10" X 27" JONES & SHIPMAN "HIGH PRECISION"
UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER
** EIT DOUBLE SWIVEL WHEELHEAD DESIGN
MODEL: 1300-EIT S/N: BO-93894 NEW: 1984
MAXIMUM SWING ........................... 10"
DISTANCE BETWEEN CENTERS ................ 27"
ADJUTMENT OF TABLE, INCLUDED ANGLE ...... 17°
LONGITUDINAL TABLE SPEED (HYDRAULIC) .... 3" TO 180" IPM
MANUAL TRAVERSE, HANDWHEEL PER REV. ..... 0.50"
FINE HAND TRAVERSE KNOB GRAD. ........... 0.0005"
WHEELHEAD:
CROSS FEED HANDWHEEL GRAD. .............. 0.0002"
ONE DEPRESSION OF FINE FEED LEVER KNOB .. 0.0001"
AUTO INFEED @ TABLE REVERSALS ........... 0.0001" TO .0006"
FEED @ REVERSAL OF TABLE,
REDUCTION IN DIAMETER ................... 0.0002" TO .0012"
TOP SLIDE ADJUSTMENT .................... 4- 1/8"
CROSS TRAVERSE OF WHEELHEAD ............. 7"
WHEELHEAD, UPPER SWIVEL ADJUSTMENT,
EACH SIDE OF NORMAL POSITION ........... 180°
SWIVELLING BASE ADJUSTMENT, CLOCKWISE ... 90°
75° CCW
WHEEL SIZE .............................. 12" X 1" X 5"
WHEEL SPEEDS (2) ........................ 2,000 & 2,650 RPM
WHEELHEAD MOTOR ......................... 5.5 HP
WORKHEAD SPINDLE SPEEDS ....... 40, 60, 90, 140, 210 & 320 RPM
WORKHEAD SPINDLE TAPER .................. #3MT
APPROX. FLOOR SPACE REQUIRED ............ 103"L-R x 58" x 69"H
APPROX. MACHINE WEIGHT .................. 5,376 LBS
MACHINE FEATURES:
JONES & SHIPMAN TYPE "EIT" DOUBLE SWIVEL WHEELHEAD DESIGN
- ALLOWS FOR GRINDING TAPERS THAT ARE STEEPER THAN CAN
BE OBTAINED BY THE NORMAL METHOD OF SWIVELLING THE
MACHINE TABLE. IN ADDITION, COMBINED PARALLEL AND FACE
GRINDING CAN BE PERFORMED IN ONE OPERATION AS ON AN
ANGLE HEAD MACHINE.
- IN ADDITION TO GRINDING STEEP TAPERS THIS WHEELHEAD
CAN BE USED AS AN ANGLE HEAD MACHINE FOR PARALLEL AND
FACE GRINDING IN ONE OPERATION. IT IS FULLY SUPPORTED
IN ALL POSITIONS AND THE SLIDES AND SWIVELS ARE
TOTALLY ENCLOSED.
- GRINDING WHEELS CAN BE MOUNTED AT EITHER END OF THE
WHEEL SPINDLE WITHOUT CHANGING THE DRIVING BELTS.
HYDRAULIC OPERATION FEATURING:
- POWER TABLE TRAVERSE
- AUTO INFEED
- AUTO PLUNGE INFEED
FINE FEED MECHANISM FOR INFEED
FINE FEED KNOB FOR TABLE TRAVERSE
DUAL LIVE/DEAD WORKHEAD SPINDLE
EQUIPPED WITH:
SWING AROUND I.D. GRINDING ATTACHMENT
JONES & SHIPMAN I.D. SPINDLE
ASSORTMENT OF QUILLES FOR THE I.D. SPINDLE
CENTER IN WORKHEAD
COOLANT TANK WITH PUMP
MACHINE IS WIRED FOR 3/60/575 VOLTS FROM THE FACTORY.
TRANSFORMER AVAILABLE TO PURCHASE FOR $875,
FOR 200-208-220-230-240-440-460-480 VOLTS.
PLEASE SPECIFY YOUR VOLTAGE REQUIREMNT AND WE
WILL PROVIDE THE CORRECT TRANFORMER.
Link to video: href="https://youtu.be/RUtO1zSFOyw?si=rsYbYsE6x97C0RzK">https://youtu.be/RUtO1zSFOyw?si=rsYbYsE6x97C0RzK
** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE. **
** VERY GOOD CONDITION & APPEARANCE **
FOR MORE INFORMATION: Call Andy at 973-497-7600