buy & sell, new & used machinery, machine tools & equipment

<Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>
Refine: Viewing 181 - 200 of 21445 matches
Sort by:
Items Per Page:  20  |  50 |  100
WILT BOTTOM LOAD 2000 F ELECTRIC FURNACE 60"W 24"L 19"H
$RFQ
WILT BOTTOM LOAD 2000 F ELECTRIC FURNACE 60"W 24"L 19"H
ELECTRICALLY HEATED BOTTOM LOAD FURNACE WITH COIL TYPE HEATING ELEMENTS AND LIGHT WEIGHT REFRACTORY WALLS AND ROOF IS LIFTED ELECTRICALLY (WITH COUNTER WEIGHT ASSISTANCE) FROM THE BRICK LINED BASE.
  • Chamber width: 60"
  • Chamber length: 24"
    STEELMAN 500 F GAS FIRED WALK IN OVEN 7'W 7'L 7'H
    $RFQ
    STEELMAN 500 F GAS FIRED WALK IN OVEN 7'W 7'L 7'H
    DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT (350, 000 BTU/HR MAX) IS SUPPLIED BY A GAS FIRED PACKAGE BURNER FIRING INTO A REAR MOUNTED COMBUSTION CHAMBER. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE W
    • Chamber width: 84"
    • Chamber length: 84"
      POREBA TCG-160-10M Lathe
      $109,000
      POREBA TCG-160-10M Lathe
      Swing over bed: 90" Between centers: 32' Spindle bore: 4" Threads: Std Tailstock spindle taper: Yes Chuck: 5' Dimensions: 94" x 600" x 102"
      • Swing: 90"
        POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
        $RFQ
        POLLUTION CONTROL BURN OFF OVEN 72"W 74"L 75"H
        DOUBLE DOOR OPENING WITH PRESSURE RELIEF ROOF PANEL. PRIMARY HEAT AND AFTER BURNER HEAT ARE SUPPLIED BY PACKAGE BURNERS FIRING INTO HEAT TUBES IN REAR OF WORK CHAMBER. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT
        WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
        $RFQ
        WISCONSIN 1050 F ELECTRIC OVEN 8'W 8'L 5'H
        AIR OPERATED VERTICAL LIFT FRONT DOOR. CIRCULATING FAN (15 HP, 15,000 CFM) AND HEATING ELEMENTS ARE MOUNTED IN A PROTECTED CHAMBER ABOVE WORK AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON SIDE AND REAR WALLS RETU
        • Chamber width: 96"
        • Chamber length: 96"
          EGLOFF & GRAPER ARGON ATMOSOHERE CONVEYOR FURNACE FOR 6" BILLETS
          $RFQ
          EGLOFF & GRAPER ARGON ATMOSOHERE CONVEYOR FURNACE FOR 6" BILLETS
          ELECTRICALLY HEATED ATMOSPHERE CONVEYOR FURNACE DESIGNED TO HEAT 6"DIA X 12"LONG MAGNESIUM/ALUMINUM BILLETS PRIOR TO FORGING UNDER ARGON ATMOSPHERE. BILLETS ARE LOADED AND UNLOADED FROM THE TOP BY A SLIDING DO
          • Chamber width: 18"
          • Chamber length: 175"
            ACE BURN OFF OVEN 36"W 36"L 47"H
            $RFQ
            ACE BURN OFF OVEN 36"W 36"L 47"H
            ARE LINED WITH LIGHT WEIGHT REFRACTORY COVERED BY EXPANDED METAL. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTERBURNER HEAT IS SUPPLIED BY (2) PACKAGE BURNERS FIRING FROM THE RIGHT SIDE INTO THE
            LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
            $RFQ
            LINDBERG 1000 F BATCH DRAW OVEN GAS FIRED 6'W 6'L 6'H
            DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AND STEEL PLATE FLOOR. HEAT (1,200,000 BTU/HR MAX.) IS SUPPLIED BY GAS FIRED PACKAGE BURNER FIRING INTO ROOF MOUNTED COMBUSTION CHAMBER, HEATED AIR ENTERS WORK AREA VIA
            • Chamber width: 72"
            • Chamber length: 72"
              GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
              $RFQ
              GLOBAL FINISHING UNUSED 500 F WALK IN OVEN 10'W 22'L 9'H
              UNUSED CLASS A OVEN MANUFACTURED IN 2021, NEVER INSTALLED. DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES AT BOTH FRONT AND REAR. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS BURNER (2,000,000 BTU/HR MAX) AND 10
              • Chamber width: 120"
              • Chamber length: 264"
                POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
                $RFQ
                POLLUTION CONTROL VPI 88 BURN OFF OVEN 48"W 52"L 60"H
                SINGLE SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. HEAT FOR THE WORK CHAMBER AND AFTERBURNER IS SUPPLIED BY A PACKAGE BURNER FOR EACH CHAMBER (390,000 BTU/HR. MAX TOTAL). INNER WALLS, ROO
                GLOBAL FINISHING 500 F WALK IN OVEN, 8'W 8'L 8'H GAS FIRED
                $RFQ
                GLOBAL FINISHING 500 F WALK IN OVEN, 8'W 8'L 8'H GAS FIRED
                DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER WITH GAS PACKAGE BURNER AND BELT DRIVEN CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURN T
                • Chamber width: 96"
                • Chamber length: 96"
                  HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
                  $RFQ
                  HURRICANE SYSTEMS (MIDBROOK) 24"W BELT WASHER
                  ALL STAINLESS STEEL CONSTRUCTION WITH 24"WIDE VARIABLE SPEED FLAT WIRE BELT. PARTS ARE LOADED ON BELT IN THE OPEN LOAD AREA TRAVEL THROUGH APPROX 3' WASH, 2' TRANSITION ZONE, 2' RINSE, 2' TRANSITION
                  STEELMAN 500 F WALK IN OVEN 3'W 3'L 3'H
                  $RFQ
                  STEELMAN 500 F WALK IN OVEN 3'W 3'L 3'H
                  DOUBLE DOOR OPENING WITH PRESSURE LATCH AND STEEL PLATE FLOOR. HEAT IS SUPPLIED BY MAXON GAS BURNER FIRING INTO REAR MOUNT COMBUSTION CHAMBER WITH CIRCULATING FAN. ROOF MOUNTED POWER EXHAUST IS INCLUDED. MANUFACTURED 2
                  • Chamber width: 36"
                  • Chamber length: 36"
                    DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
                    $RFQ
                    DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
                    DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
                    • Chamber width: 72"
                    • Chamber length: 120"
                      DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
                      $RFQ
                      DESPATCH 500 F GAS WALK IN OVEN 6'W 10' 6.5'H
                      DOUBLE DOOR OPENING WITH VIEWING WINDOW AT BOTH FRONT AND REAR. HEAT (500,000 BTU) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN FAN, ENTER
                      • Chamber width: 72"
                      • Chamber length: 120"
                        DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
                        $RFQ
                        DESPATCH 1000 F ELEC. OVEN 47"W 30"L 42"H
                        DOUBLE DOOR OPENING WITH POSITIVE LATCHING AND STAINLESS STEEL INTERIOR. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK AREA IN A PROTECTED CHAMBER. HEATED AIR IS CIRCULATED HORIZONTALLY. (14) SHELVES ARE
                        • Chamber width: 47"
                        • Chamber length: 30"
                          STUDER S 141 CNC INTERNAL GRINDERS NEW: 2023 | AG 86134
                          $RFQ
                          STUDER S 141 CNC INTERNAL GRINDERS NEW: 2023 | AG 86134
                          SPECS: INTERNAL DIAMETER: 140 MM GRINDING DEPTH: 250 MM SWING DIAMETER: 400 MM GRINDING LENGTH:
                          POLLUTION CONTROL PRC 111 54"W 54"L 66"H
                          $RFQ
                          POLLUTION CONTROL PRC 111 54"W 54"L 66"H
                          SIDE SWING DOOR WITH POSITIVE LATCHING AND GRAVITY SEALED TOP RELIEF PANEL. INTERIOR WALLS, ROOF AND DOORS ARE LINED WITH LIGHT WEIGHT REFRACTORY. FLOOR IS A POURED CASTABLE REFRACTORY. HEAT FOR PRIMARY HEAT AND AFTER B
                          Grieve 36"W x 36"H x 36", 400F Cabinet Oven model 333
                          $RFQ
                          Grieve 36"W x 36"H x 36", 400F Cabinet Oven model 333
                          Bench type cabinet oven, Grieve model 333, 36" x 36" x 36" work area, stainless steel interior, horizontal/vertical air-flow, 230V single phase, 6.6KW, solid state indicating controls, (3) shelves, operati
                          • Chamber width: 36"
                          • Chamber length: 36"
                            OKUMA GENOS L2000-e CNC LATHE NEW: 2020 | JS 86133
                            $RFQ
                            OKUMA GENOS L2000-e CNC LATHE NEW: 2020 | JS 86133
                            SPECS: X-TRAVEL: 6.50" Z-TRAVEL: 18.50" DISTANCE BETWEEN CENTERS: 20" MAX SWING OVER BED: 17.72" MAX TURNING / CUTTING LENGTH: 19.69" MAX CUTTING / TURNING DIAMETER: 9.06" SPINDLE- B
                            • Swing: 17.72"
                            • Centers: 19.69"
                              Categories:
                              Condition:
                              Manufacturer:
                              Location:
                              Price:
                              •  to 
                              <Prev | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next>