Working Surface of Table

10" x 42"

Overall Size of Table

16" x 48"

Spindle Nose Separation (Min / Max)

4" / 24"

Height of Spindle Center Above Table (Min / Max)

4.5" / 16.5"

Maximum Longitudinal Offset of Heads

12 inches

Maximum Cutting Stroke

37 inches

Taper in Spindle

No.50 NST

Spindle Hole Diameter

1 inches

Spindle Speed Range

100 - 1740 RPM

Table Feed, Infinitely Variable

0 - 480 RPM

Saddle Traverse (Maximum)

3 inches

Saddle Traverse Rate

0 - 60 IPM

Vertical Travel of Knee (Programmable)

4.625 inches

Knee Traverse Rate

0 - 60 IPM

Knee Travel Rate

12"

Approximate Weight

11000 pounds

.

** Subject to Verification **


Allen Bradley MicroLogix PLC Controls with Panelview 700 Color HMI Programmable Servo Control of Table Feed. (2) Knee Feed Cross Slide (Y) Axis feed of RH Knee. LH and RH Spindle Speeds. Lubrication System.  Currently configured with Position Loader/Unloader with Pneumatic Work Fixtures. Twin Auger Chip Conveyors. Spindle Extension. Full work Enclosure. Motor Driven with (2) 10 HP, 1200 RPM, 3 phase, 60 cycle AC Servo VFD Spindle Drive motors and controls. 1.3 HP DC Table Feed. AC Servo Elevating Motors. AC Servo Saddle Feed Servo Drive Motor. This machine is offered cleaned, cycled and guaranteed with a 30 day return privilege.   It can be inspected under power at your convenience.  
 

This machine is listed for sale by Adams Machinery Company located in Lake Bluff, Illinois