9” National Heavy Duty Upsetter Re:24440 |
|
Stock Code: |
24440 |
Price: | $RFQ |
Subcategory: | Upsetters |
Maximum diameter: | 9" |
Year of Manufacture: |
1948 (estimated) |
Manufacturer: |
National |
Model: |
9FM |
Condition: | Used |
Forging tonnage rating 2,250 tons
Gripping tonnage rating 1,125 tons
Strokes per minute 25 spm
Bar diameter rating 9.0”
Ram stroke 26.0”
Grip opening 11.0”
Gather 15.0”
Hold 5.5”
Crank pin diameter of main shaft 22.0”
Length of main shaft bearings:
long 25.5”
short 24.0”
Distance face of wedge to face plate heading slide forward 70.0”
Die space dims:
length 32.0”
height 52.0”
Thickness of each die 13.1”
Main motor power 250.0 hp
Floor space:
length 22.0 ft
width 20.0 ft
Net weight 535,000.0 lbs
Complete with:
• Heat-treated high-tensile alloy steel bedframe with heavy horizontal & vertical bedframe ribs provide maximum overall strength and rigidity
• Tie bars and massive bedframe sections support heavy forging loads providing accurate forgings with very little flash
• Long over-arm heading slide allows the cross tie section to be massive and located directly under the front bearing section of the heading slide adding bedframe rigidity in the vital die box area
• Solid stepped design pitman provides a large bearing area on the forward stroke, materially reducing bending and shear stresses as well as bearing loads on the wrist pin and pitman, contributing to the normally long life of these important parts
• Chrome-nickel-moly forged crankshaft
• Air clutch & Brake
Available for inspection at our Cleveland, Ohio facility.
This machine is listed for sale by TrueForge Global Machinery Corp.
located in Rockville Centre, New York