NEW Sharp Model: SV-2414 A-F Mini Mill
High Precision Box Way Vertical Machining Center
Standard Machine Specifications
Work Capacity
X axis travel: 610mm (24” )
Y axis travel: 355mm (14” )
Z axis travel: 460mm ( 18” )
Spindle nose to table: 70 - 530mm (2.8” – 20.9” )
Spindle center to column: 415mm ( 16.3” )
Worktable
Table area: 700 x 350mm ( 27.6” x 13.8” )
Max. work piece weight: 350kg ( 770 lbs.)
T-Slot (Number x Width x Pitch): 5x16x63.5(5x0.63x2.5)
Spindle
Spindle taper: Big Plus, CAT-40
Spindle speed: rpm 8,000
Spindle motor: cont. / 15 min: kw (hp) 7.5 /11 ( 10/15 )
Torque: Nm( ft/lb) 70(52) at 1500 rpm
Transmission: Belt Drive
Automatic Tool Changer
ATC type: Carousel
Tool capacity: 16
Max. Tool diameter: 93mm (3.7”)
Without adjacent tool: 150mm (5.9")
Max. Tool length: 300mm (11.8")
Max. Tool weight: 7kg ( 15.4 lbs)
Tool change time (tool to tool): 6.8 sec
Tool change time (chip to chip): 8 sec
Method of tool selection: Set tool Number
Motion
Rapid traverse: (mm/min (ipm)) X / Y/Z:20,000(787.4 ipm)Z:18,000 (708.7 ipm)
Cutting feed rate: (mm/min (ipm)) 1-10,000 (0.04–393 in / min )
Transmission: Direct drive
Positioning accuracy*: (mm (inch)) +/- 0.007 ( 0.0003” )
Repeatability accuracy*:(mm (inch)) +/- 0.003 ( 0.0001” )
Ballscrew diameter, pitch: (mm (inch)) 32(1.26"),10(0.4")
X/Y/Z servo motor for Fanuc control: Kw( HP)1.2/1.2/1.8 (1.6/1.6/2.4)
Coolant System
Coolant tank capacity: L (gal) 160 ( 42 gal )
Number of Coolant Nozzles: 8
Machine Size
Floor space (w/o chip conveyor: W: 1850mm (72.8” ) x D: 1825mm (71.9”)
Height**: 2400mm (94.5"))
Weight: 2500kg (5500 lbs.)
Door opening: 740mm (29.2”)
Power Requirements
Electrical: 60 Hz 220 V / 3 Phase / 20 KVA
Air: 6 CFM @ 88 psi
* Proper foundation and environmental controls are required
** Overall height can be reduced to fit through most door opening by removing the “Z” axis motor.
Standard Accessories
Box Way Construction
CNC Control: Fanuc 0i-MF ( package 3)
Spindle:
- CAT-40 taper
- 8,000 rpm
- Rigid tapping
- Air blow (for cutting dry)
- Air curtain (protect bearings)
Automatic Tool Changer:
- 16 tools, carousel style
- Air blast at tool change
Coolant System:
- 42 gallon roll out coolant tank
- Flood coolant system
- Auto-Lubrication System with Alarm
- Coolant gun
- Air gun
- Pull-out style Chip Pan
- Heat Exchanger for Electric Cabinet
- Fluorescent Work Light
- Air Reservoir Tank with Alarm
- 3 Tier Status Light
- Full metal enclosure with 2 large side doors
- Tool kit
- Leveling bolts and pads
FOR MORE INFORMATION: Call Terry at 973-497-7612