buy & sell, new & used machinery, machine tools & equipment

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 141 - 160 of 21150 matches
Sort by:
Items Per Page:  20  |  50 |  100
Mazak Model FH-6000 4-Axis CNC Horizontal Machining Center
$RFQ
Mazak Model FH-6000 4-Axis CNC Horizontal Machining Center
SPECIFICATIONS: Pallet Size 19.7” x 19.7” X-Axis Travel 31.5” Y-Axis Travel 31.5” Z-Axis Travel 31.5” Max. Work Diameter 900 mm Max. Work Height 1,000 mm Max. Work Mass 1,000 kg Table Indexing 360,000 P
2022 Toro Dingo TX1000 Track Loader RTR#4123044-02
$22,500
2022 Toro Dingo TX1000 Track Loader RTR#4123044-02
Unit located in Arden, NC. 2022 Toro Dingo TX1000 Wide Track Loader W/ High Volume Bucket, Kubota D1305 Diesel Engine, Hyd Transmission, 24.9 Hp, Hour Meter Reads: 507 (Unverified), S/N:412804038 All equipment is sold
2022 Toro Dingo TX1000 Track Loader(Non-Drive) RTR#4123044-01
$21,500
2022 Toro Dingo TX1000 Track Loader(Non-Drive) RTR#4123044-01
Unit located in Arden, NC. 2022 Toro Dingo TX1000 Wide Track Loader w/ Standard Bucket (Non-Drive), Kubota D1305 Diesel Engine, Hyd Transmission, 24.9 Hp, Hour Meter Reads: 745 (Unverified), S/N:412803998 All equipment
650°C/1200°F Nabertherm N120/65HA High Temperature Forced Convect
$RFQ
650°C/1200°F Nabertherm N120/65HA High Temperature Forced Convect
650°C/1200°F Nabertherm N120/65HA High Temperature Forced Convection Sintering Furnace with Gas Charging SPECIFICATIONS: Rated Voltage 3 Phase, 60 Cycle, 480 Volt Rated Current 17.9A Total Load 13.6 kW I
Intersource Continuous Chip Processor System
$RFQ
Intersource Continuous Chip Processor System
SPECIFICATIONS: INTERSOURCE HD-60 HYDRAULIC DUMPER Max Capacity 1500 lbs. Motor 2HP INTERSOURCE FR1204 AUGER CONVEYOR Screw Flight 8’ 9 1/2” Motor ½HP Screw Diameter 12” INTERSOURCE M2-2405 CHIP SHRED
Mazak M-5N 2000 CNC Flat Bed Lathe
$RFQ
Mazak M-5N 2000 CNC Flat Bed Lathe
SPECIFICATIONS: Swing over Bed 24” Swing over Cross Slide 13” Distance between Centers 82” Chuck Diameter 18” 3-Jaw Spindle Nose A1-II Spindle Bore 5-1/2” Front Turret 6-Positions Rear Turrret 8-Positions Tailst
SUPERMAX FV102A VMC
$8,950
SUPERMAX FV102A VMC
FANUC 18M, 15 HP, CT-40, 10,000 RPM, 24 ATC
  • X axis: 40"
  • Y axis: 20"
    SUPERMAX FV102A VMC
    $8,950
    SUPERMAX FV102A VMC
    FANUC 18M, 15 HP, CT-40, 10,000 RPM, 24 ATC
    • X axis: 40"
    • Y axis: 20"
      Band Saw 14" CS w/Mob Base
      $999
      Band Saw 14" CS w/Mob Base
      Band Saw 14" CS w/Mob Base Model: 28-206 [Delta] S/N: 300620 14" Closed Stand Band Saw w/Mobile Base, Fence, Riser Block, Carter Bearings 1Hp; 1Ph; 115/230Volt
      Marvel 380A-PC-60 Automatic CNC Vertical Band Saw
      $RFQ
      Marvel 380A-PC-60 Automatic CNC Vertical Band Saw
      Reference #43918 Marvel 380A-PC-60 Automatic CNC Vertical Band Saw FEATURES: Marvel PC3 Programmable Control with 10" Display and Color Touch Screen Tilting Column for Miter Cutting 60 Deg. Left and Right Hyd
      • Height capacity: 20"
        Rush Model FC 500D PCD, Carbide, HSS Tool Grinder
        $RFQ
        Rush Model FC 500D PCD, Carbide, HSS Tool Grinder
        SPECIFICATIONS: Tip Grinding Radii 0 to 8mm (.0315”) Round Tool Shank Diameters 3mm (0.118”) to 26mm (1.02”) Grinding Spindle Speed (RPM) 0 to 3600 Power 3HP Height Adjustment 130mm (5.12”) Grinding Wheel Oscil
        GILDEMEISTER GS-20 SWISS TYPE CNC SCREW MACHINE
        $39,500
        GILDEMEISTER GS-20 SWISS TYPE CNC SCREW MACHINE
        6 SPINDLE, 20MM, ALLEN BRADLEY CONTROL, BAR FEED
        11.8” x 13.3” Tschudin HTG310 Universal Cylindrical Grinder
        $RFQ
        11.8” x 13.3” Tschudin HTG310 Universal Cylindrical Grinder
        SPECIFICATIONS: Grinding Diameter 11.8” Grinding Length 13.38” Center Height 5.9” Workhead Spindle Taper MORSE 5 Workhead Swivel Range 360° Spindle Speed Range (Stepless) 50-500 RPM Tailstock Barrel Taper MOR
        2022 iDry Plus Air-Heated Vacuum Wood Kiln RTR#4103594-01
        $50,000
        2022 iDry Plus Air-Heated Vacuum Wood Kiln RTR#4103594-01
        Equipment located in O’Fallon, MO. 2022 iDry Plus Air-Heated Vacuum Wood Kiln, 4000 Board ft. Capacity, S/N: 0136-22-ER All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspecte
        2008 Generac 500 KW Diesel Generator RTR#4103602-01
        $35,000
        2008 Generac 500 KW Diesel Generator RTR#4103602-01
        Unit located in Big Spring, TX. 2008 Generac 500 KW Diesel Generator, 227/ 480v, 3 Phase, Hours Meter Reads: Unknown (Unverified), Model: SD0500-K36160D18GPYL; S/N: 2097535 All equipment is sold “As Is, Where Is”. Rea
        2019 HAAS ST-50
        $RFQ
        2019 HAAS ST-50
        Low Hours. 8.5" Bore, Gearbox, Back Chuck, 80" Between Centers, Tailstock, Chip Conveyor. This underutilized heavy duty 2019 Haas ST-50 large bore high torque 2-axis cnc lathe is under power and ready to insp
        • Swing: 34.5"
        • Centers: 80"
          2024 HAAS VF-1
          $RFQ
          2024 HAAS VF-1
          Experience precision with the 2024 HAAS VF-1 Vertical Machining Center. Featuring a 26" x 14" table, 20" x 16" x 20" travel, 8,100 RPM spindle, and 30 hp motor. Equipped with probing system, tool
          • X axis: 20"
          • Y axis: 16"
            2015 HAAS UMC-750SS
            $RFQ
            2015 HAAS UMC-750SS
            5-Axis, 15,000 RPM, Through Spindle Coolant, Probe, 40 ATC. This single shift 2015 Haas UMC-750SS cnc vertical machining center also includes Programmable Coolant, High Speed Machining, Axillary Coolant Filter, and Chi
            2013 Cat 320E L Crawler Excavator RTR#5013953-01
            $65,000
            2013 Cat 320E L Crawler Excavator RTR#5013953-01
            Unit located in Port Angeles, WA. 2013 Cat 320E L Crawler Excavator w/Grapple and (2) Buckets; Cat C6.6 Diesel Engine, Hyd Transmission, Enclosed Cab, Air Ride Seat, ROPS, A/C, Heater, AM/FM Radio, Hour Meter Reads: 6,7
            Chevalier 12"x 24" Automatic Surface Grinder RTR#4113728-02
            $4,000
            Chevalier 12"x 24" Automatic Surface Grinder RTR#4113728-02
            Equipment located in San Antonio, TX. Chevalier 12"x 24" Model FSG-1224AD Automatic Surface Grinder S/N: F1875005 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be insp
            Categories:
            Condition:
            Manufacturer:
            Location:
            Price:
            •  to 
            1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>