buy & sell, new & used machinery, machine tools & equipment

<Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>
Refine: Viewing 451 - 500 of 20659 matches
Sort by:
Items Per Page:  20 |  50  |  100
2020 Cat 239D3 Compact Track Loader w/ Bucket RTR#5013389-01
$32,000
2020 Cat 239D3 Compact Track Loader w/ Bucket RTR#5013389-01
Unit located in Lenexa, KS. 2020 Cat 239D3 Compact Track Loader w/ Bucket, Cat C2.2 CRDI Diesel Engine, Hyd Transmission, Enclosed Cab, Power Steering, A/C, Heater, AM/FM Radio, Tape Deck, Rops, Hour Meter Reads: Unknow
4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
$RFQ
4' x 12" Ooya RE-1225H Radial Drill, 1985 RPM, #5 MT, 75" x30
4' x 12" OOYA RADIAL ARM DRILL Model RE-1225H, S/N OA8-21000, New 1979 Stock # Q12015 EQUIPPED WITH: Hardened Arm Ways, Tapping Capabilities, Power Elevation, Power Clamping, Coolant System (Built-In).
  • Arm length: 4.083'
  • Column diameter: 12.625"
    8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
    $RFQ
    8' x 1/2" Bertsch 3-Roll Plate Bending Roll w/Air Drop End, Initia
    8' x 1/2" BERTSCH 3-ROLL INITIAL PINCH PLATE BENDING ROLL Model #9, S/N M-9980, New 1971 Stock # Q12014 EQUIPPED WITH: 3-Roll Hydraulic Initial Pinch Design, Air Drop End, Power Bottom-Roll Adjustment, Dia
    • Roll length: 99"
    • Thickness: 0.406"
      HAAS HL-2BB CNC LATHE
      $5,950
      HAAS HL-2BB CNC LATHE
      BIG BORE, PARTS CATCHER, CHIP CONVEYOR, 3400 RPM, 15 HP, 10"CHUCK
      • Swing: 20"
      • Centers: 20"
        Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
        $RFQ
        Thermo Scientific Heratherm IMH180 Benchtop Incubator, 6.3 CU FT Capacity
        THERMO FISHER SCIENTIFIC BENCHTOP INCUBATOR Model Heratherm IMH180, New 2015 Stock # Q11725, Q11726 (2) Incubators Available FEATURES: Advanced Protocol Microbiological Incubator Capacity 6.3 cu ft (178L) Dual
        15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/
        $RFQ
        15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/
        15-3/4” / 23” x 50” Harrison Alpha 400 Gap Bed-Flat Bed Combination Manual/CNC Teach Lathe SPECIFICATIONS: Swing Over Bed 15.75” 400 MM Swing in Gap 23” 585 MM Gap Width from Faceplate 6.5” 165 MM Swing Over Cr
        2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
        $127,000
        2023 CMC 92HD+ Telescopic Boom Lift w/ Trailer RTR# 4093965-01
        Equipment located in Ashland, VA. 2023 CMC 92HD+ Arbor Pro Telescopic Boom Lift, Diesel Engine, 92' Working Height, 46' Lateral Reach, 507lb Platform Capacity, Multi Position Outriggers, Rubber Tracks, Hour Mete
        CHEVALIER FSG-3A818 SURFACE GRINDER
        $8,950
        CHEVALIER FSG-3A818 SURFACE GRINDER
        2 HP, 8" GRINDING WHEEL
        • Table width: 8"
        • Table length: 18"
          16-36 Barber Colman Universal Gear Hobber
          $RFQ
          16-36 Barber Colman Universal Gear Hobber
          SPECIFICATIONS: Maximum Rated Diameter Pitch (Nominal) 6DP (4.2 Module) Maximum Rated Work Diameter 16” Maximum Hob Diameter 5” Maximum Hob Slide Travel 36” Maximum Work Slide Travel 8” Main Drive Motor 5HP Approx
          No. 16-36 Barber-Colman Universal Gear Hobber
          $RFQ
          No. 16-36 Barber-Colman Universal Gear Hobber
          SPECIFICATIONS: Capacity in Steel, 1 Cut 6 DP (4.2 Mod) Rated Work Diameter Max 16” Travel of Hob Carriage Max 36.5” Distance Work Spindle Face to Tail Center Max 64” Work Spindle to C/L of Hob Spindle Max 39.5” Wo
          2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
          $68,000
          2015 John Deere 824K Wheel Loader w/ Bucket RTR#4083381-01
          Unit located in Stoney Creek, VA. 2015 John Deere 824K Wheel Loader w/Bucket, PowerTech PSX 6135 Diesel Engine, Powershift Transmission, Enclosed Cab, Power Steering, Brakes, Air Ride Seat, A/C, Heater, Hour Meter Reads
          2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
          $57,000
          2022 Wacker Neuson ET65 Compact Excavator RTR#5014945-01
          Unit located in St. Cloud, MN. 2022 Wacker Neuson ET65 Compact Excavator w/ Bucket & Blade, Perkins 404F-22T Diesel Engine, Hyd Transmisson, Enclosed Cab, Hyd Thumb, A/C, Heater, AM/FM Radio, Hour Meter Reads: 151 (
          2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
          $53,000
          2012 Vermeer D9x13 Ser. II HDD w/ Locating System RTR#4123147-01
          Unit located in Thomaston, GA. 2012 Vermeer D9x13 Series II Directional Drill w/ DikgiTrak Locating System, Track Mounted, Kubota Diesel Engine, Rubber Tracks, Rods, Hour Meter Reads: 4,761 (Unverified), 2021 Straight-l
          Haas VF-2SS Machining Center
          $51,500
          Haas VF-2SS Machining Center
          Table: 14" x 36" Spindle: CAT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 24 RPM: 12,000RPM Controller: Haas Year: 2017 4th axis: Ready 5th axis: Available
          Fadal VMC15 Machining Center
          $19,000
          Fadal VMC15 Machining Center
          Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
          428020515002
          $399
          428020515002
          428-02-051-5002 worm drive gear, new, custom made for Rockwell 18" Planer
          2011 Moffett M55 Piggyback Forklift RTR#4123591-01
          $17,500
          2011 Moffett M55 Piggyback Forklift RTR#4123591-01
          Equipment located in Thomaston, GA. 2011 Moffett M55 Piggyback Forklift, 10' Mast, Kubota Diesel Engine, Hydrostatic Transmission, Power Steering, Power Brakes, 2WD, Pneumatic Tires, 48" Fork Length, Front Sta
          2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
          $55,000
          2017 Intermac Master 38.8 CNC Stone Router RTR#4103177-01
          Equipment located in Raleigh, NC. 2017 Intermac Master 38.8 CNC Stone Router, S/N: 1000016281, With Z-Laser LP-HFD2, S/N: 1700008926 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. C
          2018 Bradbury Sheet Slitter
          $8,000
          2018 Bradbury Sheet Slitter
          Lightly used, 2018 Stand Alone Slitter 4.0" diameter hardened & precision ground arbors 42" Passline Maximum Sheet Width 48.50" / Minimum 4.0" Maximum material thickness .048" (18 gauge)
          Legacy Mill 8'
          $750
          Legacy Mill 8'
          Legacy Mill 8' Model: 1500 EX [LegacyWoodworking Machinery] S/N: N/A
          Lathe 24" VS 3hp 24x48 Vcmrc
          $3,900
          Lathe 24" VS 3hp 24x48 Vcmrc
          Lathe 24" VS 3hp 24x48 Vcmrc Model: VL300 [Vicmarc] SN: 149 Variable Speed 24-48 Lathe w/4 Chucks; 9 Face Plates; 5 Tool Rests; 2 Extra Tool Rest Banjos 3Hp; 1Ph; 220Volt
          8' x 3/8" Americor Double Pinch Plate Bending Roll
          $RFQ
          8' x 3/8" Americor Double Pinch Plate Bending Roll
          . We are pleased to offer for your consideration: (1) 3/8" x 8' Americor Double Pinch Plate Bending Roll Stock Number: 13985 List Price: On Request Manufacturer: Americor Model Number: 4RDP 250/8 S
          • Roll length: 100"
          • Thickness: 0.375"
            Fadal VMC15XT Machining Center
            $19,500
            Fadal VMC15XT Machining Center
            Table: 16" x 39" Spindle: BT 40 x-Axis Travel: 30" y-Axis Travel: 16" z-Axis Travel: 20" Tool Turret: 21 RPM: 7,500RPM Controller: Fadal Year: 2006 Voltage / Phase: 220 / 3 Weight: 11,0
            Haas SMINIMILL2 Machining Center
            $34,000
            Haas SMINIMILL2 Machining Center
            Table: 12" x 36" Spindle: CAT 40 x-Axis Travel: 16" y-Axis Travel: 14" z-Axis Travel: 15" Tool Turret: 20 RPM: 10,000RPM Controller: Haas Year: 2018 Voltage / Phase: 220 / 3 Weight: 4,6
            SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
            $RFQ
            SNK PRODIGY MODEL GT-27 CNC GANG TOOL LATHE, MFG. 2006
            WE APOLOGIZE THAT THE PHOTOS ARE NOT ROTATED CORRECTLY. I AM UNABLE TO MAKE THAT CHANGE. Spindle RPM – Variable: 100 to 6,000 RPM Spindle Bore: 1.0625″ (27mm) Bar Size – Maximum: 1.0625″ (27mm) Tool Blo
            • Swing: 0"
            • Centers: 0"
              Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center
              $RFQ
              Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center
              Reference #43984 Okuma Genos M460V-AX 5-Axis CNC Vertical Machining Center FEATURES: OSP-P300MA-H CNC Control A/C-Axis Rotary Trunnion Table Renishaw Tool & Part Probe 32-Position ATC 15,000 RPM Spindle Thr
              • X axis: 30"
              • Y axis: 18.11"
                National 5/16" Cold Header
                $12,500
                National 5/16" Cold Header
                National 5/16" High Speed Cold Header, DSSD Capacity: 5/16" x 1-1/2" ***Complete inspection report. Has not been used for production since inspection. Specifications: Maximum Cutoff Diameter: 5/16
                • Maximum workpiece diameter: 0.312"
                • Maximum workpiece length: 1.5"
                  HNK NT-14/16FD CNC Vertical Lathe
                  $RFQ
                  HNK NT-14/16FD CNC Vertical Lathe
                  Reference #43872 HNK NT-14/16FD CNC Vertical Lathe FEATURES: Fanuc 18T CNC Control (2) Vertical Rams (2) 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Specifications:
                  • Swing: 62.99"
                    HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                    $RFQ
                    HNK VTB-12/16 47"/63" CNC Vertical Boring Mill
                    Reference #43871 HNK VTB-12/16 47"/63" CNC Vertical Boring Mill FEATURES: Fanuc 18T CNC Control Vertical Ram 12 Position Automatic Tool Changer Full Chip & Coolant Guards, Chip Conveyor Spec
                    • Swing: 62.99"
                      MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                      $RFQ
                      MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002
                      MORI SEIKI ZL150S Duel Turret/Sub-spindle Cnc Lathe 2002 S/N ZL150BE0266 SPECIFICATIONS Bar Capacity 1.77" Swing 26.77" Turning Diameter 17.32" Spindle Speed 5,000 RPM Co
                      40 Ton Trumpf 7036 CNC Electric Servo Press Brake
                      $RFQ
                      40 Ton Trumpf 7036 CNC Electric Servo Press Brake
                      Reference #43409 40 Ton Trumpf 7036 CNC Electric Servo Press Brake FEATURES: Tasc 6000 CNC Control w/ Operator Swivel Unit (6) Axis Back Gauge Hydraulic Tool Clamps LED Work Area Lighting Front & Rear Comfor
                      • Tonnage: 40T
                        BACE Model V63HD Vertical Baler
                        $RFQ
                        BACE Model V63HD Vertical Baler
                        SPECIFICATIONS: Nominal Bale Size 60” x 30” x 48” Height Bale Weight Up to 1,100 lbs. Bale Volume 50 cu. ft. No. of Bale Tie Slots 5 Loading Height 54 – ½” Ejector System Semi-Automatic Hydraulic Motor 15 HP
                        Doral 6048 6-Wheel Structural Plate Shot Blast System
                        $RFQ
                        Doral 6048 6-Wheel Structural Plate Shot Blast System
                        Reference #43956 Doral 6048 6-Wheel Structural Plate Shot Blast System FEATURES: Less than 100 Hours Blasting Hours! MAXIMUM WORK: Maximum Plate Width ................... 62" Maximum I-Beam ...............
                        ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                        $104,995
                        ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-Combo Pkg SAVE BIG $$!
                        CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! Distributor Overstock Mega Sale Selling At Well Below Cost with Factory Warranty. Limited Supplies Available. ERBEND 10ft x 16 ga CNC Folder w/10ft x 14 ga Shear-
                        • Maximum thickness capacity: 16Ga
                        • Bending length: 126"
                          2008 AMADA Pulsar 2415NT
                          $RFQ
                          2008 AMADA Pulsar 2415NT
                          2008 AMADA Pulsar 2415NT, 4.0 KW, Max sheet size: 16’ X 5, Fanuc NT-PC Control, Year New: 2008 Model: Pulsar 2415NT Laser Power: 4.0 KW Laser Type: High Bred Max Sheet Size: 16’ X 5’ Reposition: Yes Z Axis Travel
                          • Wattage: 4000W
                          • X axis travel: 5'
                            2018 AMADA LCG3015AJ
                            $RFQ
                            2018 AMADA LCG3015AJ
                            AMADA LCG3015AJ, 2.0KW, 120” X 60” Max Sheet Size, Fanuc NT-PC Control, Year New: 2018 Model: LCG3015AJ Laser Power: 2.0KW Laser Type: Flying Optic Max Sheet Size: 120” X 60” Shuttle Table: Yes Z Axis Travel: 7.8
                            • Wattage: 2000W
                            • X axis travel: 5'
                              MITSUBISHI FX-1 WIRE EDM
                              $4,950
                              MITSUBISHI FX-1 WIRE EDM
                              SUBMERGED
                              • X axis travel: 14"
                              • Y axis travel: 10"
                                2020 AMADA Ensis 3015NT
                                $RFQ
                                2020 AMADA Ensis 3015NT
                                2020 Ensis 3015NT, 3.0 KW, 120" x 60" Max Sheet Size, Fanuc NT-PC Control Model: Ensis 3015NT Laser Power: 3kw Laser Type: Flying Optic Max Sheet Size: 120" x 60" Shuttle Table: Yes Z-Axis: 7.
                                • Wattage: 3000W
                                • X axis travel: 5'
                                  Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                  $RFQ
                                  Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine,
                                  Zoller Venturion 600 (V420E2) Tool Pre-Setting and Measuring Machine, Upgraded 2011 SPECIFICATIONS: Measuring Range Z 23.6” Measuring Range X 8.7” Diameter 17.3” EQUIPPED WITH: Zoller Pilot 3.0 Operating and Ima
                                  Zoller Saturn 2 V420E2 Tool Presetting Machine
                                  $RFQ
                                  Zoller Saturn 2 V420E2 Tool Presetting Machine
                                  SPECIFICATIONS: Measuring Range Z 600mm (23.6”) Measuring Range X 350mm (13.7”) Max Tool Weight 20kg EQUIPPED WITH: Windows NTPC (with Diskettes). Zoller Multivision II Software (Diskettes Included). Keyboard and
                                  2020 AMADA Ensis 3015NT
                                  $RFQ
                                  2020 AMADA Ensis 3015NT
                                  2020 Ensis 3015NT, 3.0 KW, 120" x 60" Max Sheet Size, Fanuc NT-PC Control Model: Amada Ensis 3015NT Laser Power: 3kw Laser Type: Flying Optic Max Sheet Size: 120" x 60" Shuttle Table: Yes Z-Ax
                                  • Wattage: 3000W
                                  • X axis travel: 5'
                                    1973 John Deere 570A Motor Grader RTR# 4101190-01
                                    $9,000
                                    1973 John Deere 570A Motor Grader RTR# 4101190-01
                                    Unit located in Grand Junction, CO. 1973 John Deere 570A Motor Grader, 6 Cylinder Diesel Engine, Power Shift Transmission, Enclosed Cab, Blade, 4WD, Hour Meter Reads: 2,063 (Unverified), S/N: 001992T All equipment is s
                                    FPT Stinger 5-Axis CNC Vert Machining Cntr, 51" x39.3" tbl, XYZ=6
                                    $RFQ
                                    FPT Stinger 5-Axis CNC Vert Machining Cntr, 51" x39.3" tbl, XYZ=6
                                    FPT 5-AXIS CNC VERTICAL MACHINING CENTER Model Stinger, New 2004 Stock # Q11946 EQUIPPED WITH: Heidenhain TNC 430 CNC Control, 60 Station Automatic Tool Changer, Through the Spindle Coolant, Coolant System, Chip Co
                                    • X axis: 68.5"
                                    • Y axis: 55"
                                      BLANCHARD GRINDER
                                      $7,950
                                      BLANCHARD GRINDER
                                      42" CHUCK
                                      • Chuck: 42"
                                        MATTISON HORIZONTAL SURFACE GRINER
                                        $7,950
                                        MATTISON HORIZONTAL SURFACE GRINER
                                        18X72
                                        • Table width: 18"
                                        • Table length: 72"
                                          Doosan DHP-4000 CNC Horizontal Machining Center
                                          $RFQ
                                          Doosan DHP-4000 CNC Horizontal Machining Center
                                          Reference #43865 Doosan DHP-4000 CNC Horizontal Machining Center FEATURES: Fanuc 18i-MB CNC Control 60-Station Automatic Tool Changer 2-Station Automatic Pallet Changer 14,000 RPM Spindle Coolant Thru Spind
                                          • X axis: 23.62"
                                          • Y axis: 22.05"
                                            Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                            $RFQ
                                            Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe
                                            Reference #27429 Poreba TGZ 400B x 10M, 157" x 393" Universal Lathe FEATURES: Component Style Displaceable Headstock Displaceable Tailstock 30 Ton Weight Capacity CAPACITY: Maximum Turning Dia.Over
                                            • Swing: 157.48"
                                            • Centers: 393.7"
                                              Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                              $RFQ
                                              Sunfirm CST-42160-10A CNC Hollow Spindle Lathe
                                              Reference #43784 Sunfirm CST-42160-10A CNC Hollow Spindle Lathe FEATURES: Fanuc OiTC CNC Controls 8-Position Turret 24" 4-Jaw Front Chuck 30" 3-Jaw Rear Chuck 10" Spindle Bore Chip Convey
                                              • Swing: 42"
                                              • Spindle hole diameter: 10"
                                                GOULD & EBERHARDT 96H Gear Hobber
                                                $RFQ
                                                GOULD & EBERHARDT 96H Gear Hobber
                                                Reference #19028 GOULD & EBERHARDT 96H Gear Hobber FEATURES: 125" Maximum Diameter Capacity 78" Diameter Work Table Large Assortment of Change Gears (1) HOB ARBOR Chip Conveyor Miscellaneous Guar
                                                • Maximum gear diameter: 98"
                                                  2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
                                                  $14,000
                                                  2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift RTR#4073800-01
                                                  Equipment located in Raleigh, NC. 2012 Skyjack SJ66T 66' 4x4 Telescopic Boom Lift, Deutz 64HP Diesel Engine, 500lb Capacity, Hour Meter Reads: 93 (Unverified), SN: 97000452 All equipment is sold “As Is, Where Is”.
                                                  Categories:
                                                  Condition:
                                                  Manufacturer:
                                                  Location:
                                                  Price:
                                                  •  to 
                                                  <Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>