buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 1 - 20 of 21164 matches
Sort by:
Items Per Page:  20  |  50 |  100
16-36 Barber Colman Universal Gear Hobber
$RFQ
16-36 Barber Colman Universal Gear Hobber
SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
No. 16-36 Barber-Colman Universal Gear Hobber
$RFQ
No. 16-36 Barber-Colman Universal Gear Hobber
SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
$72,000
2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
Unit located in Stoney Creek, VA. 2015 John Deere 824K Wheel Loader w/Bucket, PowerTech PSX 6135 Diesel Engine, Powershift Transmission, Enclosed Cab, Power Steering, Brakes, Air Ride Seat, A/C, Heater, Hour Meter Reads
2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
$65,000
2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
Unit located in St. Cloud, MN. 2022 Wacker Neuson ET65 Compact Excavator w/ Bucket & Blade, Perkins 404F-22T Diesel Engine, Hyd Transmisson, Enclosed Cab, Hyd Thumb, A/C, Heater, AM/FM Radio, Hour Meter Reads: 151 (
2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
$57,000
2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
Unit located in Thomaston, GA. 2012 Vermeer D9x13 Series II Directional Drill w/ DikgiTrak Locating System, Track Mounted, Kubota Diesel Engine, Rubber Tracks, Rods, Hour Meter Reads: 4,761 (Unverified), 2021 Straight-l
Haas VF-2SS Machining Center
$61,500
Haas VF-2SS Machining Center
Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 30 RPM: 12,000RPM Controller: Haas Year: 2017 Voltage / Phase: 220 / 3 Weight: 8,3
Fadal VMC15 Machining Center
$19,000
Fadal VMC15 Machining Center
Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
428020515002
$399
428020515002
428-02-051-5002 worm drive gear, new, custom made for Rockwell 18" Planer
2011 Moffett M55 Piggyback Forklift RTR#4123591-01
$19,500
2011 Moffett M55 Piggyback Forklift RTR#4123591-01
Equipment located in Thomaston, GA. 2011 Moffett M55 Piggyback Forklift, 10' Mast, Kubota Diesel Engine, Hydrostatic Transmission, Power Steering, Power Brakes, 2WD, Pneumatic Tires, 48" Fork Length, Front Sta
2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
$65,000
2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
Equipment located in Raleigh, NC. 2017 Intermac Master 38.8 CNC Stone Router, S/N: 1000016281, With Z-Laser LP-HFD2, S/N: 1700008926 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. C
2018 Bradbury Sheet Slitter
$8,000
2018 Bradbury Sheet Slitter
Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)
Legacy Mill 8'
$750
Legacy Mill 8'
Legacy Mill 8' Model: 1500 EX [LegacyWoodworking Machinery] S/N: N/A
Lathe 24" VS 3hp 24x48 Vcmrc
$3,900
Lathe 24" VS 3hp 24x48 Vcmrc
Lathe 24" VS 3hp 24x48 Vcmrc Model: VL300 [Vicmarc] SN: 149 Variable Speed 24-48 Lathe w/4 Chucks; 9 Face Plates; 5 Tool Rests; 2 Extra Tool Rest Banjos 3Hp; 1Ph; 220Volt
8' x 3/8" Americor Double Pinch Plate Bending Roll
$RFQ
8' x 3/8" Americor Double Pinch Plate Bending Roll
. We are pleased to offer for your consideration: (1) 3/8" x 8' Americor Double Pinch Plate Bending Roll Stock Number: 13985 List Price: On Request Manufacturer: Americor Model Number: 4RDP 250/8 S
  • Roll length: 100"
  • Thickness: 0.375"
    Fadal VMC15XT Machining Center
    $19,500
    Fadal VMC15XT Machining Center
    Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
    2017 Komatsu PC360LC-11 Crawler Excavator RTR#4122244-01
    $65,000
    2017 Komatsu PC360LC-11 Crawler Excavator RTR#4122244-01
    Unit located in Riverside, CA. 2017 Komatsu PC360LC-11 Crawler Mounted Excavator w/ Bucket, Komatsu Diesel Engine, Automatic Transmission, Enclosed Cab, Heater, Air Conditioner, Hour Meter Reads: 5,948.8 (Unverified), S
    Haas SMINIMILL2 Machining Center
    $34,000
    Haas SMINIMILL2 Machining Center
    Table: 12" x 36" Spindle: CAT 40 x-Axis Travel: 16" y-Axis Travel: 14" z-Axis Travel: 15" Tool Turret: 30 RPM: 10,000RPM Controller: Haas Year: 2018 Voltage / Phase: 220 / 3 Weight: 4,6
    Ewag WS-11 Universal Tool Grinder
    $RFQ
    Ewag WS-11 Universal Tool Grinder
    SPECIFICATIONS: X-axis Travel 100 mm Y-axis Travel 100 mm Z-axis Travel 100 mm A-axis Rotation -135° to +30° B-axis Movement Infinite Grinding Spindle 0.3 kW Grinding Spindle Speed 2500-8000 RPM Max Gri
    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
    $RFQ
    SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
    WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Spindle RPM – Variable: 100 to 6,000 RPM Spindle Bore: 1.0625″ (27mm) Bar Size – Maximum: 1.0625″ (27mm) Tool Blo
    • Swing: 0"
    • Centers: 0"
      Donaldson Torit Model DB 2000 Downdraft Bench
      $RFQ
      Donaldson Torit Model DB 2000 Downdraft Bench
      WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Nominal Airflow: 2000 CFM Filter Area: 240-508-ft2 Downdraft Velocity: 200 fpm Dust Capacity: 1.4ft3 Max loa
      • Motor: 3HP
        Categories:
        Condition:
        Manufacturer:
        Location:
        Price:
        •  to 
        1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>