HAAS VF-2 VERTICAL MACHINING CENTER 4TH AXIS READY

Make: Haas
Model No.: VF-2
Serial No.: 12115
Year of Manufacture: 1997
Condition: Very Good

All specifications are approximations, and are subject to verification.

“This Machine was cutting Aluminium only. Equipped with Gear head 7500rpm Spindle, 4th Axis Ready. On our Floor now, fully powered / tested & is in Great working condition.”
-------------------------------------------------------

HAAS VF-2 VERTICAL MACHINING CENTER Features:

20HP High Torque Gear Head Spindle
2 Speed Gearbox
4th Axis Ready ( drives and wiring installed )
Rigid Tapping
Power Failure Detection Module
User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
Brushless servo drive motors on all axis
20 + 1 automatic tool changer
Programmable coolant
Telescopic way covers
Chip auger
Floppy Drive
Flood Coolant system
RS-232 Port
------------------------------------------------

HAAS VF-2 VERTICAL MACHINING CENTER Specifications:

Travels:
X-Axis: 30"
Y-Axis: 16"
Z-Axis: 20"
Rapid Traverse Rates: 710 Inch Per Minute
Cutting Feed Rates: 500 Inch Per Minute
Spindle Nose to Table (Min.- Max.): 4" - 24"

Table:
Length: 36"
Width: 14"
Number of Std T-Slots: 3
T-Slot Width: 5/8"
Max Weight on Table: 1500 lbs

Spindle:
Taper Size:  40
Speed Range: 0 - 7500 RPM
Spindle Power: 20 HP Vector Dual Drive
Max Torque: 90ft-lb @ 2000 RPM

Automatic Tool Changer:
Capacity: 20 + 1
Max Tool Weight: 12 lbs
Max Tool Dia: 3.6"
Max Tool Length: 13"
Tool Changing Time: 3.2 Seconds

General:
Air Required: 100 psi, 4 scfm
Power: 220v / 66FLA / 3-Phase
Overall Dimensions: 90" x 88" x 100" High
Weight: 7500 lbs

HAAS VF-2 VERTICAL MACHINING CENTER Comes as shown in pictures..

This machine is listed for sale by MachineStation located in Chino, California