DOOSAN PUMA 2600SY MULTI AXIS CNC TURNING CENTER

NEW: 2011

 

SPECIFICATIONS:

Swing over bed ............................ 30.7"

Swing over front door ..................... 26.8"

Swing over carriage ....................... 24.8"

Standard chuck through hole I.D. .......... 3.03"

Max turning diameter, main spindle ........ 14.8"

Max turning length ........................ 29.92"

Distance between main & subspindle nose ... 43.46"

Spindle speed ............................. 4,000 RPM

Spindle nose .............................. ASA-A2-8

Draw tube I.D. ............................ 3.03"

Spindle bore diameter ..................... 3.38"

AC high torque spindle motor (30 min) ..... 30 HP

Minimum programmable angle (degrees) ...... 0.001

Rapid traverse rate ....................... 200 RPM

C-axis contouring torque .................. 112 ft-lbs

C-axis braking torque ..................... 663 ft-lbs

X axis travel ............................. 10.23"

Z axis travel ............................. 32.67"

X & Z axis rapid traverse rate ............ 1,181 IPM

Number of tools ........................... 12

Number of index positions ................. 24

Tool holder type .......................... BMT 65P

Turning tool shank size ................... 1.0"

Boring bar diameter, main spindle ......... 2.0"

Boring bar diameter, sub spindle .......... 1.0"

Tool selection ............................ Bi-directional

Rotating tool RPM ......................... 5,000 RPM

Rotating tool spindle motor (15min) ....... 7.5 Hp

Rotating tool torque (15 min rating) ...... 34.7 ft-lbs

Rotating tool collet type ................. ER32

Milling collet capacity ................... 1/8" to 3/4"

Y-axis travel ............................. 4.13" (±2.065")

Y-axis rapid traverse rate ................ 394 IPM

B axis travel (sub-spindle) ............... 32.6"

B axis rapid traverse rate ................ 1.181 IPM

Sub-spindle guideway span ................. 13.2"

Spindle speed ............................. 6,000 RPM

Spindle motor (30 min. rating) ............ 20 HP

Spindle bore .............................. 2.44"

Draw tube ID .............................. 1.97"

Rapid traverse rate ....................... 1181 IPM

Minimum programmable angle ................ 0.001 deg

Floor space (Length X Width) .............. 153" x 74"

Machine height ............................ 85"

Height from floor to spindle center ....... 43.7"

Approx.Net weight ......................... 14,220 lbs

 

EQUIPPED WITH:

  - FANUC 31iT CNC CONTROL

  - TOOLSETTER

  - 10" 3-JAW HYD. CHUCK ON MAIN SPINDLE

  - 8" 3-JAW HYD. CHUCK ON SUBSPINDLE

  - PARTS CATCHER, PARTS CONVEYOR

  - 12 STATION TURRET w/24 POSITION INDEXING

  - CHIP CONVEYOR

  - ALL AVAILABLE LIVE & STATIC TOOLHOLDERS