buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 1801 - 1900 of 21482 matches
Sort by:
Items Per Page:  20 |  50 |  100
Mazak HCN-6800-II CNC 4-Axis Horizontal Machining Cell
$RFQ
Mazak HCN-6800-II CNC 4-Axis Horizontal Machining Cell
Reference #43514 Mazak HCN-6800-II CNC 4-Axis Horizontal Machining Cell with Palletech System FEATURES: (2) Mazak HCN-6800-II CNC Horizontal Machining Centers (2) 330-Position ATC Tool Hives 36-Station Mazak High-
  • X axis: 41.34"
  • Y axis: 35.43"
    ACRA SCH-2290 22 in. Precision Engine Lathe
    $RFQ
    ACRA SCH-2290 22 in. Precision Engine Lathe
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: All castings are properly stabilized and stress relieved. Bedways are hardened and ground min HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed
    • Swing: 22"
    • Centers: 90"
      75,000 lbs ABBEY ETNA HYDRAULIC DRAW BENCH (14353)
      $RFQ
      75,000 lbs ABBEY ETNA HYDRAULIC DRAW BENCH (14353)
      75,000 lbs ABBEY ETNA HYDRAULIC DRAW BENCHStock # 14353Manufacturer:................ABBEY ETNAType:........................Hydraulic Draw BenchPull:........................75,000 lbsLength of Draw:..............50'Power:
      Gardner Denver Model 7-11A Rotary Screw 15 HP Air Compressor, MFG 2015
      $RFQ
      Gardner Denver Model 7-11A Rotary Screw 15 HP Air Compressor, MFG 2015
      Horse Power: 15 Pounds Per Square Inch (PSI): 175 RPM: 3600 Approx. Dimensions: 32" X 73" X 70H" Approx. Weight: 4,500 LBS WITH: 15 Horse Power Motor Wired 480 Volt, 3 Ph., 60 Hz Air Dryer Mode
      • Motor: 15HP
        2016 Doosan DX225LL Crawler Mounted Log Loader RTR# 4051884-01
        $180,000
        2016 Doosan DX225LL Crawler Mounted Log Loader RTR# 4051884-01
        Unit located in Salem, OR. 2016 Doosan DX225LL Crawler Mounted Log Loader w/ 2022 Pierce TC-52 Grapple, DL06 Doosan Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, Air Ride Seat, AM/FM Radio, CD Player, Tape
        Vibratory Test Stand, 500 lb capacity, 29" x 50" Work Table
        $RFQ
        Vibratory Test Stand, 500 lb capacity, 29" x 50" Work Table
        VIBRATORY SHAKER TABLE / VIBRATORY TEST STAND New 2001 Stock# Q10666 EQUIPPED WITH: Adjustable Variable Speed, (8) Quickfist Type Rubber Double Strap Part Clamps on Welded Uprights, Part Size Either 29.5" x 40
        2017 JCB 8029 CTS Mini Excavator w/ Bucket RTR# 4053299-01
        $24,000
        2017 JCB 8029 CTS Mini Excavator w/ Bucket RTR# 4053299-01
        Unit located in San Antonio, TX. 2017 JCB 8029 CTS Mini Excavator w/ Bucket & Blade, Perkins Diesel Engine, Hyd Transmission, Quick Coupler, Hour Meter Reads: 252 (Unverified), S/N: JCB08029JJ2315317 All equipment
        BesCutter 2.0KW Fiber Laser Cleaning Machine RTR# 4051462-01
        $8,000
        BesCutter 2.0KW Fiber Laser Cleaning Machine RTR# 4051462-01
        Equipment located in Fontana, CA. 2023 BesCutter 2.0KW Handheld Fiber Laser Cleaning Machine, 1 Ph / 220v / 60Hz, Laser Generator: Max 2000w, Model: BC-2000W, S/N: BC2304025 All equipment is sold “As Is, Where Is”. Re
        Chevalier ALIC-1 Portable Tool Type Manual Ram EDM, ARFA Milling Machine
        $RFQ
        Chevalier ALIC-1 Portable Tool Type Manual Ram EDM, ARFA Milling Machine
        CHEVALIER ALIC-1 PORTABLE TOOL TYPE MANUAL RAM EDM Model ALIC-1, S/N 0210002, New 2001 Stock # Q11886 EQUIPPED WITH: ARFA MMD-91002K Milling Machine with an Alic-1 EDM Tool Mounted to Spindle powered by a Chevalier
        • Power: 15A
          7" x 12" Rong Fu Horizontal Bandsaw, Model RF-712N, 3/4 HP
          $RFQ
          7" x 12" Rong Fu Horizontal Bandsaw, Model RF-712N, 3/4 HP
          7" x 12" RONG FU HORIZONTAL BAND SAW Model RF-712N, S/N 370029 Stock # Q11887 EQUIPPED WITH: Cast Structure for Mechanical Strength, Adjustable Cutting Angle from 0°- 45º with Vise, Fully Adjust
          6" x 18" Victor 618EVS Precision Toolroom Lathe, DRO, Collet Chuc
          $RFQ
          6" x 18" Victor 618EVS Precision Toolroom Lathe, DRO, Collet Chuc
          6" x 18" VICTOR PRECISION TOOLROOM LATHE Model 618EVS, S/N 9312686, New 2005 Stock # Q11775 EQUIPPED WITH: Digital Read Out, 5C Collet Chuck, Variable Frequency Spindle (4,000 RPM), Compound Cross Slide,
          • Swing: 11"
          • Centers: 18"
            Hyundai Kia SKT 21LMS CNC Lathe
            $RFQ
            Hyundai Kia SKT 21LMS CNC Lathe
            Reference #43510 Hyundai Kia SKT 21LMS CNC Lathe FEATURES: Fanuc Oi-TD CNC Control 12-Position Turret With Live Tooling Sub Spindle (2)16C Collet Chucks LNS Chip Conveyor Misc. Tooling SPECIFICATION: Max
            • Swing: 21.6"
            • Centers: 27.5"
              Messer MetalMaster Xcel Plasma Cutting System
              $RFQ
              Messer MetalMaster Xcel Plasma Cutting System
              Reference #43506 Messer MetalMaster Xcel Plasma Cutting System FEATURES: Messer Global Windows Based CNC Control With 24" LED Color Touchscreen (2)Hypertherm HPR300 X-Definition 300 Amp Plasma Power Supplies
              15" x 7" x 4" Leveling Pads
              $RFQ
              15" x 7" x 4" Leveling Pads
              Reference #43502 15" x 7" x 4" Leveling Pads SPECIFICATION: Overall Dimensions .................... 15" x 7" x 4" Pad Size .............................. 9.625" x 5.625" Ba
              Jet 13" x 40" Manual Lathe
              $RFQ
              Jet 13" x 40" Manual Lathe
              Reference #43134 Jet 13" x 40" Manual Lathe FEATURES: Alloris Tool Post 4-Jaw Manual Chuck (2) 3-Jaw Manual Chucks Assorted Collets SPECIFICATION: Swing Over Bed ........................ 13&quo
              • Swing: 13"
              • Centers: 40"
                Onsrud 5100M12 CNC Router
                $RFQ
                Onsrud 5100M12 CNC Router
                Reference #43495 Onsrud 5100M12 CNC Router FEATURES: Fanuc Oi Handheld Machin Controller System 12 Station Automatic Tool Changer HSD ES929 Spindle Integrated Dust Transition System High Flow Vaccum Zone Vacuum
                Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe
                $RFQ
                Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe
                Reference #43238 Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe FEATURES: 49" 4-Jaw Chuck Power Top Compound for Taper Cutting 6-Way Power Rapid Traverse 24" Dia. Steady Rest 9" Dia
                • Swing: 49.42"
                • Centers: 118.11"
                  Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe
                  $RFQ
                  Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe
                  Reference #43238 Poreba TCG 125 49" x 118" Heavy Duty Manual Lathe FEATURES: 49" 4-Jaw Chuck Power Top Compound for Taper Cutting 6-Way Power Rapid Traverse 24" Dia. Steady Rest 9" Dia
                  • Swing: 49.42"
                  • Centers: 118.11"
                    OKUMA MCV-4020 CNC Vertical Machining Center
                    $RFQ
                    OKUMA MCV-4020 CNC Vertical Machining Center
                    Reference #43497 OKUMA MCV-4020 CNC Vertical Machining Center SPECIFICATIONS: X-Axis Travel ......................... 40" Y-Axis Travel ......................... 20" Z-Axis Travel .......................
                    • X axis: 40"
                    • Y axis: 20"
                      Accurpress 725016 250 Ton x 16' CNC Press Brake
                      $RFQ
                      Accurpress 725016 250 Ton x 16' CNC Press Brake
                      Reference #43488 Accurpress 725016 250 Ton x 16' CNC Press Brake FEATURES: ETS-3000 3-AXIS CNC Control Flush Floor Design CAPACITY: Tonnage Capacity ...................... 250 Ton Overall Length of Bed and
                      • Tonnage: 250T
                        Toshiba BTH130 CNC Table Type Horizontal Boring Mill
                        $RFQ
                        Toshiba BTH130 CNC Table Type Horizontal Boring Mill
                        Reference #43493 Toshiba BTH130 CNC Table Type Horizontal Boring Mill FEATURES: Tosnuc 999 CNC Controls 78.74" x 94.48" Full B-Axis Rotary Table 60-Position Automatic Tool Changer Thru Spindle Coolant
                        • Spindle diameter: 5.12"
                        • X axis travel: 118"
                          Okamoto IGM-2M Micro Processor Controlled Internal Grinder
                          $RFQ
                          Okamoto IGM-2M Micro Processor Controlled Internal Grinder
                          Okamoto IGM-2M Micro Processor Controlled Internal Grinder. 8” Max Diameter. 24” Max Swing. 8” Max Stroke. 20,000 RPM Variable Speed Spindle. Variable Speed Workhead. Dresser. Coolant with Filtration. SPECIFICATIONS:
                          Giddings & Lewis MC-60 6" CNC Horizontal Boring Mill w/Pallet Shut
                          $RFQ
                          Giddings & Lewis MC-60 6" CNC Horizontal Boring Mill w/Pallet Shut
                          Reference #43086 Giddings & Lewis MC-60 6" CNC Horizontal Boring Mill w/Pallet Shuttle Features: 120-Station Automatic Tool Changer 2-Pallet Shuttle 60" x 60" Pallets B-Axis Rotary Table Thru S
                          • Spindle diameter: 6"
                          • X axis travel: 96"
                            Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                            $RFQ
                            Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC In
                            Reference #19686 Giddings & Lewis 360P 72" x 72" CNC Rotary Table & CNC Infeeding Slide ROTARY TABLE: Table Size ............................. 72" x 72" B-Axis Rotation ................
                            • Diameter or width: 72"
                            • Length: 72"
                              Trumpf 5000 Watt TruLaser 5040 CNC Fiber Laser
                              $RFQ
                              Trumpf 5000 Watt TruLaser 5040 CNC Fiber Laser
                              Reference #43485 Trumpf 5000 Watt TruLaser 5040 CNC Fiber Laser FEATURES: Siemens 840D SL CNC Control TruDisk 5001 Resonator Automatic Nozzle Changer Automatic Pallet Shuttle System Dust Collector Riedel Chille
                              • Wattage: 5000W
                              • X axis travel: 160'
                                Trumpf 6000 Watt TruLaser 3030 CNC Fiber Laser
                                $RFQ
                                Trumpf 6000 Watt TruLaser 3030 CNC Fiber Laser
                                Reference #43487 Trumpf 6000 Watt TruLaser 3030 CNC Fiber Laser FEATURES: Siemens CNC Control Automatic Nozzle Changer TruDisk 6001 with BrightLine Fiber Automatic Pallet Changer Second Door Window Integrated
                                • Wattage: 6000W
                                • X axis travel: 120'
                                  Hem Model WF140HM-DC 20" x 44" Horizontal Straight Cut Band Saw
                                  $RFQ
                                  Hem Model WF140HM-DC 20" x 44" Horizontal Straight Cut Band Saw
                                  Reference #43486 Hem Model WF140HM-DC 20" x 44" Horizontal Straight Cut Band Saw FEATURES: Movable Pedestal Console Hydraulic Vises Hydraulic Head Lift Powered Guide Arm Hydraulic Blade Tension Coola
                                  Controlled Automation DRL-348TC 3-Spindle Beam Drill
                                  $RFQ
                                  Controlled Automation DRL-348TC 3-Spindle Beam Drill
                                  Reference #32361 Controlled Automation DRL-348TC 3-Spindle Beam Drill FEATURES: Controlled Automation CNC Control 3-Spindles With ATC, 2100 RPM Updated Yaskawa Spindle Drives (2015) CAPACITY: Maximum Materia
                                  Trumpf 3000 Watt TruLaser 5030 CNC Fiber Laser
                                  $RFQ
                                  Trumpf 3000 Watt TruLaser 5030 CNC Fiber Laser
                                  Reference #43420 Trumpf 3000 Watt TruLaser 5030 CNC Fiber Laser FEATURES: Siemens 840D SL CNC Control Automatic Pallet Shuttle System Laser TruDisk 3001 CAPACITIES: Laser Output ............................ 3
                                  • Wattage: 3000W
                                  • X axis travel: 120'
                                    Trumpf TruLaser 2030 3200 Watt CNC Laser
                                    $RFQ
                                    Trumpf TruLaser 2030 3200 Watt CNC Laser
                                    Reference #43484 Trumpf TruLaser 2030 3200 Watt CNC Laser FEATURES: Siemens SIMO 611 CNC Control TruCoax 3200 Watt Resonator Automatic Sheet Loader/Unload System CAPACITY: Laser Output ........................
                                    • Wattage: 3200W
                                    • X axis travel: 121'
                                      OKK HMC400 CNC 4-Axis Horizontal Machining Center
                                      $RFQ
                                      OKK HMC400 CNC 4-Axis Horizontal Machining Center
                                      Reference #32909 OKK HMC400 CNC 4-Axis Horizontal Machining Center FEATURES: Fanuc 31i-B CNC Control Full B-Axis Contouring 60-Station Automatic Tool Changer 15,000 RPM Thru-Spindle Coolant Renishaw OMP60 Prob
                                      • X axis: 22.05"
                                      • Y axis: 22.05"
                                        Engel e-insert 90 Rotary US
                                        $RFQ
                                        Engel e-insert 90 Rotary US
                                        Reference #43482 Engel e-insert 90 Rotary US CLAMPING UNIT: Clamp Force ....................... 90 US Tons Opening Force ..................... 8.6 US Tons Opening Stroke .................... 13.8" Mold Hei
                                        • Clamping force: 90T
                                          RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine
                                          $RFQ
                                          RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine
                                          Reference #43458 RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine SPECIFICATIONS: Maximum Sheet Thickness ............... 11 Ga. Maximum Bending Width ................. 157" Clamping Beam
                                          • Maximum thickness capacity: 11Ga
                                          • Bending length: 157"
                                            RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine
                                            $RFQ
                                            RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine
                                            Reference #43459 RAS 73.40 FLEXIbend 11 Ga. x 157" Hydraulic CNC Folding Machine SPECIFICATIONS: Maximum Sheet Thickness ............... 11 Ga. Maximum Bending Width ................. 157" Clamping Beam
                                            • Maximum thickness capacity: 11Ga
                                            • Bending length: 159"
                                              Swistek GT328DDY Swiss Type Automatic CNC Screw Machine
                                              $RFQ
                                              Swistek GT328DDY Swiss Type Automatic CNC Screw Machine
                                              Reference #43197 Swistek GT328DDY Swiss Type Automatic CNC Screw Machine FEATURES: Fanuc OiTF CNC Control 8-Position Turret Chip Conveyor 4-Position Side Tools 4-Position Face Tools CAPACITY: Maximum Swing O
                                              • Spindle hole diameter: 3.937"
                                                Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
                                                $RFQ
                                                Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
                                                Reference #43313 Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling
                                                • Swing: 78.74"
                                                  Brother TC-32BN QT CNC Vertical Machining Center, 23.6" x 16.7" t
                                                  $RFQ
                                                  Brother TC-32BN QT CNC Vertical Machining Center, 23.6" x 16.7" t
                                                  BROTHER CNC VERTICAL MACHINING CENTER Model TC-32BN QT, S/N 121993, New 2014 Stock # Q11838 EQUIPPED WITH: Brother B00 CNC Control, 16000 RPM Spindle, BT40 Spindle Taper, 26 Station Tool Changer, Through Spindle Co
                                                  • X axis: 21.7"
                                                  • Y axis: 15.7"
                                                    Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
                                                    $RFQ
                                                    Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill
                                                    Reference #43312 Giddings & Lewis VTC-1600 63" CNC Vertical Boring Mill FEATURES: Fanuc 160i-TB CNC Control 26-Station Automatic Tool Change 6-Wedge Lock & 20 Kennametal KM80 Station Misc. Tooling
                                                    • Swing: 78.74"
                                                      63" Schiess CNC Vertical Boring Mill with Milling
                                                      $RFQ
                                                      63" Schiess CNC Vertical Boring Mill with Milling
                                                      Reference #43101 63" Schiess CNC Vertical Boring Mill with Milling Features: Fanuc 15M CNC Control 63" 4-Jaw Chuck Ram With Live Milling Full C-Axis Table 40-Station Automatic Tool Changer Through S
                                                      • Swing: 78.73"
                                                        SHW UniSpeed/6 5-Axis CNC Universal Milling Machine
                                                        $RFQ
                                                        SHW UniSpeed/6 5-Axis CNC Universal Milling Machine
                                                        Reference #43462 SHW UniSpeed/6 5-Axis CNC Universal Milling Machine FEATURES: Siemens 840D Solution Line CNC Control 90 Station Automatic Tool Changer 2-Axis Orthogonal Milling Head B-Axis Rotary Table Th
                                                        • X axis travel: 118.11"
                                                          60" Summit Vertical Boring Mill
                                                          $RFQ
                                                          60" Summit Vertical Boring Mill
                                                          Reference #43460 60" Summit Vertical Boring Mill Features: Full Pendant Control Left Hand Vertical Swiveling Ram Right Hand Vertical 5-Position Turret 57" Diameter 4-Jaw Chuck Specifications:
                                                          Herkules 61" x 275" CNC Roll Lathe
                                                          $RFQ
                                                          Herkules 61" x 275" CNC Roll Lathe
                                                          Reference #32948 Herkules 61" x 275" CNC Roll Lathe FEATURES: 4-Position Heavy Duty Turret 250 HP Spindle Motor 60 Ton Weight Capacity SPECIFICATIONS: Maximum Turning Diameter .............. 61.0
                                                          • Swing: 61.02"
                                                          • Centers: 275.59"
                                                            42" x 504" Gisholt 5L Long Bed Manual Lathe
                                                            $RFQ
                                                            42" x 504" Gisholt 5L Long Bed Manual Lathe
                                                            Reference #43456 42" x 504" Gisholt 5L Long Bed Manual Lathe FEATURES: 31.5" 4-Jaw Chuck 4-Way Tool Post 75 HP DC Main Motor SPECIFICATION: Swing Over Bed ........................ 42"
                                                            • Swing: 42"
                                                            • Centers: 504"
                                                              42" x 504" Gisholt 5L Long Bed Manual Lathe
                                                              $RFQ
                                                              42" x 504" Gisholt 5L Long Bed Manual Lathe
                                                              Reference #43457 42" x 504" Gisholt 5L Long Bed Manual Lathe FEATURES: 31.5" 4-Jaw Chuck 4-Way Tool Post 75 HP Main Motor SPECIFICATION: Swing Over Bed ........................ 42" S
                                                              • Swing: 42"
                                                              • Centers: 504"
                                                                Kuraki KBH-12 CNC Boring Mill
                                                                $RFQ
                                                                Kuraki KBH-12 CNC Boring Mill
                                                                Reference #43438 Kuraki KBH-12 CNC Boring Mill FEATURES: Fanuc 16i-MB CNC Control 30-Station Automatics Tool Changer Full 4-Axis B-Axis Table Coolant Thru Spindle Full Chip & Splash Enclosure Chip Con
                                                                • Spindle diameter: 7.87"
                                                                • X axis travel: 59.05"
                                                                  1996 - 33 Ton Amada Vipros 345 CNC Turret Punch
                                                                  $RFQ
                                                                  1996 - 33 Ton Amada Vipros 345 CNC Turret Punch
                                                                  Capacity 33 Ton Max. Sheet Size 40" x 50" Max Punching Capacity 14" Max Hole Size 10 ga. - 3.5", 1/4" - 1.6" Turret Style Thick Turret Speed 30 RPM Dimensions (approx) 9 x 16 x 7'H
                                                                  • Tonnage: 33T
                                                                    2022 JCB 35Z-1 Compact Excavator w/ Bucket RTR# 4053873-01
                                                                    $31,000
                                                                    2022 JCB 35Z-1 Compact Excavator w/ Bucket RTR# 4053873-01
                                                                    Unit located in San Antonio, TX. 2022 JCB 35Z-1 Compact Excavator w/ Bucket & Blade, Perkins Diesel Engine, Hyd Transmission, Open Cab, 24 Hp, Hour Meter Reads: 163 (Unverified), S/N: JCB8EBA7HM3124414 All equipmen
                                                                    Cont Saw 10" 30" Fnc Rockwell
                                                                    $599
                                                                    Cont Saw 10" 30" Fnc Rockwell
                                                                    Cont Saw 10" 30" Fnc Rockwell Model: N/A [Rockwell] S/N: N/A Right Tilt w/30" T Fence 1-1/2Hp; 1Ph; 115/230Volt
                                                                    150 Ton Minster P2-150-54 Straight Side Punch Press
                                                                    $RFQ
                                                                    150 Ton Minster P2-150-54 Straight Side Punch Press
                                                                    Year: TBD Make: Minster Model: P2-150-54 Specifications: Tonnage: 150 Tons Stroke: 6" Strokes/Min: 45-90spm Bolster Area: 54" x 40" Shut Height on Bed Stroke: 23" Slide Adjust: 4"
                                                                    • Tonnage: 150T
                                                                      220 Ton Seyi SN2-220 C Frame Punch Press
                                                                      $RFQ
                                                                      220 Ton Seyi SN2-220 C Frame Punch Press
                                                                      Year: 1998 Make: Seyi Model: SN2-220 Specifications: Tonnage: 220 Tons Stroke: 9.1" Strokes/Min: 25-45spm Slide Area: 72.8 x 25.6" Bolster Area: 95.3 x 33.1" Die Height: 19.7" Slide Adj
                                                                      • Tonnage: 220T
                                                                        2000 - Amada Togu III CNC Tool Grinder
                                                                        $RFQ
                                                                        2000 - Amada Togu III CNC Tool Grinder
                                                                        Max Grinding .099" Max Tool Diameter 6.29" Main Axis Motor 2 HP Main Axis Rotation Speed 3000 RPM Main Axis Travel 9.45" Max Tool Height 5.9" Dimensions (approx) 33" x 34" x 76"H
                                                                        • Maximum workpiece diameter: 6.29"
                                                                          2000 - Amada Togu III CNC Tool Grinder
                                                                          $RFQ
                                                                          2000 - Amada Togu III CNC Tool Grinder
                                                                          Max Grinding .099" Max Tool Diameter 6.29" Main Axis Motor 2 HP Main Axis Rotation Speed 3000 RPM Main Axis Travel 9.45" Max Tool Height 5.9" Dimensions (approx) 33" x 34" x 76"H
                                                                          • Maximum workpiece diameter: 6.29"
                                                                            2021 SealMaster TR300 Asphalt Distributor RTR# 4043266-02
                                                                            $9,000
                                                                            2021 SealMaster TR300 Asphalt Distributor RTR# 4043266-02
                                                                            Unit located in Glasgow, KY. 2021 SealMaster TR300 S/A Trailer Mounted Heated Asphalt Distributor, Honda GX 160 Gas Engine, 300 Gallon Capacity, Electric Brakes with Safety Break-Away System, 5-Gallon Diesel Wash Down S
                                                                            Mori Seiki NT4300DCS/1000 CNC Milling & Turning Center
                                                                            $RFQ
                                                                            Mori Seiki NT4300DCS/1000 CNC Milling & Turning Center
                                                                            Reference #43453 Mori Seiki NT4300DCS/1000 CNC Milling & Turning Center FEATURES: Mori Seiki F31iA5 CNC Control Milling Spindle 100 Station Automatic Tool Changer High Pressure Coolant System SPECIFICATIO
                                                                            • Swing: 25.9"
                                                                            • Centers: 41.2"
                                                                              Bourn & Koch HDS1600-300 CNC Herringbone Gear Shaper
                                                                              $RFQ
                                                                              Bourn & Koch HDS1600-300 CNC Herringbone Gear Shaper
                                                                              Reference #43475 Bourn & Koch HDS1600-300 CNC Herringbone Gear Shaper FEATURES: Siemens 9-Axis CNC Control Inch/Metric Operation Chip Conveyor CNC Crowning and Taper For External Gears Mist Collector CAPA
                                                                              • Maximum gear diameter: 62.92"
                                                                                Markforged X7 3D Printer
                                                                                $RFQ
                                                                                Markforged X7 3D Printer
                                                                                Reference #43490 Markforged X7 3D Printer FEATURES: CFR Printing Process Plastics & Fibers In-Process Laser Inspection Active Print Calibration CAPACITIES: Build Volume, Width ................... 22.99&qu
                                                                                Summit 50 51" x 464" Manual Lathe with Taper Attachment
                                                                                $RFQ
                                                                                Summit 50 51" x 464" Manual Lathe with Taper Attachment
                                                                                Reference #43237 Summit 50 51" x 464" Manual Lathe with Taper Attachment FEATURES: 59" 4-Jaw Chuck 39" 4-Jaw Chuck Taper Attachment Hardened Ways Inch/Metric Threading Power Compound 27&q
                                                                                • Swing: 51"
                                                                                • Centers: 464"
                                                                                  Liberty D7-F75 High Pressure Air System
                                                                                  $RFQ
                                                                                  Liberty D7-F75 High Pressure Air System
                                                                                  Reference #43090 Liberty D7-F75 High Pressure Air System CAPACITY: Air Compressor Horsepower ............. 25 HP Booster ............................... 20 HP Flow scfh ............................. 4500 scfh Max
                                                                                  • Motor: 25HP
                                                                                    Peddinghaus AFPS 623L 6" x 6" x 1/2" CNC Anglemaster Punch &
                                                                                    $RFQ
                                                                                    Peddinghaus AFPS 623L 6" x 6" x 1/2" CNC Anglemaster Punch &
                                                                                    Reference #43494 Peddinghaus AFPS 623L 6" x 6" x 1/2" CNC Anglemaster Punch & Shear Line FEATURES: 250 Ton Single Cut Shear Pinch Drive Feed, Pulls Material Through Machine In-Feed Roller Conve
                                                                                    Okuma LB15II-M CNC Lathe, OSP7000L, Collet Chuck, 20" Swing, 20.47&
                                                                                    $RFQ
                                                                                    Okuma LB15II-M CNC Lathe, OSP7000L, Collet Chuck, 20" Swing, 20.47&
                                                                                    OKUMA LB15II-M CNC TURNING CENTER Model LB15II-M, S/N 2543, New 1995 Stock # Q11839 EQUIPPED WITH: Okuma OSP7000L CNC Control, Collet Chuck, 12-Position Turret with Live Tooling, 2.12" Bar Capacity, 12' LN
                                                                                    • Swing: 20"
                                                                                    • Centers: 20.47"
                                                                                      Mitts & Merrill K-3530 3.5" Hydraulic Keyseater
                                                                                      $RFQ
                                                                                      Mitts & Merrill K-3530 3.5" Hydraulic Keyseater
                                                                                      Reference #43359 Mitts & Merrill K-3530 3.5" Hydraulic Keyseater FEATURES: Microprocessor Controls T-Slotted Table Hydraulic Chip Sprout Pressure Dull Tool Detection Inch/Metric Conversion Capability H
                                                                                      • Keyway width: 3.5"
                                                                                        Schiess 3VKE 500/900 197"/355" CNC Openside Vertical Boring Mill
                                                                                        $RFQ
                                                                                        Schiess 3VKE 500/900 197"/355" CNC Openside Vertical Boring Mill
                                                                                        Reference #25414 Schiess 3VKE 500/900 197"/355" CNC Openside Vertical Boring Mill with Milling FEATURES: Fanuc 18-T CNC Control (Retrofit 1997) Openside Design With Sliding Column 90.55" Ram Strok
                                                                                        • Swing: 354.33"
                                                                                          Voortman V808 Robotic Structural Plasma Coping System W/ 4-Side Processing
                                                                                          $RFQ
                                                                                          Voortman V808 Robotic Structural Plasma Coping System W/ 4-Side Processing
                                                                                          Reference #43504 Voortman V808 Robotic Structural Plasma Coping System With 4-Side Processing FEATURES: Voortman CNC Control 8-Axis Robot For 4-Sided Cutting Hypertherm HPR260XD Plasma Cutting Unit Infeed Transfe
                                                                                          Mazak VTC-250D/50 CNC Vertical Machining Center, Mazatrol PC Fusion 640MN
                                                                                          $RFQ
                                                                                          Mazak VTC-250D/50 CNC Vertical Machining Center, Mazatrol PC Fusion 640MN
                                                                                          MAZAK CNC VERTICAL MACHINING CENTER Model VTC-250D/50, New 2006 Stock # Q11926 EQUIPPED WITH: Mazatrol PC Fusion 640MN CNC Control, Manual Pulse Generator – Detachable, Coolant Thru Spindle -79PSI 136 w/ Top Cover
                                                                                          • X axis: 69.3"
                                                                                          • Y axis: 25.09"
                                                                                            2013 - Haas VM-3 Mold Maker CNC Vertical Machining Center
                                                                                            $RFQ
                                                                                            2013 - Haas VM-3 Mold Maker CNC Vertical Machining Center
                                                                                            X-Axis 40" Y-Axis 26" Z-Axis 25" Table Size 54" x 25" Spindle Speeds 12,000 RPM Spindle Taper CT 40 Spindle Motor 30 HP Tool Changer 40 Dimensions (approx) 156 x 102 x 117"H Weight
                                                                                            • X axis: 40"
                                                                                            • Y axis: 26"
                                                                                              2010 - 150 Ton x 12' Accurpress Accell Fully Automated Bending Cell
                                                                                              $RFQ
                                                                                              2010 - 150 Ton x 12' Accurpress Accell Fully Automated Bending Cell
                                                                                              Capacity 150 Tons Length of Bed 144" Distance between end frames 124" Bed Height from Floor 34" Stroke length 14" Throat Depth 16" Open Height 22" Closed height 8" Fast Approach
                                                                                              • Tonnage: 150T
                                                                                                2016 - 4,000 Watt Cincinnati CL-940 Fiber Laser
                                                                                                $RFQ
                                                                                                2016 - 4,000 Watt Cincinnati CL-940 Fiber Laser
                                                                                                Resonator Wattage 4,000 Max Sheet Size 5' x 10' Max Thickness Steel -3/4", Stainless Steel - 1/2", Aluminum - 1/4" Table Load Capacity 1875 lbs X Axis Travel 122" Y Axis Travel 61"
                                                                                                • Wattage: 4000W
                                                                                                • X axis travel: 10'
                                                                                                  30 Ton Strippit 30/30 Single Station Punch
                                                                                                  $RFQ
                                                                                                  30 Ton Strippit 30/30 Single Station Punch
                                                                                                  Capacity 30 Ton Punching Capacity (mild steel) 1" Dia Thru 1/4" Sheet Size 30"x30" Throat Depth 33" Work Table Area 72"x48" Stroke 5/8" Shut Height 5-15/32" Vertical Wo
                                                                                                  • Tonnage: 30T
                                                                                                    2023 ASV RT-40 Compact Track Loader RTR# 4053649-01
                                                                                                    $32,000
                                                                                                    2023 ASV RT-40 Compact Track Loader RTR# 4053649-01
                                                                                                    Unit located in Mulberry, FL. 2023 ASV RT-40 Compact Track Loader w/Bucket, Yanmar 3TNV86CT 3-cylinder Turbocharged Diesel Engine, Hyd Transmission, Open Cab, Rear View Camera, Hour Meter Reads: 14 (Unverified), S/N: AS
                                                                                                    2021 Cat 299D3 XE Track Loader RTR# 4053684-01
                                                                                                    $44,000
                                                                                                    2021 Cat 299D3 XE Track Loader RTR# 4053684-01
                                                                                                    Equipment located in Garden City, GA. 2021 Cat 299D3 XE Track Loader, Cat C3.8 DITl Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, Rear View Camera, Hour Meter Reads: 1,979 (Unverified), S/N: B
                                                                                                    Mazak FH-10800 CNC Horizontal Machining Cntr, Mazatrol Fusion 640M Control
                                                                                                    $RFQ
                                                                                                    Mazak FH-10800 CNC Horizontal Machining Cntr, Mazatrol Fusion 640M Control
                                                                                                    MAZAK CNC HORIZONTAL MACHINING CENTER Model FH-10800, New 2008 Stock # Q11924 EQUIPPED WITH: Mazatrol Fusion 640M CNC Control, EIA/ISO and Conversational Programming, (2) 39.3" Square Pallets with 1° Inde
                                                                                                    • X axis: 66.9"
                                                                                                    • Y axis: 55.1"
                                                                                                      Forestry Excavator Attachment Pkg w/ 2 Attach. RTR# 4053902-01
                                                                                                      $16,000
                                                                                                      Forestry Excavator Attachment Pkg w/ 2 Attach. RTR# 4053902-01
                                                                                                      Unit located in Garden City, GA Forestry Excavator Attachment Package To Include: (1) 2022 Prinoth M450E-1090 Mulching Attachment w/ Coupler S/N: 10526545, (1) OEMF BI-300 Tree Shear Attachment w/ Coupler; S/N: 2024372
                                                                                                      2023 ASV RT135F Track Loader w/ Bucket RTR# 4053394-01
                                                                                                      $80,000
                                                                                                      2023 ASV RT135F Track Loader w/ Bucket RTR# 4053394-01
                                                                                                      Unit located in Katy, TX. 2023 ASV RT135F Track Loader w/ Bucket, Cummins 3.8 L Turbocharged Diesel Engine, Hyd Transmission, Enclosed Cab, Air Ride Seat, A/C, Heater, AM/FM Radio, Hour Meter Reads: 114 (Unverified), S/
                                                                                                      2.5 TONS PER HOUR ALUMINUM WIRE ROD PRODUCTION LINE (14352)
                                                                                                      $RFQ
                                                                                                      2.5 TONS PER HOUR ALUMINUM WIRE ROD PRODUCTION LINE (14352)
                                                                                                      Capacity 9.5 millimeters Used Aluminum Wire Rod Production LineStock # 143521. Overall&
                                                                                                      72" X 0.500" BUTECH LEVELER (14347)
                                                                                                      $RFQ
                                                                                                      72" X 0.500" BUTECH LEVELER (14347)
                                                                                                      Max Width of Workpiece 72 inches Max Thickness of Workpiece
                                                                                                      2050mm (80") x 20mm (.780") Fagor 4-HI Backed up Flattener (14346)
                                                                                                      $RFQ
                                                                                                      2050mm (80") x 20mm (.780") Fagor 4-HI Backed up Flattener (14346)
                                                                                                      Max Width of Workpiece 80 inches Max Thickness of Workpiece
                                                                                                      18" X 26" WATERBURY FARREL 2 HI HOT/COLD ROLLING MILL FOR FLAT SHEET OR BARS (14
                                                                                                      $RFQ
                                                                                                      18" X 26" WATERBURY FARREL 2 HI HOT/COLD ROLLING MILL FOR FLAT SHEET OR BARS (14
                                                                                                      MANUFACTURER: WATERBURY FARREL CORPORATION (USA)Stock # 14344TYPE: 2 HI REVERSING ROLLING MILL FOR FLAT SHEET OR ROD/BARROLL SIZE: 18" (457MM) DIAMETER X 26" (660MM) WIDTHDRIVE MOTOR: 300 HP, 600/1500 RPM, 1000 AMPS, 250
                                                                                                      62" X 0.108" VOSS PRECISION LEVELER (STK# 14343)
                                                                                                      $RFQ
                                                                                                      62" X 0.108" VOSS PRECISION LEVELER (STK# 14343)
                                                                                                      Max Width of Workpiece 62 inches Max Thickness of Workpiece
                                                                                                      66" X 0.060" HERR VOSS PRECISION 5 HI LEVELER ( Stk# 14342)
                                                                                                      $RFQ
                                                                                                      66" X 0.060" HERR VOSS PRECISION 5 HI LEVELER ( Stk# 14342)
                                                                                                      Max Width of Workpiece 66 inches Max Thickness of Workpiece
                                                                                                      24" X 0.050" MACHINE CONCEPTS 21 ROLL PRECISION LEVELER (Stk # 14341)
                                                                                                      $RFQ
                                                                                                      24" X 0.050" MACHINE CONCEPTS 21 ROLL PRECISION LEVELER (Stk # 14341)
                                                                                                      24" X 0.050" MACHINE CONCEPTS 21 ROLL PRECISION LEVELERStock # 14341&nbsp;Specifications:SERIAL .................... 07-063-ZYEAR ...................... 2007NUMBER OF ROLLS ........... 21MATERIAL WIDTH ............ 4
                                                                                                      24" METAL EMBOSSING ROLLS (14340)
                                                                                                      $RFQ
                                                                                                      24" METAL EMBOSSING ROLLS (14340)
                                                                                                      24" METAL EMBOSSING MACHINEStock # 14340Specifications:WIDTH OF ROLLS ................. 24"DIAMETER OF ROLLS .............. 12"ADJUSTMENT ..................... 2-1/2"AIR CLUTCH ..................... YESVARIABLE SPEED MOT
                                                                                                      50" BRADBURY-PUMA STUCCO DESIGN 2 STAND EMBOSSING MACHINE (14339)
                                                                                                      $RFQ
                                                                                                      50" BRADBURY-PUMA STUCCO DESIGN 2 STAND EMBOSSING MACHINE (14339)
                                                                                                      50" Bradbury-Puma 2 Stand Embossing MachineStock #14339Specifications:YEAR NEW&nbsp; .................... 2013NUMBER OF ROLL SETS .......... 2 (4 TOTAL)ROLL WIDTH ................... 53"WORKING WIDTH ................
                                                                                                      BRADBURY 50" STUCCO DESIGN SINGLE STAND EMBOSSER (14338)
                                                                                                      $RFQ
                                                                                                      BRADBURY 50" STUCCO DESIGN SINGLE STAND EMBOSSER (14338)
                                                                                                      50" Bradbury- Puma Embossing MachineStock # 14338Specifications:YEAR NEW&nbsp; ................... 2013MODEL ....................... 50" X 20"ROLL WIDTH .................. 53"WORKING WIDTH ............... 50"TOP &
                                                                                                      UNGERER 550mm (22") STRETCH/TENSION LEVELING LINE (14337)
                                                                                                      $RFQ
                                                                                                      UNGERER 550mm (22") STRETCH/TENSION LEVELING LINE (14337)
                                                                                                      550mm UNGERER STRETCH/TENSION LEVELERStock # 14337Materials&nbsp; : Stainless steel Copper ,Copper alloy and mild steel Maker: UngererBuilt&nbsp; : 1984Revamped:2013Last modification :2013 All electricals were re
                                                                                                      24" X .093" CWP SERVO FEEDER
                                                                                                      $RFQ
                                                                                                      24" X .093" CWP SERVO FEEDER
                                                                                                      ORDER 24 24" MAX WIDTH&nbsp;.020" - .093" THICKNESS CAPACITY0 - 999.99 FEED LENGHT
                                                                                                      ERLO GEARD HEAD DRILL PRESS
                                                                                                      $RFQ
                                                                                                      ERLO GEARD HEAD DRILL PRESS
                                                                                                      MODEL: TCA-32 &nbsp; SERIAL NO.: 1463/246 &nbsp; Maximum Drilling Diameter 1-1/4&Prime; steel&nbsp; &nbsp; Maximum Travel of Spindle 7.87&Prime; &nbsp; Taper of Spindle Hole Morse # 4 &nbs
                                                                                                      NIDER GEARED HEAD DRILL PRESS
                                                                                                      $RFQ
                                                                                                      NIDER GEARED HEAD DRILL PRESS
                                                                                                      MODEL: N1-50B &nbsp; SERIAL NO.: N/A &nbsp; Maximum Drilling Diameter 2 STEEL &nbsp; Maximum Travel of Spindle 5 1/4&Prime; &nbsp; Taper of Spindle Hole Morse # 4 &nbsp; &nbsp; &nbsp; Dis
                                                                                                      Mori Seiki MT-4000B/2000 CNC Milling & Turning Center
                                                                                                      $RFQ
                                                                                                      Mori Seiki MT-4000B/2000 CNC Milling & Turning Center
                                                                                                      Reference #43452 Mori Seiki MT-4000B/2000 CNC Milling & Turning Center FEATURES: Mori Seiki MSG-501 CNC Control 23.5" 3-Jaw Chuck B-Axis Swivelling Milling Spindle C-Axis Contouring Main Spindle 120-
                                                                                                      • Swing: 37"
                                                                                                      • Centers: 103.1"
                                                                                                        144" Giddings & Lewis Vertical Boring Mill
                                                                                                        $RFQ
                                                                                                        144" Giddings & Lewis Vertical Boring Mill
                                                                                                        Reference #43437 144" Giddings & Lewis Vertical Boring Mill FEATURES: Acu-Rite 300Sc 4xT Digital Readout 2-Swivelling Rams Side Head SPECIFICATIONS: Table Diameter ........................ 144"
                                                                                                        • Swing: 150"
                                                                                                          2005 Link-Belt 240 LX Excavator RTR# 4011543-01
                                                                                                          $13,000
                                                                                                          2005 Link-Belt 240 LX Excavator RTR# 4011543-01
                                                                                                          Unit located in Salem, OR. 2005 Link-Belt 240 LX Excavator W/ Stroke Delimber, Isuzu BB-6BG1T Diesel Engine, Hyd Transmission, Enclosed Cab, Air Conditioner, Hour Meter Reads: 27,847 (Unverified), S/N: 240Q3-1217 All e
                                                                                                          2021 Laguna Smartshop 2 CNC Router, 5' x 10' RTR# 4043911-01
                                                                                                          $18,500
                                                                                                          2021 Laguna Smartshop 2 CNC Router, 5' x 10' RTR# 4043911-01
                                                                                                          Unit located in San Antonio, TX. 2021 Laguna Smartshop 2 CNC Router, 5' x 10' Cutting Area, 12HP HSD Spindle, 8 Position Tool Changer, Model: SS2-2-510, 3PH/ 220v/60 Hz, S/N: 21081670909 All equipment is sold “
                                                                                                          HWACHEON VESTA 1000 CNC VERTICAL MACHINING CENTER NEW: 2018 | MM
                                                                                                          $RFQ
                                                                                                          HWACHEON VESTA 1000 CNC VERTICAL MACHINING CENTER NEW: 2018 | MM
                                                                                                          SPECIFICATIONS: TRAVELS: -X AXIS: 39.37" -Y AXIS: 21.65" -Z AXIS: 19.69" POWER: 25 HP RPM: 12,000 RPM # ATC: 30 TAPER: CAT-40 TABLE-W: 19.76" TABLE-L: 43.31" # AXIS: 3 DIMENSIONS: 112
                                                                                                          • X axis: 39.37"
                                                                                                          • Y axis: 21.65"
                                                                                                            2013 John Deere 320D Skid Steer w/ Bucket RTR# 3093637-01
                                                                                                            $12,500
                                                                                                            2013 John Deere 320D Skid Steer w/ Bucket RTR# 3093637-01
                                                                                                            Unit located in Dansville, NY. 2013 John Deere 320D Skid Steer w/ Bucket, E4024HT Diesel Engine, Hydraulic Transmission, Power Steering, 68 Hp, Hour Meter Reads: 4,894 (Unverified), S/N: 1T0320DBPDG24910 All equipment
                                                                                                            MAZAK VARIAXIS 7305II CNC VERTICAL MACHINING CENTER NEW: 2011 | JS 85985
                                                                                                            $RFQ
                                                                                                            MAZAK VARIAXIS 7305II CNC VERTICAL MACHINING CENTER NEW: 2011 | JS 85985
                                                                                                            SPECS: TRAVELS: X-AXIS (SPINDLE HEAD LEFT/RIGHT)… 28.74" Y-AXIS (SPINDLE HEAD BACK/FORTH)… 33.46" Z-AXIS (SPINDLE HEAD UP/DOWN)… 22.05" A-AXIS (TABLE TILT)… +30 TO – 120 DEGREES C-AXIS (TABLE ROTATIO
                                                                                                            • X axis: 28.74"
                                                                                                            • Y axis: 33.46"
                                                                                                              Kuraki KBT-13A 5.12" CNC Table Type Horizontal Boring Mill
                                                                                                              $RFQ
                                                                                                              Kuraki KBT-13A 5.12" CNC Table Type Horizontal Boring Mill
                                                                                                              Reference #43444 Kuraki KBT-13A 5.12" CNC Table Type Horizontal Boring Mill FEATURES: Fanuc 31i-A5 CNC Control 60-Station Automatic Tool Changer Built In B-Axis Rotary Table Renishaw OMP60 Part Probe Rigid
                                                                                                              • Spindle diameter: 5.12"
                                                                                                              • X axis travel: 118.11"
                                                                                                                SNK RB-5M 5-Face Double Column CNC Bridge Mill
                                                                                                                $RFQ
                                                                                                                SNK RB-5M 5-Face Double Column CNC Bridge Mill
                                                                                                                Reference #43445 SNK RB-5M 5-Face Double Column CNC Bridge Mill FEATURES: Fanuc 31i-B 4-Axis CNC Control 60-Station Automatic Tool Changer Automatic Attachment Changer 1-Degree Auto Indexing Right Angle Head Hi
                                                                                                                OKK HM-800S 4-Axis Horizontal Machining Center
                                                                                                                $RFQ
                                                                                                                OKK HM-800S 4-Axis Horizontal Machining Center
                                                                                                                Reference #43446 OKK HM-800S 4-Axis Horizontal Machining Center FEATURES: Fanuc 310iS-A5 4-Axis CNC Control Full B-Axis Contouring 31.5" x 31.5" Pallets 60-Station Automatic Tool Changer 12,000 RPM Spi
                                                                                                                • X axis: 42.3"
                                                                                                                • Y axis: 35.4"
                                                                                                                  Mazak Integrex 200-IV-ST Multi Axis CNC Turning & Milling Center
                                                                                                                  $RFQ
                                                                                                                  Mazak Integrex 200-IV-ST Multi Axis CNC Turning & Milling Center
                                                                                                                  Reference #43447 Mazak Integrex 200-IV-ST Multi Axis CNC Turning & Milling Center FEATURES: Mazatrol Matrix CNC Control Main Spindle & Second Spindle B-Axis Milling Spindle 9-Station Lower Turret 40-Posi
                                                                                                                  • Swing: 26"
                                                                                                                    DOOSAN DT360/40 CNC VERTICAL MACHINING CENTER APC NEW: 2014 | AG 82278
                                                                                                                    $RFQ
                                                                                                                    DOOSAN DT360/40 CNC VERTICAL MACHINING CENTER APC NEW: 2014 | AG 82278
                                                                                                                    SPECS: TRAVELS: -X AXIS: 20.5" -Y AXIS: 14.2" -Z AXIS: 13.8" TABLE PALLET SIZE: 25.6" x 14.8" SPINDLE SPEED: 12,000 RPM TAPER: CAT 40 BIG PLUS SPINDLE HORSEPOWER: 10 HP ATC CAPACITY: 1
                                                                                                                    • X axis: 20.5"
                                                                                                                    • Y axis: 14.2"
                                                                                                                      3" RLM Rollformer Gearboxes and Outboard Stands
                                                                                                                      $RFQ
                                                                                                                      3" RLM Rollformer Gearboxes and Outboard Stands
                                                                                                                      UTUBE NUMBER: 4071 MANUFACTURER: RLM SPECIFICATIONS: Number of Stands: 60+ Number of Gearboxes: 60+ Spindle Diameter: 3" with 1/2" shaft key Spindle Length: 25"- 30" Roll Space: (55) Gearbox
                                                                                                                      • # Stands: #60
                                                                                                                      • Roll diameter: 3"
                                                                                                                        Categories:
                                                                                                                        Condition:
                                                                                                                        Manufacturer:
                                                                                                                        Location:
                                                                                                                        Price:
                                                                                                                        •  to 
                                                                                                                        <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>