NEW Amada/Marvel Model: SA330WPC
Horizontal Mitering Saw
SPECIFICATIONS & FEATURES
Capacity
Blade at 90 degress
Rectangular - 13” H x 16” W (330 mm x 406mm)
Round - 13” (330 mm) Minimum Remnant 9”
Blade at 45 degrees
Rectangular - 11” H x 13” W (280 mm x 330m)
Round - 11” (280 mm)
Mitering: Manually positioned to 45o right, equipped with degree scale.
Blade: 1” x .035” x 13’7” (27 mm x .87 mm x 4140 mm)
Blade Tension: 28,000 PSI. Manually controlled tension with Blade Tension Indicator Gauge provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
Speed Range: 95 – 295 feet per minute (29 – 90 meters per minute) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. The on-screen tachometer assures accurate speed setting.
Hydraulic Down Feed: Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed: Length settings of 0 – 27.56” (0 – 700 mm) are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005 per index. Maximum pull weight fully supported on rollers 4,400 lbs. (1996 kg).
PC Programmable Control:
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0 – 393.661” (in inches up to 3 decimal places) (9999 mm) and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 10 jobs consecutively.
Motors Blade Drive: 5 H.P. (3.75 kW). Hydraulic Pump Motor: 1 H.P. (.75 kW). Coolant Pump Motor: .125 H.P. (0.09 kW). All motors are 230-volt, 3 ph., 60 Hz.
Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Blade Guides: The carbide blade guides provide accuracies of + .002 per inch (.051 mm) of cut material.
Fast Approach: Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Chip Brush: Powered from the drive wheel of the saw, the brush changes speed with the blade to assure that chips are being removed from each gullet, improving cutting performance and blade life.
Full Stroking Hydraulic Vice Jaws: Hydraulic vices hold the work piece, providing accurate cuts and longer blade life.
Shuttle Vise: The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts. Remnant length is 9.25” (235 mm).
Variable Vise Pressure Controls: Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material, allowing the piece to be held securely and without distortion is standard with the machine. (Variable vise pressure minimum range is 142 PSI).
Operator’s Control Panel: Conveniently mounted on the Right-hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Shuttle Advance & Retract, Coolant and Work Light.
Work Light: Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.
Automatic Chip Removal: The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant can drain back to the tank before the chips are removed from the machine.
Hydraulic Hold-Downs: The nesting fixtures for vertical clamping are designed for high-production multiple cutting. Vertically mounted hydraulic clamps located on each vise jaw apply downward pressure to hold multiple bar work or structural shapes. Maximum Capacity: 12” x 18” (305 mm x 457mm).
Auto Mist Lube: Mist lubricant in addition to standard flood coolant for lubrication.
Packing Size: 90” x 86” x 68” W x L x H - (2280 mm x 2190 mm x 1730 mm)
Machine Weight: 3,175 lbs. (1440 kg)
Crated Machine Weight: 3,500 lbs. (1588 kg)
Pass Line Height: 32.25” (820 mm)
20 Blades: 20 SGLB, 13’7’’ long x 1” wide, 3/4 tooth pitch blades ship standard with every new saw purchase included in net price unless otherwise specified on purchase order. Please specify alternative blade type at time of purchase.
OPTION DESCRIPTIONS
SA330EWPC - Horizontal Mitering Saw HEAVY-DUTY, HYDRAULIC, MITER CUTTING, HORIZONTAL, METAL CUTTING BANDSAW WITH 5 H.P. AND 1” BLADE
Warranty - 1-Year additional - One-year additional parts warranty
ESA330/F055
5’ (1.2 meter) First Section Dead Roller Table First Section Dead Roller Conveyor Free Standing: 5’ (1.2 m) long, with 5 ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, two stands, and one end stop.
ESA330/X055
5’ (1.2 meter) Extension Dead Roller Table - Extension dead roller Conveyor 5’ (1.2 m) long, with 5 ball bearing rollers, 2.5” (64 mm) diameter, spaced on 12” (305 mm) centers, one stand, for use as a connected extension to an F055 or an X055.
CL2210 Unist Coolube 2210 - Unist Coolube 2210 is the cutting oil and lubricant that is shipped within your ML2 (Mist drop lubrication system). It is formulated as a metal cutting oil and lubricant for metals, wood, rubber, and most plastics. It is 100% natural, non-toxic, non-staining, and will not oxidize (become sticky or leave a residue). Coolube 2210 cutting fluid does not contain any ingredients currently recognized as hazardous by OSHA, IARC or NIP. Coolube 2210 machining oil will never cause dermatitis and is formulated from cosmetic grade raw materials, which makes it entirely worker and environmentally safe. Coolube 2210 is a USDA certified biobased product.
FOR MORE INFORMATION: Call Rob at 973-497-7570