NEW Amada/Marvel Model: SA460WPC
Horizontal Mitering Saw
FEATURES
Hydraulic Down Feed
Feed rate and down pressure can be controlled for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
Length settings of 0-27.56” (0-700mm) are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is + .005” per index.
PC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0-999.999” and the Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made.
Out-of-Stock Switch
The machine will shut off automatically when the material is no longer present in the rear vise jaws, allowing for truly automatic operation.
Full Stroking Hydraulic Vise Jaws
Hydraulic vices hold the work piece, providing accurate cuts and longer blade life.
Shuttle Vise
The shuttle vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts. The remnant length is 9.5” (241 mm).
SPECIFICATIONS
Model SA460WPC
Cutting Capacity
Round (Diameter) at 90°: 18″ 460 mm
Round (Diameter) at 45°: 15″ 380 mm
Rectangle (W x H) at 90°: 24″ x 15″ 23″ Max x 18″ 610 x 380mm 580 Max x 460 mm
Square at 90°: 18″ x 18″ 460 x 460 mm
Rectangle (W x H) at 45°: 15″ x 15″ 380 x 380 mm
Work Load Capacity
Blade Saw
Blade Size (L x T x W): 18’10” x 0.050″ x 1-1/2″ 5730 x 1.3 x 41 mm
Blade Speed: 65-330 ft/min by Inverter 20-100 m/min by Inverter
Tension Control: Hydraulic
Blade Control
Top Limit Setting: Manual Setting
Cutting Control: Hydraulic Flow Control Valve
Vise Operation
Type: Main and Rear Vise
Control: Hydraulic Full-Stroke Cylinder
Motors
Saw Blade: 5 HP 3.7 kW
Hydraulic Pump: 1/2 HP 0.37 kW
Cutting Fluid Pump: 1/8 HP 0.06 kW
Power Requirement
Power Supply Voltage: AC230V±10% or AC460V±10%, 3 PH, 60 Hz,
Required at Factory Voltage Setting
Cutting Fluid Tank Capacity: 14.5 gal 55 liters
Tank Capacity: 4.0 gal 15 liters
Pressure Setting
Chip Disposal: Chip Conveyor
Material Index
Index Mechanism: Shuttle Vise
Stroke: 27.56″ 700 mm
Length: 0.5″-393.7″ 13-9999.9 mm
Number of Input Block/Station: 10
Number of Cut-Off Pieces: 1-999
Remnant Length: 11″ plus length of parts 280 mm plus length of parts
FOR MORE INFORMATION: Call Rob at 973-497-7570