buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Tube & Pipe Machinery

Tube & Pipe Machines for Sale

300 new & used tube & pipe machines items for sale
<Prev | 11 | 12 | 13 | 14 | 15
Refine: Viewing 221 - 240 of 300 matches
Sort by:
Items Per Page:  20  |  50 |  100
60" VAUGHN MODEL #60-22-14, SPINNER BLOCK FOR TUBE
$RFQ
60" VAUGHN MODEL #60-22-14, SPINNER BLOCK FOR TUBE
SPECIFICATIONS: TYPE: ROTOBLOC-SPINNER TYPE BLOCK DIAMETER: 60" (1524mm) DIA. DRAWING SPEED: 0-3000 FPM (0-915m/MIN.) DRIVE MOTOR: 200 HP, 1150/1800 RPM, D.C. VARIABLE SPEED WORM GEAR REDUCER: GEAR RATIO 9.
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
$RFQ
1" BURR OAK MODEL #DTHF-M1-10 TUBE CUT-OFF
BUILT 1973 PROCESSES TWO TUBES WITH SEPARATE CONTROLS FOR EACH TUBE SEVEN (7) ROLL HORIZONTAL & SEVEN (7) ROLL VERTICAL PLANE STRAIGHTENER AIR FEED CUTOFFS DRIVEN BY 1/2 HP DC MOTORS - 1725 RPM WITH CONTROLS CAP
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
$RFQ
YODER TUBE STRAIGHTENER & CUT OFF MACHINE
Basket Payoff Straightener YODER Shear Hydraulic Clutch Payoff Table
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
$RFQ
1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
DIA. TUBE CAPACITY................ 3/8" TO 1-1/8" 24 ROLL 2 PLANE STRAIGHTENER FLYING HYD. KNIFE SPEED CUTTING IN STRAIGHT LENGTHS. 250-700 FPM LENGTHS........................... 7' MIN TO 25' LONG LENGTHS
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
$RFQ
5/8" COILCO MODEL #8948 THIN WALL TUBE STRAIGHTEN & CUT-TO-LENGTH LINE, DIA 1/4"
SPECIFICATIONS: YEAR 1985 DESIGNED USE: GENERALY USED TO STRAIGHTEN AND CUT COPPER TUBING SPECIFICATIONS: TUBE CAPACITY .................................. MIN. 1/4" TO MAX. 5/8" STRAIGHTENING R
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
$RFQ
1-1/8" SCHUMAG MODEL #RFS HIGH SPEED FINISHING LINE
CONSISTING OF: - (1) SCHUMAG FINISHING MACHINE, 1/4" TO 1-1/8" OUTSIDE DIAMETER TUBE CAPACITY - (1) 24-STATION COIL STRAIGHTENER, (12) VERTICAL ROLLS, (12) HORIZONTAL ROLLS, - (1) MARKING SYSTEM, - (1)
POONGSAN TUBE LEVEL WIND LINE
$RFQ
POONGSAN TUBE LEVEL WIND LINE
YEAR: 1997 #3 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
POONGSAN TUBE LEVEL WITH LINE
$RFQ
POONGSAN TUBE LEVEL WITH LINE
YEAR: 1997 #2 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
POONGSAN TUBE LEVEL WIND LINE
$RFQ
POONGSAN TUBE LEVEL WIND LINE
YEAR: 1997 #1 MINIMUM TUBE OD ......................... 6mm MAXIMUM TUBE OD ......................... 22.2mm MINIMUM TUBE WALL ....................... 0.35mm MAXIMUM TUBE WALL ....................... 1.0mm
MORGAN TUBE LEVEL WINDING LINE
$RFQ
MORGAN TUBE LEVEL WINDING LINE
SPECIFICATIONS: - LEFT HAND - LINE SPEED 1,500 FPM MAXIMUM - TUBE SIZE .250" OUTSIDE DIAMETER TO .875" OUTSIDE DIAMETER - COIL WIDTH 11.5" TO 15.5" - COIL INSIDE DIAMETER 24" PRE-CAST R
MORGAN TUBE LEVEL WINDING LINE
$RFQ
MORGAN TUBE LEVEL WINDING LINE
SPECIFICATIONS: - RIGHT HAND - LINE SPEED 1,500 FPM MAXIMUM - TUBE SIZE .250" OUTSIDE DIAMETER TO .875" OUTSIDE DIAMETER - COIL WIDTH 11.5" TO 15.5" - COIL INSIDE DIAMETER 24" PRE-CAST
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
$RFQ
ITAM RIGHT HAND LEVEL COIL WINDING SYSTEM
Basket Type 24" ID, 48" OD Tube Capacity: commonly ran 3/4" to 1" OD 25 HP Motor Rotating Dual Take-Up Mandrels 7-Roll Vertical Straightener 7-Roll Horizontal Straightener Rail Mounted Co
4" DIA. ACME CONDUIT THREADER
$RFQ
4" DIA. ACME CONDUIT THREADER
Length - 10' (Est.) Capacity - Currently set-up for 4" diameter tube (Est) O.A. Dim. 24' L x 6' W x 7' H Equipped with: Walking Beam Loader (2 Stations) Mounted Clamping Hydraulic Operated Heads (6) D
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
$RFQ
3" FENN MODEL #30-3 HYDRAULIC TUBE END FORMING MACHINE
One Station Performs Two Jobs Clamp Pressure ....................... 57,000# Thrust (Ram) Presssure ............... 30,000# Work Stroke .......................... 0" - 4" Idle Pressure .....................
NCP TUBE LEVEL WIND LINE
$RFQ
NCP TUBE LEVEL WIND LINE
MANUFACTURER: NATIONAL COPPER CO. TYPE: LEVEL WIND LINE FOR TUBE MAXIMUM TUBE O.D. (AS USED): 7/8" (22mm) O.D. x .045" (1.2mm) WALL THICKNESS MINIMUM TUBE O.D. (AS USED): .312" (8mm) O.D. LINE SPE
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO
CUSTOM DESIGN LEVEL WIND COIL LINE
$RFQ
CUSTOM DESIGN LEVEL WIND COIL LINE
12" H x 41" OD x 27" ID Coil Cap. 1/8" to 3/4" OD Tube Cap, (1) Level Wind Coiler (1) Torrington Model 1821 2 Plain Tube Straightener 12 Roll *ALL SPECIFICATIONS ARE SUBJECT TO VE
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
$RFQ
1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
CAPACITY: MATERIAL - HARD DRAWN COPPER TUBING TUBE DIAMETER RANGE - 1/4" TO 1-1/8" MAXIMUM TUBE WALL THICKNESS - .015" MIN. TO .065" MAX. LINE SPEED - 0 TO 600 FPM ON 1/2" OR 5/8" DIAMET
6" HYDRO STATIC TESTER
$RFQ
6" HYDRO STATIC TESTER
GENERAL SPECIFICATIONS: OPERATION MODES ........... AUTOMATIC / MANUAL / PASS THROUGH PRODUCT SPECIFICATION ..... ASTM A53 MAXIMUM PRESSURE .......... 5,000 PSI MAXIMUM PIPE DIAMETER ..... 6.625"OD MINIMUM PI
Related Subcategories:
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
<Prev | 11 | 12 | 13 | 14 | 15