buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 21440 matches
Sort by:
Items Per Page:  20  |  50 |  100
BIRMINGHAM VH-1010-6 10ft x 10ga. Hydraulic Box and Pan Brake
$22,750
BIRMINGHAM VH-1010-6 10ft x 10ga. Hydraulic Box and Pan Brake
CALL 386-304-3720 FOR AVAILABILITY ***Special Promotion - Only 1 In Stock at This Price*** Please verify In Stock BEFORE Ordering Prices Valid on In Stock Machines Only Call for Freight FEATURES: Bending angle
  • Maximum bending capacity: 0.134"
  • Bending length: 120"
    DMG MORI NLX 2500SY/700 CNC LATHE NEW: 2015| AG 86140
    $RFQ
    DMG MORI NLX 2500SY/700 CNC LATHE NEW: 2015| AG 86140
    SPECS: Swing Over Bed 36.4" Turning Diameter 14.4" Turning Length 27.7" Distance Between Spi
    • Swing: 36.4"
    • Centers: 27.7"
      Circ Saw 7-1/4" Worm-drv Skil
      $199
      Circ Saw 7-1/4" Worm-drv Skil
      Circ Saw 7-1/4" Worm-drv Skil Model: 77 [Skil] S/N: HC108819 7-1/4" Worm Gear Circular Saw 13Amp; 1Ph; 120Volt
      2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
      $10,000
      2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
      Equipment located in Raleigh, NC. 2021 Maripak - LMC Series Semi-Automatic - L-Bar Sealer Model: 80/65 v2, 220v, S/N: 17600, With 2021 Maripak T60-1400 H400 Diamond Heat Tunnel, 220v, S/N: 17299 All equipment is sold “
      2018 Vermeer AX19 Trailer Mounted Brush Chipper RTR#4083724-01
      $82,000
      2018 Vermeer AX19 Trailer Mounted Brush Chipper RTR#4083724-01
      Equipment located in Thomaston, GA. 2018 Vermeer AX19 Trailer Mounted Brush Chipper, T/A, John Deere 4045HFC09 Diesel Engine, 173 Hp, Pintle Hitch, Electrical Brakes, Hour Meter Reads:1,287 (Unverified, S/N: 1VRL19252J1
      PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
      $37,995
      PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
      CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Mechanical Power Squaring Shear with Manual Front-Operated Backgauge, Pneumatic Sheet Support Device with Front Return and Material Cart Go-To
      2020 Vermeer SC362 Stump Cutter (Non-Op) RTR#4073446-01
      $13,000
      2020 Vermeer SC362 Stump Cutter (Non-Op) RTR#4073446-01
      Equipment located in O’Fallon, MO. 2020 Vermeer SC362 Stump Cutter (Non-Operational), Briggs & Stratton Vanguard Gas Engine, Hyd Transmission, Two Speed Ground Drive 133ft/min, Yellow Jacket Cutting System 16 teeth,
      Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
      $RFQ
      Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
      CNC Control yes Type of CNC Control Siem
      Matsuura MAM72-70V PC-6 CNC 5-axis Machining Center, New 2021, Tbl. 19.68 x 19.68, 20k Rpm
      $RFQ
      Matsuura MAM72-70V PC-6 CNC 5-axis Machining Center, New 2021, Tbl. 19.68 x 19.68, 20k Rpm
      CNC Control yes Type of CNC Control MATS
      AMADA EMLK 3610 NT CNC TURRET PUNCH NEW: 2014 | RM 86139
      $RFQ
      AMADA EMLK 3610 NT CNC TURRET PUNCH NEW: 2014 | RM 86139
      SPECS: PUNCH CAPACITY: 33 TONS MAX. LASER OUTPUT: 4,000 WATTS MAX. SHEET SIZE: 60" X 200" (WITH ONE AUTO REPO) MAX SHEET THICKNESS: 1/4" MS LARGEST PUNCHED HOLE: 4.5" NUMBER OF TURRET STATIONS:
      • Tonnage: 33T
        WILT BOTTOM LOAD 2000 F ELECTRIC FURNACE 60"W 24"L 19"H
        $RFQ
        WILT BOTTOM LOAD 2000 F ELECTRIC FURNACE 60"W 24"L 19"H
        ELECTRICALLY HEATED BOTTOM LOAD FURNACE WITH COIL TYPE HEATING ELEMENTS AND LIGHT WEIGHT REFRACTORY WALLS AND ROOF IS LIFTED ELECTRICALLY (WITH COUNTER WEIGHT ASSISTANCE) FROM THE BRICK LINED BASE.
        • Chamber width: 60"
        • Chamber length: 24"
          STEELMAN 500 F GAS FIRED WALK IN OVEN 7'W 7'L 7'H
          $RFQ
          STEELMAN 500 F GAS FIRED WALK IN OVEN 7'W 7'L 7'H
          DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT (350, 000 BTU/HR MAX) IS SUPPLIED BY A GAS FIRED PACKAGE BURNER FIRING INTO A REAR MOUNTED COMBUSTION CHAMBER. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE W
          • Chamber width: 84"
          • Chamber length: 84"
            POREBA TCG-160-10M Lathe
            $109,000
            POREBA TCG-160-10M Lathe
            Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
            • Swing: 90"
              POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
              $RFQ
              POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
              DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT
              WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
              $RFQ
              WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
              AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU
              • Chamber width: 96"
              • Chamber length: 96"
                EGLOFF & GRAPER ARGON ATMOSOHERE CONVEYOR FURNACE FOR 6" BILLETS
                $RFQ
                EGLOFF & GRAPER ARGON ATMOSOHERE CONVEYOR FURNACE FOR 6" BILLETS
                ELECTRICALLY HEATED ATMOSPHERE CONVEYOR FURNACE DESIGNED TO HEAT 6"DIA X 12"LONG MAGNESIUM/ALUMINUM BILLETS PRIOR TO FORGING UNDER ARGON ATMOSPHERE. BILLETS ARE LOADED AND UNLOADED FROM THE TOP BY A SLIDING DO
                • Chamber width: 18"
                • Chamber length: 175"
                  ACE BURN OFF OVEN 36"W 36"L 47"H
                  $RFQ
                  ACE BURN OFF OVEN 36"W 36"L 47"H
                  ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
                  LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
                  $RFQ
                  LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
                  DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND STEEL PLATE FLOOR. HEAT (1,200,000 BTU/HR MAX.) IS SUPPLIED BY GAS FIRED PACKAGE BURNER FIRING INTO ROOF MOUNTED COMBUSTION CHAMBER, HEATED AIR ENTERS WORK AREA VIA
                  • Chamber width: 72"
                  • Chamber length: 72"
                    GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
                    $RFQ
                    GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
                    UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
                    • Chamber width: 120"
                    • Chamber length: 264"
                      POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
                      $RFQ
                      POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
                      SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. HEAT FOR THE WORK CHAMBER AND AFTERBURNER IS SUPPLIED BY A PACKAGE BURNER FOR EACH CHAMBER (390,000 BTU/HR. MAX TOTAL). INNER WALLS, ROO
                      Categories:
                      Condition:
                      Manufacturer:
                      Location:
                      Price:
                      •  to 
                      1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>