buy & sell, new & used machinery, machine tools & equipment

Woodworking Equipment

Woodworking Equipment For Sale

691 new & used woodworking equipment items for sale
<Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>
Refine: Viewing 561 - 580 of 691 matches
Sort by:
Items Per Page:  20  |  50 |  100
WILLIAMS & WHITE PRESS 250 TON GAP FRAME
$RFQ
WILLIAMS & WHITE PRESS 250 TON GAP FRAME
Category Presses – C – Gap Frame, Hydraulic Manufacturer Williams & White Model 250C Serial Number C-4421 Year 1982 Capacity 250 / 300 Ton Maximum 2500 / 3000 kN Maximum Speed 0 - 25 in/min (635 mm/min) Full Pr
TORIT #90 DUST COLLECTOR (CABINET FABRIC FILTER TYPE)
$RFQ
TORIT #90 DUST COLLECTOR (CABINET FABRIC FILTER TYPE)
TORIT #90 DUST COLLECTOR (CABINET FABRIC FILTER TYPE) RACO Stock Number R015519 CLEAN AIR FLOW ( CFM ) -------------------- 1215 TO 1535 FILTER CLOTH AREA ------------------------- 250 SQ. FT. DUST STORAGE CAPACIT
  • Motor: 3HP
    Cope & Stick Shaper
    $175
    Cope & Stick Shaper
    Cherokee Tool Co. Cope & Stick Shaper; Cutter Set; Ogee Style; 3-3/8" Diameter; 1-1/4" H; 3/4" Bore; Model 154-1 & 154-2
    Beading Shaper Cutter
    $50
    Beading Shaper Cutter
    Beading Shaper Cutter; 3-5/8" Diameter; 1/4" R; 1" H; 3/4" Bore; Model 321812
    Door Edge Finger Pull Shaper Cutter
    $60
    Door Edge Finger Pull Shaper Cutter
    Door Edge Finger Pull Shaper Cutter; 4-1/2" Diameter x 1-1/4" H x 1-1/4 - 1 Bore
    Beading & Slot Cutter Set (4pc) for Table Saw
    $99
    Beading & Slot Cutter Set (4pc) for Table Saw
    LRH Beading & Slot Cutter Set (4pc) for Table Saw; 5" Diameter; 4 Wing w/5/8" Bore; Model-Beading J106718; Model-Slot J49914
    12" Saw Blade
    $79
    12" Saw Blade
    Saw Blades (3 Each); $79.00 (Each); Various Tooth Count; 12"; 30mm Bore; Newly Sharpened
    Miter Gauge for Delta Shaper
    $149
    Miter Gauge for Delta Shaper
    Delta Miter Gauge for Delta 43-791 Shaper
    10" x 14" Marvel Fully Automatic Tilting Band Saw
    $8,950
    10" x 14" Marvel Fully Automatic Tilting Band Saw
    Machine Specs: Capacity Round 10" Rectangle 10" x 14" Blade Size 144" x 1" x .035 Blade Speeds
    18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
    $9,950
    18" x 20" Marvel Fully Automatic Tilt Frame Band Saw
    Machine Specs: Capacity 18" x 20" Capacity at 45 18" x 12-1/2" Table Size 30" x 33" Blade Length 14'-6" Blade Width
    24” Grob Variable Speed Vertical Band Saw with Air Feed Table
    $2,650
    24” Grob Variable Speed Vertical Band Saw with Air Feed Table
    Machine Specs: Throat 24” Max Height 12” Table Size 24” x 28” Table Tilts 5 & 45 Degrees Blade Speeds 40 - 5000 RPM Blade Size 1/8 to 1” Wide by 179” Long Main HP 3 HP Weight 1670 LBS Equipped With: Welder
    16” Doall Vertical Band Saw,With Extra Height,
    $3,250
    16” Doall Vertical Band Saw,With Extra Height,
    Machine Specs: Throat 16” Cutting Height 12” ( Catalogue Spec) 14” Actual Table 24” x 24” Table Tilts Left/Right 45/10 Blade Size 1/16” - 1” Speeds 2 Ranges 50 - 300 FPM 860 - 5200 FPM Motor 1-1/2 HP 220/440 Volt
    1200 LBS Cooper Weymouth Double End Coil Reel
    $950
    1200 LBS Cooper Weymouth Double End Coil Reel
    600 LBS Capacity Each Side 10” Max Width 48” Max Dia of of Coil 10” Min Id 20” Max. Id 6 Keepers Good Condition Inspect in Our Lebanon NJ Warehouse
    20” Vectrax Variable Speed Drill Press with Power Down Feed
    $1,750
    20” Vectrax Variable Speed Drill Press with Power Down Feed
    Machine Specs: Column 4” Dia Table 16” x 18” Working 19” x 22” Overall Speeds 150 - 1000 RPM 300 - 2000 RPM HP 1.5/.75 HP 220 Volt 3 Phase Quill Travel 5” Feeds .006, .004 and .008 Spindle Taper 3MT Equipped Wi
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013
    $2,200
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013
    Stone 18” Abrasive Cut Off Saw, Model M75, SN:0013 Specifications: 18“ wheel Blade Speed: 2500 RPM Volts: 220/440, Cycle: 60, PH3 AMPS: 25/13 HP: 7.5 Max Condition: Machine can be demonstrated under p
    used SCMI edgebander
    $5,000
    used SCMI edgebander
    SCMI Edgebander runs great glue pot wood strips and coil .buyer must facilitate flatbed fright.
    Kundig 43" belt sander
    $13,250
    Kundig 43" belt sander
    Located in Estes Park Colorado in a small woodworking shop. Well taking care of and extra belts comes with it. Call for details
    OTC HYDRAULIC PRESS
    $650
    OTC HYDRAULIC PRESS
    ALL AMERICAN WEIGHT LIFTERS OTC MODEL 5220 20 TON CAPACITY MINIMUM HEIGHT 10 3/4 MAXIMUM HEIGHT 20 1/2
    CENTRAL HYDRAULIC BOTTLE JACK
    $650
    CENTRAL HYDRAULIC BOTTLE JACK
    CENTRAL HYDRAULIC BOTTLE JACK PRESS 20 TON CAPACITY SERIAL#01051 083
    5' X 10' HOLZ-HER COSMEC CONQUEST 510 CNC ROUTER
    $RFQ
    5' X 10' HOLZ-HER COSMEC CONQUEST 510 CNC ROUTER
    General Specifications X-Axis travel 3190mm/125.6" Y-Axis travel 2010mm/79.1" Z-Axis travel 280mm/11.0" Table size 3100mm x 1600mm (122.0" x 63.0") Z-Axis clearance under rail 250mm/9.84&qu
    Categories:
    Condition:
    Manufacturer:
    Location:
    Price:
    •  to 
    <Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>