NEW size=3>SPARTAN IRONWORKER
MODEL: MSIW192DX
SPECIFICATIONS:
WORK STATIONS: ............... 5
PUNCHING
PUNCHING PRESSURE: ........... 192 TONS
STANDARD TOOLING: ............ 1-1/2″ X 1-1/2″
LARGE TOOLING: ............... 2″ X 1-3/16″
*OVERSIZE TOOLING: ........... 4-5/15″ X 1/2″
THROAT DEPTH: ................ 24″
STROKE LENGTH: ............... 3-1/8″
CYCLE/MIN. (3/4″): ........... 22
WORK HEIGHT: ................. 44-1/2″
FLAT BAR SHEARING
CAPACITY: .................... 16″ X 1″
WIDTH & THICKNESS: ........... 24″ X 3/4″
BLADE LENGTH: ................ 24″
ANGLE FLANGE TRIM: ........... 5″ X 5/8″
WORK HEIGHT: ................. 37″
ANGLE SHEAR
90°: ......................... 8″ X 8″ X 3/4″
45°: ......................... 3″ X 3″ X 3/8″
WORK HEIGHT: ................. 44-1/2″
BAR SHEARING
ROUND BAR: ................... 2-1/4″
SQUARE BAR: .................. 2″ X 2″
**CHANNEL SHEAR: ............. 10″
**H BEAMS: ................... 10″
**T BEAMS: ................... 6″ X 9/16″
WORK HEIGHT: ................. 44-1/2″
NOTCHING
RECTANGULAR NOTCHER: ......... 2-3/8″ X 4″ X 5/8″
**LARGE V: ................... 4″ X 4″ X 5/8″
WORK HEIGHT: ................. 36-1/2″
FEATURES:
FIVE (5) SETS OF PUNCHES & DIES
PUNCHES: 9/16″, 11/16″, 13/16″, 15/16″, 1-1/16″
DIES: 19/32″, 23/32″, 27/32″, 31/32″, 1-3/32″
LED LIGHTING AT ALL WORK STATIONS
ADJUSTABLE ELECTRIC BACK GAUGE (36″)
SCRAP BOXES AT PUNCHING & NOTCHING STATIONS
ADJUSTABLE STROKE DEPTH AT PUNCH
TWO (2) FULL-CONTROL FOOT PEDALS
TWO (2) HOLD DIE HOLDERS
TWO (2) PIECE GAUGING TABLE AT PUNCH STATION
KEYED PUNCH HOLDER FOR SHAPED TOOLING
SPECIAL TOOLING
SINGLE V BENDING ATTACHMENT: 10″ WITH 3″ WIDE V
MULTI V BENDING ATTACHMENT: 27-1/2″ WITH 1/2″, 3/4″, 1″, 1-1/4″ WIDE V
**WITH SPECIAL TOOLING ONLY. (MEASUREMENTS CONVERTED FROM METRIC UNITS AND MAY NOT BE EXACT.)
SPECIFICATIONS AND MACHINE DESIGN MAY CHANGE WITHOUT NOTICE AT THE SOLE DISCRETION OF AMADA’S ENGINEERING DEPARTMENT.
FOR MORE INFORMATION: Call Rob at 973-497-7570