buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 141 - 160 of 21106 matches
Sort by:
Items Per Page:  20  |  50 |  100
GRIEVE ELECTRIC 400 F UNUSED CABINET OVEN 3'W 3'L 3'H
$RFQ
GRIEVE ELECTRIC 400 F UNUSED CABINET OVEN 3'W 3'L 3'H
DIGITAL TEMPERATURE CONTROL. UNUSED CABINET OVEN PURCHASED 2015 NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND ROOF MOUNTED CIRCULATING FAN. STAINLESS STEEL INTERIOR HAS PROVISIONS FOR (10) SHELVES
  • Chamber width: 36"
  • Chamber length: 36"
    WISCONSIN 550 F ELECTRIC WALK IN OVEN 5'W 6'L 6'H
    $RFQ
    WISCONSIN 550 F ELECTRIC WALK IN OVEN 5'W 6'L 6'H
    AUTOMATION DIRECT TOUCH SCREEN PLC & HMI MOUNTED IN ENCLOSED PANEL DOUBLE DOOR OPENING WITH PRESSURE TYPE PATCHES. HEATING ELEMENTS AND BELT DRIVEN CIRCULATING FAN ARE MOUNTED IN ROOF MOUNTED CHAMBER. HEATED AIR ENT
    • Chamber width: 60"
    • Chamber length: 72"
      SURFACE COMBUSTION SUPER ALLCASE AUTOMATIC INTERNAL OIL QUENCH
      $RFQ
      SURFACE COMBUSTION SUPER ALLCASE AUTOMATIC INTERNAL OIL QUENCH
      IN/OUT DESIGN USED WITH EXTENDED REACH CHARGE CAR (NOT SUPPLIED). HEAT IS SUPPLIED BY (4) GAS FIRED RECOUPERATED RADIANT TUBE BURNERS FIRING FROM THE REAR WALL. TOUCH SCREEN CONTROL WITH DIGITAL TEMPERATURE CONTROLS. SHI
      • Chamber width: 30"
      • Chamber length: 48"
        STEELMAN 500 F ELECTRIC WALK IN 4'W 5'L 5'H, SOLVENT RATED
        $RFQ
        STEELMAN 500 F ELECTRIC WALK IN 4'W 5'L 5'H, SOLVENT RATED
        DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATED AIR, WHICH ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH BACK WALL IS CIRCULATED BY (2) FANS MOUNTED IN THE REAR. AIR SAFETY SWITCHES MONITORING T
        • Chamber width: 48"
        • Chamber length: 60"
          1979 Link-Belt LS98TL Yarder w/ Boom RTR#4041640-01
          $15,000
          1979 Link-Belt LS98TL Yarder w/ Boom RTR#4041640-01
          Equipment located in Brooks, OR. 1979 Link-Belt LS98TL Yarder w/ Boom, Diesel Engine, Hyd Transmission, Enclosed Cab, A/C, Heater, AM/FM Radio, CD Player, Hour Meter Reads: Unknown (Unverified), S/N: Unknown (Unverifie
          2023 Mpac/Langen B1-M Manual Load Cartoner RTR#4081120-01
          $52,000
          2023 Mpac/Langen B1-M Manual Load Cartoner RTR#4081120-01
          Equipment located in Phoenix, AZ 2023 Mpac/Langen B1-M Manual Load Cartoner, Left Hand 6' Load and 9" Pitch, 204v/3PH/60HZ, Machine Number: MN102631, With Nordson DuraBlue 4 Glue Machine, Serial No: NC22L49580
          Band Saw 18" 1.75hp w/Fnc Jet
          $1,999
          Band Saw 18" 1.75hp w/Fnc Jet
          Band Saw 18" 1.75hp w/Fnc Jet Model: 710750 JWBS-18X [Jet] S/N: 0507631 18" Band Saw w/Fence 1.75Hp; 1Ph; 115/230Volt
          Doosan DMV3016Ld CNC Vert Machining Cntr, 40" x18" tbl,XYZ=30/16/
          $RFQ
          Doosan DMV3016Ld CNC Vert Machining Cntr, 40" x18" tbl,XYZ=30/16/
          DAEWOO DOOSAN DMV3016LD CNC VERTICAL MACHINING CENTER Model DMV-3016Ld, S/N NM4100713, New 2007 Stock # Q11939 EQUIPPED WITH: Fanuc Oi-MC CNC Control, 40" x 18" Table, 8000 RPM Spindle, Flood Coolant, Chi
          • X axis: 30"
          • Y axis: 16"
            2015 - 22 Ton Amada AE2510NT Servo Driven Turret Punch *ONLY 3000 Hours*
            $RFQ
            2015 - 22 Ton Amada AE2510NT Servo Driven Turret Punch *ONLY 3000 Hours*
            Capacity 22 Ton Maximum Sheet Size (w/o repo) 50"x98" (50"x196" with repo) Throat Depth 52" Maximum Sheet Thickness 1/4" Turret Style Thick Turret Stations 45 Stations Turret Rotation
            • Tonnage: 22T
              GMC SCM-5018RD 50 in. x 18 ga. Seam Closing Machine
              $RFQ
              GMC SCM-5018RD 50 in. x 18 ga. Seam Closing Machine
              CALL 386-304-3720 FOR AVAILABILITY FEATURES: *Ideal to make round ducting thru this powered Seam Closing Machine. *Perfect for efficiently creating round ducting, this powered Seam Closing Machine streamlines and st
              Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
              $RFQ
              Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
              Reference #43761 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
              • X axis measuring range: 47.44"
              • Y axis measuring range: 118.31"
                Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                $RFQ
                Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine
                Reference #43748 Mitutoyo Bright Apex A1220 CNC Coordinate Measuring Machine FEATURES: 118" x 62" Granite Table Renishaw PH10M Probe HCU1 Renishaw Control Mitutoyo JSBOX-M Control Pendant CAPACITIES:
                • X axis measuring range: 47.44"
                • Y axis measuring range: 118.31"
                  4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
                  $RFQ
                  4-Spindle 1” x 18” Dehoff Model 1018 4-Spin Gun Drilling Machine
                  SPECIFICATIONS: Drill Capacity 1” Diameter Drill Head Stroke 18” Spindle Horsepower (4) at 10 HP Each Number of Drill Bases 2 Number of Spindles 4 Feed Rate .1 IPM to 30.0 IPM Rapid Retraction of Drill Head
                  Pines 5T CNC Vertical Tube Bender
                  $RFQ
                  Pines 5T CNC Vertical Tube Bender
                  Pines 5T CNC Vertical Tube Bender S/N: 44362-72391, Stock No: 87358 Model: 5T Remanufactured by PR Machine Capacity: 1-1/4" OD x .065 Wall Max Bending Angle: 140° Min Centerline Radius: 3 Times Tube Diame
                  • Maximum diameter: 1.25"
                    Lemas Roller TR120/5
                    $25,000
                    Lemas Roller TR120/5
                    Lemas Roller, Model TR 120/5. 5', 10 gage machine. This machine is essentially brand new. It was purchased in error and was not what the folks on our shop floor were looking for. 480V 3 phase. Virtually never us
                    • Width: 60"
                    • Thickness: 0.135"
                      Flow Waterjet - Mach 3 w Dynamic Head
                      $38,000
                      Flow Waterjet - Mach 3 w Dynamic Head
                      Flow waterjet, Mach 3 w dynamic head. 480V, 55K PSI, 4'x8'. 2010 model with direct drive, 30HP pump. One owner. Meticulous maintenance with records to back it up. The only issue to disclose is that the abras
                      • Output Pressure: 55000PSI
                      • Motor: 30HP
                        KITAMURA MYCENTER 2XIF
                        $12,950
                        KITAMURA MYCENTER 2XIF
                        FANUC 16iM, 20,000 RPM, PALLET CHANGER, 24 ATC
                        • X axis: 20"
                        • Y axis: 14"
                          6" Manual 3 Jaw Lathe Chuck
                          $250
                          6" Manual 3 Jaw Lathe Chuck
                          6" Manual 3 Jaw Lathe Chuck Year of Mfg: 2013 Chuck Type: Self-Centering Chuck Diameter: 6" Number Of Jaws: 3 Mount Type: Plain Back Body Material: Cast Iron Adjustable: No Number of Jaw Piec
                          2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
                          $93,000
                          2004 Peterson 2400B T/A Horizontal Grinder RTR#4051860-01
                          Equipment located in Salem, OR. 2004 Peterson 2400B Recycler T/A Horizontal Grinder, Cat C15 Diesel Engine, Hyd Transmission, 580 Hp, Feed System, 24 Fixed Hammer, Hour Meter Reads: 113 (Unverified), S/N: 17B-177-842
                          Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                          $250
                          Manual 4" Lathe Chuck - 3 Jaw, Self Centering
                          Manual 4" Lathe Chuck - 3 Jaw, Self Centering Year of Mfg: 2013 *New In Box, 2 Available* Chuck Type Self-Centering Chuck Diameter: 4" / 101.6 mm Number Of Jaws: 3 Mount Type: Plain Back
                          Categories:
                          Condition:
                          Manufacturer:
                          Location:
                          Price:
                          •  to 
                          1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>