buy & sell, new & used machinery, machine tools & equipment

<Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>
Refine: Viewing 751 - 800 of 20659 matches
Sort by:
Items Per Page:  20 |  50  |  100
Est. 2019 Arrow-Slitter 1500 By Arrow Systems RTR#4082483-01
$4,000
Est. 2019 Arrow-Slitter 1500 By Arrow Systems RTR#4082483-01
Equipment located in Salem, OR. Est. 2019 Arrow-Slitter 1500 By Arrow Systems Inc. 15" Wide Table-Top Label Slitter All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspect
KRB Model 34518 STIRRUP-Matic Automatic Rebar Former/Shear
$RFQ
KRB Model 34518 STIRRUP-Matic Automatic Rebar Former/Shear
SPECIFICATIONS: Bar Sizes 3, 4, 5 (10-16mm) Dual Strand Bar Sizes 3, 4 Feed Rate (Variable) 0-200 fpm (61 mpm) Main Motor 20 HP Approximate Floor Space 15’ x 30’ EQUIPPED WITH: Console Mounted Micro Computer Cont
2015 John Deere 318E Skid Steer w/Bucket RTR#4103325-01
$14,000
2015 John Deere 318E Skid Steer w/Bucket RTR#4103325-01
Unit located in San Antonio, TX. 2015 John Deere 318E Skid Steer w/Bucket, 4TNV98C Yanmar Diesel Engine, Hyd Transmission, Open Cab, Hour Meter Reads: 1,294 (Unverified), S/N: 1T0318EAPFJ285132 All equipment is sold
1993 Cat 320L Crawler Mounted Hyd Excavator RTR#4103990-01
$15,000
1993 Cat 320L Crawler Mounted Hyd Excavator RTR#4103990-01
Unit located in Joplin, MO. 1993 Cat 320L Crawler Mounted Hyd Excavator, 3066 Cat Diesel Engine, Hyd Transmission, Enclosed Cab, Hour Meter Reads: 14,388, S/N: 9KK00960 All equipment is sold “As Is, Where Is”. Reas
Barnes PE-15, Paper Filter Bed, 17 GPM, 78 Gallons
$RFQ
Barnes PE-15, Paper Filter Bed, 17 GPM, 78 Gallons
Serial No. TCF 9297 SPECIFICATIONS: Tank Capacity............78 Gallons Flow Rate Capacity: - Water Soluble - Steel............17 GPM - Water Soluble - Cast Iron............9 GPM - Oil - 50 SSU...........6.5 GPM
3"L Part Cap, Warren Mini WW-500, Heated Wash - Dry, Auger, Oil Skimme
$RFQ
3"L Part Cap, Warren Mini WW-500, Heated Wash - Dry, Auger, Oil Skimme
New - 1998 Serial No. 0498385 SPECIFICATIONS: Part Length - Maximum............3" Tank Capacity............25 or 50 gal Oil Separation............Single Disk Drive Motor............Vari-Speed Wash Pump....
Barnes MPE-15, Combination Magnetic Drum / Paper Filter, 2002
$RFQ
Barnes MPE-15, Combination Magnetic Drum / Paper Filter, 2002
New - 2002 Serial No. 9605 The MPE series for positive "two-stage" coolant cleaning, combined the fabric filter with the popular Barnes magnetic separator. In the first stage, dirty coolant flows through a
T-M PC-26, 350°F, 26" x 26" x 26" Chamber, 23.2 cfm, 10
$RFQ
T-M PC-26, 350°F, 26" x 26" x 26" Chamber, 23.2 cfm, 10
New - 2004 Serial No. 04.12951204.1 SPECIFICATIONS: Chamber Size............26"W x 26"D x 26"H Temperature (Continous) - Maximum............350°F Time to Max. Temperature............25 Mins und
Current CT500F, 22"X, 14"Y, 16"Z, 10.5"G, 21.6" x
$RFQ
Current CT500F, 22"X, 14"Y, 16"Z, 10.5"G, 21.6" x
Serial No. 87071 Year - 2000 SPECIFICATIONS: Travels: - X-axis............22" - Y-axis............14" - Z-axis............16" - G-axis............10.5" Guide to Table - Minimum...........
Accurpress 100 Ton x 12' Hydraulic Press Brake
$RFQ
Accurpress 100 Ton x 12' Hydraulic Press Brake
Accurpress 100 Ton x 12' Hydraulic Press Brake S/N: 1614, Mfg: 1990, Stock No: 18354 Model: 710012 Capacity: 100 Tons Overall Bed Length: 144" Distance Between Housings: 126" Stroke: 8" Open He
  • Tonnage: 100T
    HM MACHINERY HM 1300 2n1 4 ft x 20 ga. Combo Brake
    $RFQ
    HM MACHINERY HM 1300 2n1 4 ft x 20 ga. Combo Brake
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 1300 2n1 Combo Brake is the perfect way to get maximum versatility in a manual brake. This combo package includes 2 different interchangeable tooling sec
    HM MACHINERY HM HS-3S-3SH 4 ft x 12 ga. Universal Manual Brake
    $RFQ
    HM MACHINERY HM HS-3S-3SH 4 ft x 12 ga. Universal Manual Brake
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HS-3S-3SH Universal Manual Brake is a 50 inch, 12 gauge universal brake with segmented top and bottom bending surfaces. The HS-3S-3SH brake allows bending in inverse
    HM MACHINERY HM MRM 1550-130 60 in. x 3 ga. Power Roll
    $RFQ
    HM MACHINERY HM MRM 1550-130 60 in. x 3 ga. Power Roll
    CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery MRM 1550-130 Power Roll is a heavy duty motorized bending roll, with 3 rolls mounted on solid steel gable-ends, for heavy gauge, large scale fabrication.
    • Roll length: 60"
      HM MACHINERY HM CS125 1452 4 ft x 14 ga. Air Shear
      $RFQ
      HM MACHINERY HM CS125 1452 4 ft x 14 ga. Air Shear
      CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery CS125 1452 Air Shear (14 ga x 52 in.) is an extremely accurate pneumatically operated machine, ideal for cutting both metal and plastics. *Its ergonomic
      HM MACHINERY HM TTE 1848 48 in. x 18 ga. Power Slip Roll
      $RFQ
      HM MACHINERY HM TTE 1848 48 in. x 18 ga. Power Slip Roll
      CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery TTE 1848 Power Slip Roll (18ga x 48 in.) has asymmetric rolls and adjustable roller speed, making pre-bending easy and accurate. *The rolls are crowned
      • Roll length: 50"
        HM MACHINERY HM ZP45 10 in. Tube Deburring Machine
        $RFQ
        HM MACHINERY HM ZP45 10 in. Tube Deburring Machine
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery ZP45 Tube Deburring Machine is a single rotary wheel design, designed for deburring the inside and outside of a tube simultaneously. The ZP45 utilizes a
        HM MACHINERY HM ZA 250X 3/8 in. Sheet Deburring Machine w/Duct Extractor
        $RFQ
        HM MACHINERY HM ZA 250X 3/8 in. Sheet Deburring Machine w/Duct Extractor
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery ZA250X Sheet Deburring Machine is a dual wheel design, with integrated dust extraction, designed for deburring the edges of sheet or plate metal up to 10
        HM MACHINERY HM ZA 250 3/8 in. Sheet Deburring Machine
        $RFQ
        HM MACHINERY HM ZA 250 3/8 in. Sheet Deburring Machine
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: The HM Machinery ZA250 Sheet Deburring Machine is a dual wheel design, designed for deburring the edges of sheet or plate metal up to 10mm or 3/8" thick. The ZA250 ut
        HM MACHINERY HM TAS-150 6x79 in. Belt Grinder
        $RFQ
        HM MACHINERY HM TAS-150 6x79 in. Belt Grinder
        CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 6" x79" Belt Grinder is versatile machine, designed with thoughtful features for metal grinding and fabrication. The 6" grinder was design
        • Belt width: 6"
          HM MACHINERY HM 2000L 6 ft x 20 ga. Straight Brake
          $RFQ
          HM MACHINERY HM 2000L 6 ft x 20 ga. Straight Brake
          CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 2000L 6ft x 20 ga Straight Brake is a durable, large-scale manual brake designed to produce consistent high quality bends up to 79″ wide in high-producti
          • Maximum bending capacity: 20Ga
          • Bending length: 79"
            Powermatic PM201B Bandsaw
            $2,900
            Powermatic PM201B Bandsaw
            This machine has hardly been used and is in like new condition. This machine new is $7,200.00
            • Throat: 20"
            • Blade: 170"
              Powermatic 3520A Wood Lathe
              $2,700
              Powermatic 3520A Wood Lathe
              This machine is like brand new and only used once. We used it once in the shop when we got it and put it in the corner to collect dust for years. It is 220V three phase but if you need to convert to 110V single phase th
              HM MACHINERY HM HS-7S 6 ft x 16 ga. Box and Pan Brake
              $RFQ
              HM MACHINERY HM HS-7S 6 ft x 16 ga. Box and Pan Brake
              CALL 386-304-3720 FOR AVAILABILITY FEATURES: The HM Machinery HS-7S 6ft x 16 ga Box and Pan Brake is a large scale brake with angled segmented tooling, designed for the fabrication of both straight and box and pan pr
              • Bending length: 79"
                HM MACHINERY HM ES100/3 4 x 4 in. x 11 ga. Manual Corner Notcher
                $RFQ
                HM MACHINERY HM ES100/3 4 x 4 in. x 11 ga. Manual Corner Notcher
                CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 4×4 11 gauge manual corner notcher is ruggedly constructed, and provides a fast, simple, cost-effective way of notching sheet material up to 11ga in
                HM MACHINERY HM TAS-75 3x79 in. Belt Grinder
                $RFQ
                HM MACHINERY HM TAS-75 3x79 in. Belt Grinder
                CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 3x79 in. Belt Grinder is versatile machine, designed with thoughtful features for metal grinding and fabrication. The 3 in. grinder was designed with erg
                • Belt width: 3"
                  HM MACHINERY HM 1300S 4ft x 20ga. Finger Brake
                  $RFQ
                  HM MACHINERY HM 1300S 4ft x 20ga. Finger Brake
                  CALL 386-304-3720 FOR AVAILABILITY FEATURES: The HM Machinery 1300S 4ft x 20 ga Box and Pan Brake (claw foot fingers) is a simple and easy to operate segmented brake. Lightweight, but robustly constructed, this manua
                  • Bending length: 53"
                    HM MACHINERY HM 1300H 4 ft x 20 ga. Straight Brake
                    $RFQ
                    HM MACHINERY HM 1300H 4 ft x 20 ga. Straight Brake
                    CALL 386-304-3720 FOR AVAILABILITY FEATURES: The HM Machinery 1300H 4ft x 20 ga. Straight Brake (claw foot nose bar) is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine
                    • Maximum bending capacity: 20Ga
                    • Bending length: 53"
                      HM MACHINERY HM 1300L 4ft x 20ga. Straight Brake w/Angled Nose Bar
                      $RFQ
                      HM MACHINERY HM 1300L 4ft x 20ga. Straight Brake w/Angled Nose Bar
                      CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery 1300L 4ft x 20 ga Straight Brake w/ Angle Nose Bar is a simple and easy to operate manual brake. Light weight, but robustly constructed, this machine is
                      • Maximum bending capacity: 20Ga
                      • Bending length: 53"
                        HM MACHINERY HM HS 3S-S 4ft x 16ga. Universal Brake
                        $RFQ
                        HM MACHINERY HM HS 3S-S 4ft x 16ga. Universal Brake
                        CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery HS-3S-S 4ft x 16 ga Universal Brake is a large scale brake with segmented tooling, designed for the fabrication of box and pan and other special profiles
                        • Bending length: 50"
                          HM MACHINERY HM HS-3S 4ft x 14ga. Manual Box and Pan Brake w/Foot Clamp
                          $RFQ
                          HM MACHINERY HM HS-3S 4ft x 14ga. Manual Box and Pan Brake w/Foot Clamp
                          CALL 386-304-3720 FOR AVAILABILITY FEATURES: *The HM Machinery HS-3S 4ft x 14 ga Box and Pan Brake w/ Foot Clamp is a large scale brake with angled segmented tooling, designed for the fabrication both straight and bo
                          • Bending length: 50"
                            2012 John Deere 350GLC Excavator RTR#4093565-01
                            $39,000
                            2012 John Deere 350GLC Excavator RTR#4093565-01
                            Equipment located in Maiden, NC. 2012 John Deere 350GLC Crawler Mounted Excavator w/ Bucket, PSX 9.0L John Deere Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, Hour Meter Reads: 10,760 (Unverif
                            LUCIFER 1200 F ELECTRIC BOX DRAW FURNACE 3'W 3'L 2'4
                            $RFQ
                            LUCIFER 1200 F ELECTRIC BOX DRAW FURNACE 3'W 3'L 2'4
                            HONEYWELL DIGITAL TEMPERATURE CONTROL. SINGLE SIDE SWING DOOR. COIL TYPE HEATING ELEMENTS IN CERAMIC PLATE HOLDERS ARE MOUNTED ON BOTH SIDE WALLS BEHIND THE STAINLESS STEEL SHROUD. HEATED AIR IS CIRCULATED BY A FAN IN
                            • Chamber width: 36"
                            • Chamber length: 36"
                              WISCONSIN 550 F ELECTRIC WALK IN OVEN 5'W 6'L 6'H
                              $RFQ
                              WISCONSIN 550 F ELECTRIC WALK IN OVEN 5'W 6'L 6'H
                              AUTOMATION DIRECT TOUCH SCREEN PLC & HMI MOUNTED IN ENCLOSED PANEL DOUBLE DOOR OPENING WITH PRESSURE TYPE PATCHES. HEATING ELEMENTS AND BELT DRIVEN CIRCULATING FAN ARE MOUNTED IN ROOF MOUNTED CHAMBER. HEATED AIR ENT
                              • Chamber width: 60"
                              • Chamber length: 72"
                                SURFACE COMBUSTION SUPER ALLCASE AUTOMATIC INTERNAL OIL QUENCH
                                $RFQ
                                SURFACE COMBUSTION SUPER ALLCASE AUTOMATIC INTERNAL OIL QUENCH
                                IN/OUT DESIGN USED WITH EXTENDED REACH CHARGE CAR (NOT SUPPLIED). HEAT IS SUPPLIED BY (4) GAS FIRED RECOUPERATED RADIANT TUBE BURNERS FIRING FROM THE REAR WALL. TOUCH SCREEN CONTROL WITH DIGITAL TEMPERATURE CONTROLS. SHI
                                • Chamber width: 30"
                                • Chamber length: 48"
                                  1979 Link-Belt LS98TL Yarder w/ Boom RTR#4041640-01
                                  $11,000
                                  1979 Link-Belt LS98TL Yarder w/ Boom RTR#4041640-01
                                  Equipment located in Brooks, OR. 1979 Link-Belt LS98TL Yarder w/ Boom, Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, CD Player, Hour Meter Reads: Unknown (Unverified), S/N: Unknown (Unverifie
                                  2023 Mpac/Langen B1-M Manual Load Cartoner RTR#4081120-01
                                  $40,000
                                  2023 Mpac/Langen B1-M Manual Load Cartoner RTR#4081120-01
                                  Equipment located in Phoenix, AZ 2023 Mpac/Langen B1-M Manual Load Cartoner, Left Hand 6' Load and 9" Pitch, 204v/3PH/60HZ, Machine Number: MN102631, With Nordson DuraBlue 4 Glue Machine, Serial No: NC22L49580
                                  Band Saw 18" 1.75hp w/Fnc Jet
                                  $1,999
                                  Band Saw 18" 1.75hp w/Fnc Jet
                                  Band Saw 18" 1.75hp w/Fnc Jet Model: 710750 JWBS-18X [Jet] S/N: 0507631 18" Band Saw w/Fence 1.75Hp; 1Ph; 115/230Volt
                                  Doosan DMV3016Ld CNC Vert Machining Cntr, 40" x18" tbl,XYZ=30/16/
                                  $RFQ
                                  Doosan DMV3016Ld CNC Vert Machining Cntr, 40" x18" tbl,XYZ=30/16/
                                  DAEWOO DOOSAN DMV3016LD CNC VERTICAL MACHINING CENTER Model DMV-3016Ld, S/N NM4100713, New 2007 Stock # Q11939 EQUIPPED WITH: Fanuc Oi-MC CNC Control, 40" x 18" Table, 8000 RPM Spindle, Flood Coolant, Chi
                                  • X axis: 30"
                                  • Y axis: 16"
                                    GMC SCM-5018RD 50 in. x 18 ga. Seam Closing Machine
                                    $RFQ
                                    GMC SCM-5018RD 50 in. x 18 ga. Seam Closing Machine
                                    CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Ideal to make round ducting thru this powered Seam Closing Machine. *Perfect for efficiently creating round ducting, this powered Seam Closing Machine streamlines and st
                                    Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                                    $RFQ
                                    Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                                    Reference #43761 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
                                    • X axis measuring range: 47.44"
                                    • Y axis measuring range: 118.31"
                                      Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                                      $RFQ
                                      Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                                      Reference #43748 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
                                      • X axis measuring range: 47.44"
                                      • Y axis measuring range: 118.31"
                                        4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
                                        $RFQ
                                        4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
                                        SPECIFICATIONS: Drill Capacity 1” Diameter Drill Head Stroke 18” Spindle Horsepower (4) at 10 HP Each Number of Drill Bases 2 Number of Spindles 4 Feed Rate .1 IPM to 30.0 IPM Rapid Retraction of Drill Head
                                        Pines 5T CNC Vertical Tube Bender
                                        $RFQ
                                        Pines 5T CNC Vertical Tube Bender
                                        Pines 5T CNC Vertical Tube Bender S/N: 44362-72391, Stock No: 87358 Model: 5T Remanufactured by PR Machine Capacity: 1-1/4" OD x .065 Wall Max Bending Angle: 140° Min Centerline Radius: 3 Times Tube Diame
                                        • Maximum diameter: 1.25"
                                          Lemas Roller TR120/5
                                          $25,000
                                          Lemas Roller TR120/5
                                          Lemas Roller, Model TR 120/5. 5', 10 gage machine. This machine is essentially brand new. It was purchased in error and was not what the folks on our shop floor were looking for. 480V 3 phase. Virtually never us
                                          • Width: 60"
                                          • Thickness: 0.135"
                                            Flow Waterjet - Mach 3 w Dynamic Head
                                            $38,000
                                            Flow Waterjet - Mach 3 w Dynamic Head
                                            Flow waterjet, Mach 3 w dynamic head. 480V, 55K PSI, 4'x8'. 2010 model with direct drive, 30HP pump. One owner. Meticulous maintenance with records to back it up. The only issue to disclose is that the abras
                                            • Output Pressure: 55000PSI
                                            • Motor: 30HP
                                              KITAMURA MYCENTER 2XIF
                                              $12,950
                                              KITAMURA MYCENTER 2XIF
                                              FANUC 16iM, 20,000 RPM, PALLET CHANGER, 24 ATC
                                              • X axis: 20"
                                              • Y axis: 14"
                                                6" Manual 3 Jaw Lathe Chuck
                                                $250
                                                6" Manual 3 Jaw Lathe Chuck
                                                6" Manual 3 Jaw Lathe Chuck Year of Mfg: 2013 Chuck Type: Self-Centering Chuck Diameter: 6" Number Of Jaws: 3 Mount Type: Plain Back Body Material: Cast Iron Adjustable: No Number of Jaw Piec
                                                2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
                                                $76,000
                                                2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
                                                Equipment located in Salem, OR. 2004 Peterson 2400B Recycler T/A Horizontal Grinder, Cat C15 Diesel Engine, Hyd Transmission, 580 Hp, Feed System, 24 Fixed Hammer, Hour Meter Reads: 113 (Unverified), S/N: 17B-177-842
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                                                $250
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering Year of Mfg: 2013 *New In Box, 2 Available* Chuck Type Self-Centering Chuck Diameter: 4" / 101.6 mm Number Of Jaws: 3 Mount Type: Plain Back
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                                                $225
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                                                Manual 4" Lathe Chuck - 3 Jaw, Self Centering Year of Mfg: 2013 *Used, 2 Available* Chuck Type Self-Centering Chuck Diameter: 4" / 101.6 mm Number Of Jaws: 3 Mount Type: Plain Back Body
                                                Categories:
                                                Condition:
                                                Manufacturer:
                                                Location:
                                                Price:
                                                •  to 
                                                <Prev | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | Next>