buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 251 - 300 of 21482 matches
Sort by:
Items Per Page:  20 |  50  |  100
ACE BURN OFF OVEN 36"W 36"L 47"H
$RFQ
ACE BURN OFF OVEN 36"W 36"L 47"H
ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
$RFQ
LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND STEEL PLATE FLOOR. HEAT (1,200,000 BTU/HR MAX.) IS SUPPLIED BY GAS FIRED PACKAGE BURNER FIRING INTO ROOF MOUNTED COMBUSTION CHAMBER, HEATED AIR ENTERS WORK AREA VIA
  • Chamber width: 72"
  • Chamber length: 72"
    GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
    $RFQ
    GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
    UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
    • Chamber width: 120"
    • Chamber length: 264"
      POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
      $RFQ
      POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
      SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. HEAT FOR THE WORK CHAMBER AND AFTERBURNER IS SUPPLIED BY A PACKAGE BURNER FOR EACH CHAMBER (390,000 BTU/HR. MAX TOTAL). INNER WALLS, ROO
      GLOBAL FINISHING 500 F WALK IN OVEN, 8'W 8'L 8'H GAS FIRED
      $RFQ
      GLOBAL FINISHING 500 F WALK IN OVEN, 8'W 8'L 8'H GAS FIRED
      DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS PACKAGE BURNER AND BELT DRIVEN CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURN T
      • Chamber width: 96"
      • Chamber length: 96"
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        $RFQ
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION
        STEELMAN 500 F WALK IN OVEN 3'W 3'L 3'H
        $RFQ
        STEELMAN 500 F WALK IN OVEN 3'W 3'L 3'H
        DOUBLE DOOR OPENING WITH PRESSURE LATCH AND STEEL PLATE FLOOR. HEAT IS SUPPLIED BY MAXON GAS BURNER FIRING INTO REAR MOUNT COMBUSTION CHAMBER WITH CIRCULATING FAN. ROOF MOUNTED POWER EXHAUST IS INCLUDED. MANUFACTURED 2
        • Chamber width: 36"
        • Chamber length: 36"
          DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
          $RFQ
          DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
          DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
          • Chamber width: 72"
          • Chamber length: 120"
            DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
            $RFQ
            DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
            DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
            • Chamber width: 72"
            • Chamber length: 120"
              DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
              $RFQ
              DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
              DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE
              • Chamber width: 47"
              • Chamber length: 30"
                STUDER S 141 CNC INTERNAL GRINDERS NEW: 2023 | AG 86134
                $RFQ
                STUDER S 141 CNC INTERNAL GRINDERS NEW: 2023 | AG 86134
                SPECS: INTERNAL DIAMETER: 140 MM GRINDING DEPTH: 250 MM SWING DIAMETER: 400 MM GRINDING LENGTH:
                POLLUTION CONTROL PRC 111 54"W 54"L 66"H
                $RFQ
                POLLUTION CONTROL PRC 111 54"W 54"L 66"H
                SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTER B
                Grieve 36"W x 36"H x 36", 400F Cabinet Oven model 333
                $RFQ
                Grieve 36"W x 36"H x 36", 400F Cabinet Oven model 333
                Bench type cabinet oven, Grieve model 333, 36" x 36" x 36" work area, stainless steel interior, horizontal/vertical air-flow, 230V single phase, 6.6KW, solid state indicating controls, (3) shelves, operati
                • Chamber width: 36"
                • Chamber length: 36"
                  OKUMA GENOS L2000-e CNC LATHE NEW: 2020 | JS 86133
                  $RFQ
                  OKUMA GENOS L2000-e CNC LATHE NEW: 2020 | JS 86133
                  SPECS: X-TRAVEL: 6.50" Z-TRAVEL: 18.50" DISTANCE BETWEEN CENTERS: 20" MAX SWING OVER BED: 17.72" MAX TURNING / CUTTING LENGTH: 19.69" MAX CUTTING / TURNING DIAMETER: 9.06" SPINDLE- B
                  • Swing: 17.72"
                  • Centers: 19.69"
                    Mazak Integrex i-400S CNC Mill Turn, 15" 3-jaw chks, 26" swng. 59
                    $RFQ
                    Mazak Integrex i-400S CNC Mill Turn, 15" 3-jaw chks, 26" swng. 59
                    MAZAK INTEGREX I-400S CNC MILL TURN Model Integrex i-400S, New 2013 Stock # Q11971 EQUIPPED WITH: Mazak Mazatrol Matrix 2 CNC Control, Full 5-Axis Machining Capability, (2) Kitagawa 15" 3-Jaw Chucks on Main &a
                    • Swing: 25.91"
                    • Centers: 59.8"
                      Budgit 3 Ton Electric Chain Hoist
                      $RFQ
                      Budgit 3 Ton Electric Chain Hoist
                      Budgit 3 Ton Electric Chain Hoist S/N: 198573, Stock No: 020073 Model: 113458-13 Capacity: 3 Ton Lift: 10’ Pushbutton Pendant Manual Trolly Electrics: 240/480V (Currently Wired 240V), 3 Phase
                      • Lifting capacity: 3T
                      • Lift height: 10'
                        Durmazlar CNC HAP 2060 S Press Brake
                        $19,000
                        Durmazlar CNC HAP 2060 S Press Brake
                        Type: Hydraulic Capacity: 60ton Bed length: 6' 8" Between housings: 5' 6" Stroke: 10" Depth of Throat: 16" HP: 10 Weight: 11,244lbs Dimensions: 100" x 180" x 110"
                        MAZAK QT-EZ8 MSY CNC LATHE NEW: 2021 | MM 86131
                        $RFQ
                        MAZAK QT-EZ8 MSY CNC LATHE NEW: 2021 | MM 86131
                        SPECS: CAPACITY- MAXIMUM SWING 27.40” MAXIMUM MACHINING DIAMETER 13.5” STANDARD MACH
                        • Swing: 27.4"
                        • Centers: 20.78"
                          2007 Daewoo Lynx 200 2-Axis CNC Lathe
                          $RFQ
                          2007 Daewoo Lynx 200 2-Axis CNC Lathe
                          2007 Daewoo Lynx 200 2-Axis CNC Lathe SPECIFICATIONS: SWING 18.11" CHUCK SIZE 8" BAR CAPACITY 1.5" POWER 10 hp MAX RPM 5,000 RPM TURNING DIA 11.02" TAILSTOCK
                          CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                          $RFQ
                          CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                          CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998 2 Machines Available…. S/N 469-94 GE Fanuc 21M Control Specifications Axis X 550 mm Axis Y 300 mm Axis Z 425 mm Rotary table (4th axis) n
                          Allis-Chalmers 7500 Pound Forklift
                          $RFQ
                          Allis-Chalmers 7500 Pound Forklift
                          Allis Chalmers 7500 Pound Forklift ***EXCELLENT CONDITION*** Rebuilt Tilt Cylinders New Brakes Hydraulics Serviced Many Seals Have Been Replaced No Leaks
                          • Lifting capacity: 7500T
                            Grieve Cabinet, 56"W x 60"H x 30"L, 350F Stainless interior
                            $RFQ
                            Grieve Cabinet, 56"W x 60"H x 30"L, 350F Stainless interior
                            Large capacity cabinet oven model SB-350, 56"W x 60"H x 30"L work area, type 304 stainless steel interior, horizontal air-flow, Partlow solid state controls, process timer, removable shelves, 208V, 3PH, 14
                            • Chamber width: 56"
                            • Chamber length: 30"
                              HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                              $RFQ
                              HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                              HIGH SPEED CELL LINESStock # 14379High Speed Cell Lines – overviewThe High Speed Celll Lines (HSCL) consist of two production lines. These production lines were designed to manufacture Zinc Chloride cellsin the
                              2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
                              $RFQ
                              2000mm x 3.2mm x 60,000# Bronx High Speed Cut-To-Length Line (14371)
                              Max Weight 60000 pounds Max Coil Width Capacity
                              10' X 3/4" PACIFIC MODEL #600G10, 2001 HYDRAULIC SHEAR: STOCK # 14373
                              $RFQ
                              10' X 3/4" PACIFIC MODEL #600G10, 2001 HYDRAULIC SHEAR: STOCK # 14373
                              10' x 3/4" PACIFIC HYDRAULIC SHEAR Stock: 14373Type Shear:............HydraulicCapacity:..............10' x 3/4"**Temporary Specifications Subject to Revisions****PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE****ALL
                              10,000# x 32" Stamco Recoiler (14374)
                              $RFQ
                              10,000# x 32" Stamco Recoiler (14374)
                              Max Weight of Coil 10000 pounds Stamco RecoilerStock # 14374-Capacity: 10,000# x 32"-Ma
                              20,000 lbs X 32" STAMCO RECOILER (14375)
                              $RFQ
                              20,000 lbs X 32" STAMCO RECOILER (14375)
                              Max Weight of Coil 20000 pounds Stamco RecoilerStock # 14375  20,000# Capacity
                              5/8" Lewis Model 10-F Wire Straightening and Cutting Machine (14376)
                              $RFQ
                              5/8" Lewis Model 10-F Wire Straightening and Cutting Machine (14376)
                              5/8" Lewis Model 10-F Wire Straightening and Cutting MachineStock # 14376Maximum Wire Diameter: 5/8"Maximum Cutoff Length: 12'Feet per Minute: 90-165Weight: 13,500 Lbs. **Temporary Specifications Subject to Revisions****
                              30” x .060” x 20,000# Herr Voss / Red Bud High Speed Blanking Line (14370)
                              $RFQ
                              30” x .060” x 20,000# Herr Voss / Red Bud High Speed Blanking Line (14370)
                              Max Weight 20000 pounds Max Coil Width Capacity
                              72" x .135" x 70,000# Fagor Cut to Length Line with Trapezoid Shear (14369)
                              $RFQ
                              72" x .135" x 70,000# Fagor Cut to Length Line with Trapezoid Shear (14369)
                              Max Weight 70000 pounds Max Coil Width Capacity
                              4,000 Lb DURANT Model MD-403-MVS Motorized Uncoiler (14378)
                              $RFQ
                              4,000 Lb DURANT Model MD-403-MVS Motorized Uncoiler (14378)
                              Max Weight of Coil 4000 pounds Max Width of Coil
                              36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDER: STOCK # 14377
                              $RFQ
                              36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDER: STOCK # 14377
                              36" BLANCHARD MODEL #20K ROTARY SURFACE GRINDERSTOCK # 14377SERIAL ....111019MODEL ........ 20KNEW IN ................................. 1976DIAMETER OF MAGNETIC CHUCK ............. 36"MAXIMUM SWING INSIDE WATER GUARDS ..
                              Voc Containment Systems 900-SWDD Side Wall Down Draft Spray Booth
                              $RFQ
                              Voc Containment Systems 900-SWDD Side Wall Down Draft Spray Booth
                              VOC CONTAINMENT SYSTEMS 900SWDD SIDE WALL DOWN DRAFT SPRAY BOOTH Stock # Q11965 EQUIPPED WITH: Side Wall Down Draft Paint Booth. Inside Dimensions: 25'-6"x 14'x 9', Outside Dimensions 25'-10&quo
                              Despatch 25" x 25" x 25", 1000F, Class A Cabinet Oven
                              $RFQ
                              Despatch 25" x 25" x 25", 1000F, Class A Cabinet Oven
                              Despatch model ENR0009H100E, 25" x 25" x 25", 1000F, single door, aluminized steel interior, horizontal air-flow, 240V, 3PH, 15KW, solid state indicating control, Partlow MRC-7000 recording hi-limit, solve
                              • Chamber width: 25"
                              • Chamber length: 25"
                                ALMCO 15 CUBIC FOOT TUMBLER/DEBURRING MACHINE
                                $3,950
                                ALMCO 15 CUBIC FOOT TUMBLER/DEBURRING MACHINE
                                MODEL V-125, S/N: J03066
                                Normec Cutting Machine
                                $13,000
                                Normec Cutting Machine
                                For Sale: Cutting Machine with Guillotine Knife 401-01-100 We are selling one cutting machine equipped with a guillotine knife and featuring a cutting width of 100 mm. This installation is specifically designed for cutt
                                Normec Press: 150mm
                                $20,000
                                Normec Press: 150mm
                                For Sale: NorMec Splicing Station Model 110-00-165-BR We are selling 1 NorMec splicing station (model 110-00-165-BR) equipped with B&R control and touch display. This station represents our most advanced model and i
                                Normec Press: 120mm
                                $20,000
                                Normec Press: 120mm
                                For Sale: NorMec Splicing Station Model 110-00-120-BR We are selling 1 NorMec splicing station (model 110-00-120-BR) with a B&R control system and touch display. This station is our most advanced model, designed for
                                Doboy Scotty II Horizontal Flow Wrapper RTR#4083382-01
                                $4,000
                                Doboy Scotty II Horizontal Flow Wrapper RTR#4083382-01
                                Equipment located in Raleigh, NC. Doboy Scotty II Horizontal Flow Wrapper With Markem Coder, 4.5 Amps, 220 V, 60Hz, S/N:94-16579 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be
                                BYSTRONIC BYSTAR 4020 FIBER LASER NEW: 2018 | RM 86123
                                $RFQ
                                BYSTRONIC BYSTAR 4020 FIBER LASER NEW: 2018 | RM 86123
                                SPECS: SHEET WIDTH 80" SHEET LENGTH 160" POWER (WATTAGE) 6000 W MAX WORKPIECE W
                                • Wattage: 6000W
                                • X axis travel: 162'
                                  BYSTRONIC XACT SMART 100/3100 PRESS BRAKE, NEW: 2017 | RM 86122
                                  $RFQ
                                  BYSTRONIC XACT SMART 100/3100 PRESS BRAKE, NEW: 2017 | RM 86122
                                  SPECS: TONNAGE: 110 T BENDING LENGTH: 122.1" TABLE WIDTH: 2.37" STANDARD STROKE: 7.9" THROAT: 15.8" OPEN HEIGHT: 18.4" X-AXIS TRAVEL: 23.7" X-AXIS SPE
                                  • Tonnage: 110T
                                    Haas TM-2 CNC Toolroom Mill Vertical Machining Center
                                    $RFQ
                                    Haas TM-2 CNC Toolroom Mill Vertical Machining Center
                                    Haas TM-2 CNC Toolroom Mill Vertical Machining Center Year of Mfg: 2008 CNC Control: Haas CNC Table Area: 57.75" x 10.5" Travels: X Axis: 40" Y Axis: 16" Z Axis: 16" Spindle
                                    • X axis: 40"
                                    • Y axis: 16"
                                      6” x 51” Hey No. 3 Double End Facing and Centering Machine
                                      $RFQ
                                      6” x 51” Hey No. 3 Double End Facing and Centering Machine
                                      SPECIFICATIONS: Maximum Diameter Work Held in Standard Vise 6.25” Maximum Diameter Work .25” Maximum Work Length 51” Maximum Length (Held in Two Vises) 3” Minimum Length (Held in One Vise) .75” Maximum Diameter Adm
                                      YAMA SEIKI GV-780M CNC LATHE NEW: 2015 | AG 86116
                                      $RFQ
                                      YAMA SEIKI GV-780M CNC LATHE NEW: 2015 | AG 86116
                                      SPECS: MAXIMUM SWING 33.4" MAXIMUM TURNING DIAMETER 32.2" MAXIMUM CUTTING HEIGHT 25.9" X AXIS TRAVEL 19.6" Z AXIS TRAVEL
                                      • Swing: 33.4"
                                        JET VBS-2012VS-DC 20 in. Continuous Variable Speed Vertical Bandsaw
                                        $RFQ
                                        JET VBS-2012VS-DC 20 in. Continuous Variable Speed Vertical Bandsaw
                                        CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
                                        • Throat capacity: 20"
                                          JET VBS-1813VS-DC 18 in. Continuous Variable Speed Vertical Bandsaw
                                          $RFQ
                                          JET VBS-1813VS-DC 18 in. Continuous Variable Speed Vertical Bandsaw
                                          CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
                                          • Throat capacity: 18"
                                            JET VBS-1207VS-DC 12 in. Continuous Variable Speed Vertical Bandsaw
                                            $RFQ
                                            JET VBS-1207VS-DC 12 in. Continuous Variable Speed Vertical Bandsaw
                                            CALL 386-304-3720 FOR AVAILABILITY *EFFORTLESS OPERATION These Bandsaws feature seamless speed adjustments, a precision laser guide for accurate cutting, and an efficient chip blower to keep the blade area clean.
                                            • Throat capacity: 12"
                                              Bushman Equipment ITNAC Flip-Rite 5-Ton Materials Handling System, Like New
                                              $RFQ
                                              Bushman Equipment ITNAC Flip-Rite 5-Ton Materials Handling System, Like New
                                              BUSHMAN ITNAC FLIP-RITE 5-TON MATERIAL FLIPPER Model FR, New 2018 Stock # Q11962 EQUIPPED WITH: Diamond Knurled Drum, Wireless Pendent Controller with Transmitter. SPECIFICATIONS: Max Load Capacity.............
                                              Est 2023 Apollo A-1030 Electric Pallet Jack RTR#4083425-03
                                              $1,400
                                              Est 2023 Apollo A-1030 Electric Pallet Jack RTR#4083425-03
                                              Equipment located in Raleigh, NC. Est 2023 Apollo A-1030 Electric Pallet Jack, 4,400lb Capacity, 48"x27" Forks, 7" Lift Height, Hour Meter Reads: 33.7 (Unverified). All equipment is sold “As Is, Where I
                                              MORI SEIKI CL-1500 CNC LATHE NEW: 2012 | JS 86115
                                              $RFQ
                                              MORI SEIKI CL-1500 CNC LATHE NEW: 2012 | JS 86115
                                              SPECS: 2 AXIS SPINDLE SPEED: 6,000 RPM X-AXIS TRAVEL: 9.7" Z-AXIS TRAVEL: 14.5" RAPID TRAVERSE (X,Z): 944 IPM SWING: 20.1" BAR CAPACITY: 1.3" 12-STATION TURRET COOLANT SYSTEM EQUIPPED WIT
                                              • Swing: 20.1"
                                                Categories:
                                                Condition:
                                                Manufacturer:
                                                Location:
                                                Price:
                                                •  to 
                                                1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>