buy & sell, new & used machinery, machine tools & equipment

<Prev | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 | 201 | 202 | Next>
Refine: Viewing 4001 - 4020 of 21143 matches
Sort by:
Items Per Page:  20  |  50 |  100
Clutch Assembly for Amada M-Series Shear *NEW*
$1,750
Clutch Assembly for Amada M-Series Shear *NEW*
Brand new clutch assembly for Amada M-Series Shear. Never used.
Wilton Model 5216001 Radial Arm Drill
$9,950
Wilton Model 5216001 Radial Arm Drill
Spindle Speed 40 to 1920 RPM Spindle Travel 14 9/16" Spindle Taper #5 MT Spindle Feeds .002 to 0.040 IPR Column Diameter 17" Drilling Capacity Steel - 2 1/2", Cast Iron - 2 7/8" Tapping Capacity
  • Arm length: 4'
  • Column diameter: 17"
    Jointer 6" 1hp Mbl Bs Dlta/Rck
    $799
    Jointer 6" 1hp Mbl Bs Dlta/Rck
    Jointer 6" 1hp Mbl Bs Dlta/Rck Model: 37-220 [Delta/Rockwell] S/N: DI6283 6" Jointer w/Mobile Base 1Hp; 1Ph; 120Volt
    Cab Saw 10 2/1 LT w/Incra LS
    $1,799
    Cab Saw 10 2/1 LT w/Incra LS
    Cab Saw 10 2/1 LT w/Incra LS Model: 50-220 [General International] S/N: 52264805 10" Left Tilt w/Incra LS Positioner Fence 2Hp; 1Ph; 110/220Volt
    3000 LB X 15" ROWE COIL CRADLE
    $RFQ
    3000 LB X 15" ROWE COIL CRADLE
    order 3000 3000 LB MAC COIL WEIGHT&nbsp;15" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
    4000 LB X 18" FEED LEASE COIL CRADLE
    $RFQ
    4000 LB X 18" FEED LEASE COIL CRADLE
    ORDER 4000 18" MAX WIDTH&nbsp;48" ODFORWARD&nbsp;REVERSEMANUAL COIL GUIDE ADJU
    3000 LB X 20" ROWE COIL CRADLE
    $RFQ
    3000 LB X 20" ROWE COIL CRADLE
    order 3000 3000 LB MAC COIL WEIGHT&nbsp;20" MAX WIDTH48" ODMANUAL COIL GUIDE ADJUS
    Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
    $RFQ
    Hardinge GX 1600 Vert Mach Cntr, 67" x 27.6" tbl, XYZ=63/27.5/25&
    HARDINGE BRIDGEPORT GX 1600 CNC VERTICAL MACHINING CENTER Model GX 1600, S/N GXEB2D0008, New 2012 Stock # Q11748 EQUIPPED WITH: Fanuc 0i-MD CNC Control, (2) Chillers, Chip Conveyor & Coolant System. SPECIFIC
    • X axis: 62.99"
    • Y axis: 27.55"
      Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
      $RFQ
      Mitsubishi MD+PRO II CNC Wire EDM, Model BA8, 31" x23" x18.5&
      MITSUBISHI MD+PRO II CNC WIRE EDM Model BA8, S/N 57DB8095, New 2007 Stock # Q11773 EQUIPPED WITH: Mitsubishi V350 CNC Control (PC Based), Automatic Wire Threading, Submerged Machining, Linear Guide Ways. SPECIFI
      • X axis travel: 12.6"
      • Y axis travel: 9.8"
        INDUSTRIAL 450 F GAS FIRED WALK IN OVEN, 114"W 125"L 78"H
        $RFQ
        INDUSTRIAL 450 F GAS FIRED WALK IN OVEN, 114"W 125"L 78"H
        DOUBLE DOOR OPENING WITH PRESSURE LATCHES AT BOTH FRONT AND REAR. HEAT IS SUPPLIED BY A MAXON OVENPAK BURNER (800,000 BTU/HR MAX) FIRING INTO A PROTECT AREA ABOVE WORK CHAMBER. INTERIOR HAS A STEEL PLATE FLOOR. HEATED A
        • Chamber width: 114"
        • Chamber length: 125"
          GRIEVE GAS WALK IN 4'W 4'L 6'H SOLVENT RATED
          $RFQ
          GRIEVE GAS WALK IN 4'W 4'L 6'H SOLVENT RATED
          DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES, STAINELSS STEEL. INTERIOR WITH INSULATED FLOOR AND CART TRACKS. HEATED AIR IS CIRCULATED HORIZONTALLY. OVEN HAS A SOLVENT RATING OF 5.38 GALLONS PER BATCH OF ALCOHOL @ 19
          • Chamber width: 48"
          • Chamber length: 48"
            JACKSON BURN OFF OVEN, 7'W 13'L 7'H
            $RFQ
            JACKSON BURN OFF OVEN, 7'W 13'L 7'H
            DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND PRESSURE RELIEF PANELS IN ROOF. INTERIOR WALLS ROOF AND DOORS ARE LINED WITH LIGHT WEIGHT FIBER REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY WITH CART TRACKS. PRIMARY H
            ABAR HR50X48 VACUUM FURNACE 36"W 48"L 30"H
            $RFQ
            ABAR HR50X48 VACUUM FURNACE 36"W 48"L 30"H
            HORIZONTAL LOADED DOUBLE WALL WATER COOLED SHELL WITH SIDE SWING CLAMPING DOOR. GRAPHITE HOT ZONE AND HEATING ELEMENTS. HEARTH HAS A 2500 LBS LOAD CAPACITY. PUMPING SYSTEM INCLUDES 20"DIFFUSION PUMP. POWER TO HEATI
            • Chamber width: 36"
            • Chamber length: 48"
              INDUCTOTHERM 50 KW INDUCTION MELTER
              $RFQ
              INDUCTOTHERM 50 KW INDUCTION MELTER
              100 POUND TILT (HOIST REQUIRED) FURNACE. POWER SUPPLY RATED 50 KW @ 3200 HZ. PREVIOUSLY USED IN TESTING LAB. PURCHASED NEW 2005 AND USED IN A LAB UNTIL 2010. SHIP FROM PENNSYLVANIA
              GRUENBERG 1000 F ELEC. WALK IN OVEN 7'W 12'L 5'H
              $RFQ
              GRUENBERG 1000 F ELEC. WALK IN OVEN 7'W 12'L 5'H
              DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATED AIR IS CIRCULATED HORIZONTALLY BY (4) BELT DRIVEN FANS IN THE ROOF. INTERIOR HAS AN INSULATED FLOOR. AT END OF HEAT CYCLE OVEN CAN BE COOLED BY (2) ROOF MOUNTED PRES
              • Chamber width: 84"
              • Chamber length: 144"
                Makino T1 5-Axis CNC HMC (2 machines available), 2017 Excellent Condition
                $RFQ
                Makino T1 5-Axis CNC HMC (2 machines available), 2017 Excellent Condition
                MAKINO T1 5 AXIS HMC (2 machines available) Model: T1 Stock #: 20215-IS Serial No.: 38 Year: Installed 2017 Specifications: Pallet Size 39.4" x 39.4", 1,000 mm x 1,000 mm Maximum Part Ca
                • X axis: 59.1"
                • Y axis: 51.2"
                  Makino T1 5-Axis CNC HMC (2 machines available), 2017 Excellent Condition
                  $RFQ
                  Makino T1 5-Axis CNC HMC (2 machines available), 2017 Excellent Condition
                  MAKINO T1 5 AXIS HMC (2 machines available) Model: T1 Stock #: 20214-IS Serial No.: 35 Year: Installed 2017 Specifications: Pallet Size 39.4" x 39.4", 1,000 mm x 1,000 mm Maximum Part Capacity 59&quo
                  • X axis: 59.1"
                  • Y axis: 51.2"
                    SUPERMAX MAX-1 REBEL VMC
                    $7,950
                    SUPERMAX MAX-1 REBEL VMC
                    15 HP, FANUC OM, 16 ATC, CAT-40 TOOLING
                    • X axis: 25.5"
                    • Y axis: 15.5"
                      SUPERMAX YCM-TC-26 TURNING CENTER
                      $7,950
                      SUPERMAX YCM-TC-26 TURNING CENTER
                      TAILSTOCK, FANUC CONTROL, LOTS OF TOOLING, UNDER POWER & RUNNING
                      • Swing: 18.5"
                      • Centers: 25.5"
                        1987 - 1/4" x 13' Amada M-4045 Mechanical Squaring Shear
                        $RFQ
                        1987 - 1/4" x 13' Amada M-4045 Mechanical Squaring Shear
                        Overall Cutting Length 156" Maximum Cutting Capacity 3/16" Speed 50 SPM Blade Length 174" Back Gauge Range 40" Rake Angle 1 Degree/ 18' Main Motor 14.5 HP Overall Dimensions 16' x6'
                        Categories:
                        Condition:
                        Manufacturer:
                        Location:
                        Price:
                        •  to 
                        <Prev | 193 | 194 | 195 | 196 | 197 | 198 | 199 | 200 | 201 | 202 | Next>