Y-Axis) 3149 IPM Rapid Traverse (YL-Axis) 3149 IPM Rapid Traverse (Z-Axis) 2362 IPM Turret Configura
                  2015 - 33 Ton / 4,000 Watt Amada EMLK-3610NT CNC Punch/Laser Combo
                  $RFQ
                  2015 - 33 Ton / 4,000 Watt Amada EMLK-3610NT CNC Punch/Laser Combo
                  Capacity 33 Tons Y-Axis Travel 60" X-Axis Travel 100" Rapid Traverse (X-Axis) 3937 IPM Rapid Traverse (Y-Axis) 3149 IPM Rapid Traverse (YL-Axis) 3149 IPM Rapid Traverse (Z-Axis) 2362 IPM Turret Configura
                  Okuma Captain L370M CNC Turning Center with Live Milling
                  $RFQ
                  Okuma Captain L370M CNC Turning Center with Live Milling
                  Reference #43790 Okuma Captain L370M CNC Turning Center with Live Milling FEATURES: OSP-P200L CNC Control 12-Position Turret Live Milling Tailstock Chip Conveyor CAPACITIES: Swing Over Bed ..................
                  • Swing: 20.87"
                  • Centers: 20.47"
                    Cincinnati Monoset MT2 Tool & Cutter Grinder with .0001 3 Axis DRO
                    $RFQ
                    Cincinnati Monoset MT2 Tool & Cutter Grinder with .0001 3 Axis DRO
                    Cincinnati Monset MT2 Tool & Cutter Grinder with .0001 3Axis DRO Grinder with Tooling. Comes equipped with DC Spinning Motor with RPM Control, Special Automatic Oilers, New Spindle Bearings, Brand New 3 Axis .0001
                    Cincinnati Milacron Monoset MT2 Tool & Cutter Grinder with .0001 3 Axis
                    $RFQ
                    Cincinnati Milacron Monoset MT2 Tool & Cutter Grinder with .0001 3 Axis
                    1989 Cincinnati Milacron Monoset MT2 Tool & Cutter Grinder with .0001 3 Axis Digital Readout Includes all Standard Tooling, Collets 1/8", 3/16", 1/4", 5/16, 3/8" & 1/2" A Collets and 5/8
                    Cincinnati Monoset MT2 Tool & Cutter Grinder with .0001 - 3 Axis DRO
                    $RFQ
                    Cincinnati Monoset MT2 Tool & Cutter Grinder with .0001 - 3 Axis DRO
                    Includes all Standard Tooling, Collets 1/8", 3/16", 1/4", 5/16, 3/8" & 1/2" A Collets and 5/8", 3/4", 7/8", 1", 1-1/8", & 1-1/4" C Collets. 3 Index Plates #8
                    3/16" x 12' Cincinnati Model 1412 Mechanical Squaring Shear
                    $RFQ
                    3/16" x 12' Cincinnati Model 1412 Mechanical Squaring Shear
                    Overall Cutting Length 12' Capacity 3/16" Rake Angle 1/4" # of Holddowns 13 Throat Gap 18" Back Gauge Range 36" Equipped with: Font Operated Digital BG squaring Arm 3 Support Arms Foot
                    • Maximum thickness: 0.187"
                    • Cutting length: 144"
                      2000 - 33 Ton Amada 358 King II CNC Turret Punch
                      $RFQ
                      2000 - 33 Ton Amada 358 King II CNC Turret Punch
                      Capacity 33 Ton Max Sheet Size (w/o repo) 60" x 78.74" Max Sheet Size (w/ repo) 60" x 157.48" Maximum Hole Size (in 10 gauge) 3.5" Maximum Hit Rate on 1" Centers 326 IPM Turret Style Th
                      • Tonnage: 33T
                        2000 Amada MP-1225NJ Loader
                        $RFQ
                        2000 Amada MP-1225NJ Loader
                        Minimum Sheet Size 11.8"x27.5" Maximum Stack Height 10.25" Includes 4" Skid Material Weight Capacity 4,400 LBS Material Thickness 24 ga.-10 ga. Cycle Time (Load/Unload) 25 Seconds Approx. Machine
                        Haas VF4 CNC Vertical Machining Center
                        $RFQ
                        Haas VF4 CNC Vertical Machining Center
                        Reference #43789 Haas VF4 CNC Vertical Machining Center FEATURES: Haas CNC Control 24-Position SMATC Thru-Spindle Coolant Chip Auger SPECIFICATIONS: X-Axis ................................ 50" Y-Axis
                        • X axis: 50"
                        • Y axis: 20"
                          Haas VF4 CNC Vertical Machining Center
                          $RFQ
                          Haas VF4 CNC Vertical Machining Center
                          Reference #43788 Haas VF4 CNC Vertical Machining Center FEATURES: Haas 4-Axis CNC Control 24-Position SMATC 30 HP Motor Thru-Spindle Coolant Chip Auger SPECIFICATIONS: X-Axis ..............................
                          • X axis: 50"
                          • Y axis: 20"
                            2021 Laguna Swift CNC Router 4' x 4' RTR#4103134-01
                            $10,000
                            2021 Laguna Swift CNC Router 4' x 4' RTR#4103134-01
                            Equipment located in San Antonio, TX. 2021 Laguna Swift CNC Router 4' x 4' Cutting Area, 3 Hp Liquid Cooled Spindle, Tooling, Single Phase/ 208-220v/ 60Hz, Model: MCNC Swift, Serial No: 021023745, w/ Quick 10
                            Mazak Integrex j-400 CNC Mill Turn, Mazak SmoothG CNC, 12" Chuck, 25&q
                            $RFQ
                            Mazak Integrex j-400 CNC Mill Turn, Mazak SmoothG CNC, 12" Chuck, 25&q
                            MAZAK INTEGREX J-400 CNC MILL TURN Model Integrex j-400, New 2016 Stock # Q11972 EQUIPPED WITH: Mazak SmoothG CNC Control, 12" 3-Jaw Chuck, 12000 RPM Universal Milling Head (B-Axis), Capto C6 Milling Taper, Y-
                            • Swing: 25.2"
                              Band Saw 14" 1/1 Delta
                              $899
                              Band Saw 14" 1/1 Delta
                              Band Saw 14" 1/1 Delta Model: 28-212/52-977 [Delta] S/N: 01566010 14" Closed Stand Band Saw w/Rip Fence & Miter Gauge 1Hp; 1Ph; 115Volt
                              Sander B/D 6"x48"x12" BT Jet
                              $999
                              Sander B/D 6"x48"x12" BT Jet
                              Sander B/D 6"x48"x12" BT Jet Model: 708599 JSG-6DC [Jet] S/N: 12040835 6" x 48" x 12" Belt/Disc Sander w/Open Stand 1-1/2Hp; 1Ph; 115Volt
                              2013 Cat 320E Crawler Excavator w/ Extras RTR#4053207-01
                              $118,000
                              2013 Cat 320E Crawler Excavator w/ Extras RTR#4053207-01
                              Unit located in Port Angeles, WA. 2013 Cat 320E Crawler Excavator w/ Grapple Claw, (2) Buckets & Promac Brush Cutter, Cat C6.6 Diesel Engine, Hyd Transmission, Enclosed Cab, Air Ride Seat, Hyd Thumb, ROPS, A/C, H
                              DAVI MCA 3028 1/2" x 10' CNC 4-Roll Hydraulic Plate Roll
                              $RFQ
                              DAVI MCA 3028 1/2" x 10' CNC 4-Roll Hydraulic Plate Roll
                              Reference #43656 DAVI MCA 3028 1/2" x 10' CNC 4-Roll Hydraulic Plate Roll FEATURES: Davi CNC Control Interpolation Package for Manual Programming Custom Swingable Overhead Vertical Support Top & Lowe
                              • Thickness: 0.5"
                                90" KING CNC VTL
                                $29,500
                                90" KING CNC VTL
                                RETROFITTED AROUND 2015 WITH FAGOR 8065 TC CONTROL, 96" SWING, 72" UNDER RAIL, 4 JAW 90" CHUCK
                                • Swing: 96"
                                  2007 - 88 Ton Amada FBD-8020NT CNC Press Brake
                                  $RFQ
                                  2007 - 88 Ton Amada FBD-8020NT CNC Press Brake
                                  Capacity 88 Tons Overall Bending Length 78.7" Distance Between Housings 66.9" Stroke 5.91" Open Height 16.54" Throat 15.75" Weight 11,023 lbs. Overall Dimensions (approx.) 130" x 102&
                                  • Tonnage: 88T
                                    2000 - 55 Ton Amada FBD-5020NT CNC Press Brake
                                    $RFQ
                                    2000 - 55 Ton Amada FBD-5020NT CNC Press Brake
                                    Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Weight 6500 lbs. Equ
                                    • Tonnage: 55T
                                      2000 - 55 Ton Amada FBD-5020NT CNC Press Brake
                                      $RFQ
                                      2000 - 55 Ton Amada FBD-5020NT CNC Press Brake
                                      Capacity 55 Tons Overall Bending Length 82" Distance Between Housings 59.84" Stroke 3.9" Open Height 14.57" Throat 15.75" Closed Height 10.67" Main Motor 5 HP Weight 6500 lbs. Equ
                                      • Tonnage: 55T
                                        2013 - 88 Ton Amada HDS-8025NT Hybrid Press Brake
                                        $RFQ
                                        2013 - 88 Ton Amada HDS-8025NT Hybrid Press Brake
                                        Capacity 88 Tons Overall Bending Length 102" Distance Between End Frames 86.6" Length of Stroke 7.87" Open Height 19.7" Throat Depth 16.3 Fast Approach Speed 472 IPM Slow Bend Speed 47 IPM Fas
                                        • Tonnage: 88T
                                          2015 - 143 Ton Amada HG-1303 Hybrid Press Brake
                                          $RFQ
                                          2015 - 143 Ton Amada HG-1303 Hybrid Press Brake
                                          Capacity 143 Ton Overall Bending Length 122.4" Distance Between housings 106.3" Stroke 9.8" Open Height 20.5" Throat 17.7" Dimensions (approx) 215" x 104.9" x 120"H Weight 2
                                          • Tonnage: 143T
                                            2015 NLB 20305DG Water Blaster, 20,000 PSI RTR#4093093-01
                                            $75,000
                                            2015 NLB 20305DG Water Blaster, 20,000 PSI RTR#4093093-01
                                            Unit located in Boutte, LA. 2015 NLB 20305DG Water Blaster, 23 GPM, 20,000 PSI., CAT 7.1 L Diesel Powered, Hours Showing: 3618.5, Serial No: U513030-2, w/ 2015 NLB T/A Trailer, VIN: 1N9M2U320FW329341 All equipment is
                                            DOOSAN PUMA 300 MC CNC LATHE NEW: 2015| MM 86195
                                            $RFQ
                                            DOOSAN PUMA 300 MC CNC LATHE NEW: 2015| MM 86195
                                            SPECS: Bar Capacity: 4.05" Chuck Size: 12" Spindle Speed: 2,800 RPM Spindle Motor: 30 HP X Axis Travel: 9.8" Z Axis Travel: 26.8" Rapid Rate Z Axis: 945 IPM Turret Tools: 12 Station Rapid Rat
                                            • Swing: 23.2"
                                            • Centers: 27.1"
                                              3/16" Blue Valley #72 Elliptical Shear/Flanger, 120" dia, VS cont
                                              $RFQ
                                              3/16" Blue Valley #72 Elliptical Shear/Flanger, 120" dia, VS cont
                                              . We are please to offer for your consideration: (1) 3/16" Blue Valley #72 Elliptical Flanger & Shear Price: On Request Model: #72 Serial: 72879 Year: 1979 Maximum thickness, mild steel:
                                              • Thickness: 0.187"
                                                Reishauer Model RZ362A CNC Gear Grinder
                                                $RFQ
                                                Reishauer Model RZ362A CNC Gear Grinder
                                                SPECIFICATIONS: Maximum Wheel Diameter 14.17” Maximum Module 0.275” Minimum Module 0.0039” Slide Stroke 6.88” Maximum Helix Angle ± 45° Maximum Number of Teeth 600 Minimum Number of Teeth 6 Maximum Work
                                                537 GLEASON Automatic Cycle Quenching Press
                                                $RFQ
                                                537 GLEASON Automatic Cycle Quenching Press
                                                suitable for quenching automotive and truck size ring gears, as well as other round, flat, or cylindrical parts up to 28" (711mm) diameter by 8"
                                                Reishauer Model RZ362A CNC Gear Grinder
                                                $RFQ
                                                Reishauer Model RZ362A CNC Gear Grinder
                                                SPECIFICATIONS: Maximum Wheel Diameter 14.17” Maximum Module 0.275” Minimum Module 0.0039” Slide Stroke 6.88” Maximum Helix Angle ± 45° Maximum Number of Teeth 600 Minimum Number of Teeth 6 Maximum Work
                                                340-20 Cincinnati Milacron ‘Twin Grip’ Centerless Grinder
                                                $RFQ
                                                340-20 Cincinnati Milacron ‘Twin Grip’ Centerless Grinder
                                                SPECIFICATIONS: Work Diameter Capacity Maximum (With New Wheel) 6" Work Diameter Capacity Nominal 1/2" to 3" Grinding Wheel Diameter, Maximum 24" Grinding Wheel Diameter, Minimum 16" Grind
                                                IEMCA KID 80 CNC Barfeeder
                                                $RFQ
                                                IEMCA KID 80 CNC Barfeeder
                                                IEMCA KID 80 CNC Barfeeder Year of Mfg: 2010 Bar Diameter: 0.2 - 3.15" Bar Length: 3.54" - 63.58" Bar Changeover Time: 30 seconds Bar Types: Round, hexagonal, and square bars Fixed Headstock:
                                                • Maximum bar diameter: 3.15"
                                                • Maximum bar length: 63.58'
                                                  HARDING CHNC -II CNC TURRET LATHE
                                                  $4,950
                                                  HARDING CHNC -II CNC TURRET LATHE
                                                  FANUC CONTROL, 8 STATION TURRET, 16C COLLET, 5000 RPM, 7.4 HP
                                                  • Swing: 14"
                                                  • Centers: 12.5"
                                                    OKUMA LB3000EXII MYW 800 BB CNC LATHE NEW: 2017| IH 86197
                                                    $RFQ
                                                    OKUMA LB3000EXII MYW 800 BB CNC LATHE NEW: 2017| IH 86197
                                                    SPECS: SWING OVER BED 22.83" SWING OVER SADDLE 18.5" MAX CUTTING DIAMETER 13.39" MAX CUTTING LENGTH 37.4" X-AXIS TRAVEL
                                                    • Swing: 22.83"
                                                    • Centers: 37.4"
                                                      WELE CNC 5 FACE DOUBLE COLUMN MACHINING CENTER
                                                      $RFQ
                                                      WELE CNC 5 FACE DOUBLE COLUMN MACHINING CENTER
                                                      Reference #43756 WELE CNC 5 FACE DOUBLE COLUMN MACHINING CENTER Features: FANUC 0iMF Plus CNC Control w/ 15" LCD Screen 60-Station Automatic Tool Changer Automatic Attachment Changer CNC Universal Head
                                                      Doosan Puma MX1600ST CNC Turning & Milling Center
                                                      $RFQ
                                                      Doosan Puma MX1600ST CNC Turning & Milling Center
                                                      Reference #43726 Doosan Puma MX1600ST CNC Turning & Milling Center FEATURES: Fanuc 31i-B5 CNC Control B-Axis Milling Spindle 40-Station ATC 16-Station Lower Turret Parts Catcher Chip Blaster Chip Convey
                                                      • Swing: 26.77"
                                                        5.12" Doosan DB130CX CNC Table Type Horizontal Boring Mill
                                                        $RFQ
                                                        5.12" Doosan DB130CX CNC Table Type Horizontal Boring Mill
                                                        Reference #43755 5.12" Doosan DB130CX CNC Table Type Horizontal Boring Mill FEATURES: Fanuc 18i-MB CNC Control 60-Station Automatic Tool Changer Coolant Thru Spindle (20 Bar) Built In B-Axis Rotary Table
                                                        • Spindle diameter: 5.12"
                                                        • X axis travel: 118.11"
                                                          Categories:
                                                          Condition:
                                                          Manufacturer:
                                                          Location:
                                                          Price:
                                                          •  to 
                                                          1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>