CL-400 Series CO2 Laser Cutting System Details
The productivity comes from overcoming the limitations inherent to conventional lasers. Straight line cutting speed is maximized using a resonator with 4000 watts of CW power, beam enhancement optics and 400 PSI assist gas capabilities. The motion system provides high accelerations and accuracies through the use of linear motors, linear encoders and advanced aerospace composite construction. Maximum positioning speed of the cutting head is 12,020 inches per minute. Dual pallets permit the operator to simultaneously unload parts and load new material on one pallet while the laser is cutting on the other pallet. The conveniently located control, with 15” color LCD touch screen display and full sized standard keyboard, provides the operator with a user-friendly Human Machine Interface (HMI) with nesting software. Dynamic Power Control (DPC) automatically maintains the proper relationship between laser power and the instantaneous feed rate, which is critical for high part accuracy and quality edge condition. The Autofocus laser cutting head automatically adjusts the focus to .001”. A self-aligning lens holder, nozzle tip assembly and laser head construction permits the processing of different materials with minimal set up.
Get the Best Deal on this High Efficiency Low Operating Cost Laser |
► High Accuracy ► Fast - 12,020 IPM Gen #4 Linear Motor Drives ► Lower Operational Cost/Hour & greatly reduced PM cycles ► No external electrical cabinets ► Serviced by CINCINNATI local service |
|
CL-440 Series CO2 Laser Cutting System - 4KW CO2
- Programming/Nesting Software included
- Training included
- 2-Year Parts and Labor Warranty
Standard 5x10 Model |
Q2 2016 SPECIALS | 5x10 Single Pallet | 5x10 Dual Pallet | Note: If a Torit Filter is required: additional $23,000 |
|
|
| Seller Details |
| |
| Business: Sterling Machinery Exchange |
| |
| Contact: |
| |
| Address: |
| |
| Phone: 626-444-0311 |
| |
| Email: adam@sterlingmachinery.com |
|
| |
| |
|
|
|