buy & sell, new & used machinery, machine tools & equipment

<Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>
Refine: Viewing 501 - 520 of 21137 matches
Sort by:
Items Per Page:  20  |  50 |  100
2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
$7,000
2021 Maripak L-Bar Sealer & Heat Tunnel RTR#4073346-01
Equipment located in Raleigh, NC. 2021 Maripak - LMC Series Semi-Automatic - L-Bar Sealer Model: 80/65 v2, 220v, S/N: 17600, With 2021 Maripak T60-1400 H400 Diamond Heat Tunnel, 220v, S/N: 17299 All equipment is sold “
2018 Vermeer AX19 Trailer Mounted Brush Chipper RTR#4083724-01
$72,000
2018 Vermeer AX19 Trailer Mounted Brush Chipper RTR#4083724-01
Equipment located in Thomaston, GA. 2018 Vermeer AX19 Trailer Mounted Brush Chipper, T/A, John Deere 4045HFC09 Diesel Engine, 173 Hp, Pintle Hitch, Electrical Brakes, Hour Meter Reads:1,287 (Unverified, S/N: 1VRL19252J1
PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
$37,995
PRIMELINE M1010 10ft x 10ga. Electro-Mechanical Power Shear
CALL 386-304-3720 FOR AVAILABILITY IN STOCK NOW! FEATURES: Mechanical Power Squaring Shear with Manual Front-Operated Backgauge, Pneumatic Sheet Support Device with Front Return and Material Cart Go-To
Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
$RFQ
Grob G552 CNC Horizontal Machining System (3) Machines, Fanuc Robots, 12K RPM, HSK-63, 120
CNC Control yes Type of CNC Control Siem
Matsuura MAM72-70V PC-6 CNC 5-axis Machining Center, New 2021, Tbl. 19.68 x 19.68, 20k Rpm
$RFQ
Matsuura MAM72-70V PC-6 CNC 5-axis Machining Center, New 2021, Tbl. 19.68 x 19.68, 20k Rpm
CNC Control yes Type of CNC Control MATS
POREBA TCG-160-10M Lathe
$109,000
POREBA TCG-160-10M Lathe
Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
  • Swing: 90"
    POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
    $RFQ
    POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
    DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT
    WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
    $RFQ
    WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
    AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU
    • Chamber width: 96"
    • Chamber length: 96"
      ACE BURN OFF OVEN 36"W 36"L 47"H
      $RFQ
      ACE BURN OFF OVEN 36"W 36"L 47"H
      ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
      GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
      $RFQ
      GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
      UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
      • Chamber width: 120"
      • Chamber length: 264"
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        $RFQ
        HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
        ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION
        DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
        $RFQ
        DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
        DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
        • Chamber width: 72"
        • Chamber length: 120"
          DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
          $RFQ
          DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
          DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE
          • Chamber width: 47"
          • Chamber length: 30"
            Mazak Integrex i-400S CNC Mill Turn, 15" 3-jaw chks, 26" swng. 59
            $RFQ
            Mazak Integrex i-400S CNC Mill Turn, 15" 3-jaw chks, 26" swng. 59
            MAZAK INTEGREX I-400S CNC MILL TURN Model Integrex i-400S, New 2013 Stock # Q11971 EQUIPPED WITH: Mazak Mazatrol Matrix 2 CNC Control, Full 5-Axis Machining Capability, (2) Kitagawa 15" 3-Jaw Chucks on Main &a
            • Swing: 25.91"
            • Centers: 59.8"
              Budgit 3 Ton Electric Chain Hoist
              $RFQ
              Budgit 3 Ton Electric Chain Hoist
              Budgit 3 Ton Electric Chain Hoist S/N: 198573, Stock No: 020073 Model: 113458-13 Capacity: 3 Ton Lift: 10’ Pushbutton Pendant Manual Trolly Electrics: 240/480V (Currently Wired 240V), 3 Phase
              • Lifting capacity: 3T
              • Lift height: 10'
                Durmazlar CNC HAP 2060 S Press Brake
                $19,000
                Durmazlar CNC HAP 2060 S Press Brake
                Type: Hydraulic Capacity: 60ton Bed length: 6' 8" Between housings: 5' 6" Stroke: 10" Depth of Throat: 16" HP: 10 Weight: 11,244lbs Dimensions: 100" x 180" x 110"
                2007 Daewoo Lynx 200 2-Axis CNC Lathe
                $RFQ
                2007 Daewoo Lynx 200 2-Axis CNC Lathe
                2007 Daewoo Lynx 200 2-Axis CNC Lathe SPECIFICATIONS: SWING 18.11" CHUCK SIZE 8" BAR CAPACITY 1.5" POWER 10 hp MAX RPM 5,000 RPM TURNING DIA 11.02" TAILSTOCK
                CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                $RFQ
                CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998
                CHIRON FZ-12W HIGH SPEED CNC VERTICAL MACHINING CENTER 1998 2 Machines Available…. S/N 469-94 GE Fanuc 21M Control Specifications Axis X 550 mm Axis Y 300 mm Axis Z 425 mm Rotary table (4th axis) n
                Allis-Chalmers 7500 Pound Forklift
                $RFQ
                Allis-Chalmers 7500 Pound Forklift
                Allis Chalmers 7500 Pound Forklift ***EXCELLENT CONDITION*** Rebuilt Tilt Cylinders New Brakes Hydraulics Serviced Many Seals Have Been Replaced No Leaks Runs Excellent.
                • Lifting capacity: 7500T
                  HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                  $RFQ
                  HIGH SPEED CELL LINES FOR D SIZE (R20) & AA SIZE (R6) BATTERIES (14379)
                  HIGH SPEED CELL LINESStock # 14379High Speed Cell Lines &ndash; overviewThe High Speed Celll Lines (HSCL) consist of two production lines. These production lines were designed to manufacture Zinc Chloride cellsin the
                  Categories:
                  Condition:
                  Manufacturer:
                  Location:
                  Price:
                  •  to 
                  <Prev | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Next>