W/STRAIGHT WHEELHEAD

 

 

GENERAL CAPACITY

SWING OVER TABLE: .................... 10"

DISTANCE BETWEEN CENTERS: ............ 20"

MAX. GRINDING DIAMETER: .............. 10"

MAX. LOAD BETWEEN CENTERS: ........... 176 LBS

GRINDING WHEEL

DIAMETER X WIDTH X BORE: ............. 16"X 1.5"X 5"

WHEEL SPEED: ......................... 1940 RPM

MAX. PERIPHERAL SPEED: ............... 118 FT/SEC

WHEELHEAD

SLIDING ANGLE: ....................... 90 DEGREES

AUTOMATIC RAPID TRAVERSE: ............ 236 IN/MIN

INFEED TRAVEL: ....................... 6"

MIN. INCREMENT INFEED: ............... 0.000010"

TAILSTOCK:

QUILL TRAVEL ......................... 1"

CENTER TAPER: ........................ MT3

WORKHEAD:

SPINDLE SPEED (VARIABLE): ............ 50~500 RPM

CENTER TAPER: ........................ MT3

SPINDLE TYPE: ........................ FIXED & ROTARY

DIAMETER OF BORE: .................... 0.79"

INTERNAL GRINDING SPINDLE

SPINDLE SPEED: ....................... 14000 RPM (STD.) OR 25000 RPM (OPT.)

MAX. GRINDING BORE: .................. 0.9375"~ 2.75"

MAX. GRINDING LENGTH: ................ 2.75"

MAX. CHUCKING LENGTH: ................ 10.75"

MAX. CHUCKING DIAMETER: .............. 4.33"

TABLE:

SWIVELING ANGLE ...................... 7 DEGREES

(C.C.W):

RAPID FEEDERATE: ..................... 0-315 IN/MIN

MIN. INCREMENT FEED: ................. 0.0001"

MOTORS

WHEEL SPINDLE MOTOR: ................. 5 HP

WORKHEAD MOTOR: ...................... 0.25 HP

HYDRAULIC PUMP: ...................... 1 HP

LUBRICATION PUMP: .................... 0.25 HP

COOLANT PUMP: ........................ 0.125 HP

WHEELHEAD (X AXIS) MOTOR [FANUC]: .... 0.8 HP

TABLE (Z AXIS) MOTOR [FANUC]: ........ 0.8 HP

MACHINE

NET WEIGHT (SEMI-ENCLOSED): .......... 4400 LBS

GROSS WEIGHT INCLUDING PACKING: ...... 5500 LBS

PACKING DIMENSION: ................... 110"X69"X81"(L X W X H)

 

- FANUC OI-TC CNC CONTROLLER

- DIAMOND DRESSER

- TABLE DIAL GAUGE

- WHEEL EXTRACTOR

- HALOGEN LAMP

- BALANCING STAND W/ ARBOR

- INFINITE VARIABLE WORKHEAD

- GRINDING WHEEL W/ FLANGE

- SEMI-ENCLOSED SPLASH GUARD

- LEVELING SCREWS W/ BLOCKS

- OPERATION MANUAL WITH PARTS LIST

- TOOL BOX W/ ADJUSTING TOOLS

- COOLANT SYSTEM W/ MAGNETIC SEPARATOR

- CARBIDE TIP CENTERS

- LUBE OIL TEMPERATURE REGULATOR (G32A/G38A)

 

- FANUC OI-TC CNC CONTROL, FANUC AC DRIVES AND SERVO MOTORS,

WITH 2 YEAR FANUC WARRANTY.

- HEAVILY RIBBED BOX-TYPE BASE IS MADE OF MEEHANITE

CASTINGS, PROVIDING EXCELLENT RIGIDITY TO ENSURE MACHINE

STABILITY.

- TABLE IS FULLY SUPPORTED IN THE FULL TRAVEL TO AVOID OVERHANG.

- HYDRAULICS, COOLANT AND LUBRICATION SYSTEMS ARE SEPARATED

FROM MACHINE TO ELIMINATE VIBRATION AND DISSIPATE HEAT.

- GENEROUSLY PROPORTIONED, THE ENLARGED AND PROPERLY SLOPED

DRAINAGE TROUGHS UNDERNEATH THE WHEELHEAD BASE PROVIDES RAPID COOLANT DRAINAGE NEEDED DURING HEAVY DUTY GRINDING AND PREVENTS THERMAL DISTORTION OF BASE.

- STURDY RIGID-DESIGNED WORKHEAD IS ELECTRONICALLY CONTROLLED GIVING VARIABLE SPINDLE SPEEDS. WORKHEAD SWIVELS 90°CCW TO 30°CW FOR VARIOUS GRINDING OPERATIONS. A DUAL OIL SEAL AND COVER

PREVENTS COOLANT SEEPAGE INTO THE WORKHEAD.

- THE DESIGN OF THE TAILSTOCK IS BOTH RIGID AND ROBUST. HOUSED IN A CAST BODY, THE HARDENED NITRALLOY STEEL SLEEVE IS DESIGNED TO CARRY A MT4 CENTER FOR G32/G38 AND A MT3 CENTER FORG20/G25.

- AN OPTIONAL HYDRAULIC TAILSTOCK WITH FOOT PEDAL IS AVAILABLE FOR EASY LOADING AND UNLOADING OF PARTS.

- A COMBINATION OF HYDROSTATIC AND HYDRODYNAMIC BEARINGS,

SURROUNDED BY A HIGH PRESSURE OIL FILM, ELIMINATES METAL TO METAL CONTACT TO PROVIDE HIGH RIGIDITY AS WELL AS HIGH VIBRATION DAMPING PERFORMANCE. (EXCEPT G20P/G25P)

- A PRESSURE SWITCH INTERLOCK PREVENTS SPINDLE START-UP UNTIL

OIL PRESSURE IS ESTABLISHED. THIS PRESSURE SWITCH INTERLOCK ALSO STOPS THE SPINDLE IF OIL PRESSURE FAILS.

- THE ONE V AND ONE FLAT HAND-SCRAPED GUIDEWAYS ARE TURCITE

COATED AND INCORPORATED WITH AN AUTOMATIC LUBRICATION SYSTEM, PRECISION BALLSCREW, AC SERVO MOTOR AND A 0.000004" LINEAR FEEDBACK SYSTEM TO ENSURE SMOOTH MOVEMENT OF THE WHEELHEAD FOR SUPERIOR POSITIONING ACCURACY AND REPEATABILITY.

- THE RIGID TABLE WITH BOX-TYPE STRUCTURE TRAVELS ON A CUSHION OF OIL WITH NO METAL-TO-METAL CONTACT.

- Z-AXIS POSITIONING ACCURACY AND REPEATABILITY IS ASSURED WITH AN AC SERVO MOTOR AND HIGH PRECISION, PRE-TENSIONED BALLSCREWS.

- A SWIVELING TABLE DIAL INDICATOR ENABLES RAPID CYLINDRICITY CORRECTIONS AND TAPER GRINDING APPLICATIONS.

- SLIDEWAYS, BALLSCREWS AND SPINDLE ARE CONTINUOUSLY LUBRICATED BY AN AUTO-LUBE SYSTEM TO ENSURE LONG SERVICE LIFE AND MAINTAIN MAXIMUM ACCURACY.

- A HIGHLY-AUTOMATED GRINDING SYSTEM CAN BE CUSTOMIZED WITH A WIDE SELECTION OF OPTIONAL EQUIPMENT...INCLUDING AN AUTOMATIC OD SIZING DEVICE, GAP CONTROL, CRASH CONTROL AND TOUCH PROBE FOR AXIAL POSITIONING.

- THE HINGED, SWING-DOWN INTERNAL GRINDING ATTACHMENT (OPTIONAL) SWINGS DOWN INTO WORKING POSITION EASILY AND QUICKLY. A PATENTED LOCKING DEVICE ADDS SAFETY AS IT PREVENTS THE ID ATTACHMENT FROM SWINGING DOWN ABRUPTLY. (EXCEPT G32A/38A SERIES)

 

SPECIAL OPTIONS AND ACCESSORIES (CALL FOR PRICING):

AUTOMATION SYSTEMS

- HYDRAULIC TAILSTOCK

- SBS DYNAMIC BALANCE SYSTEM (INCLUDE FACTORY INSTALLATION)

- MARPOSS CRASH CONTROL

- MARPOSS GAP CONTROL

- MOVOMATIC AUTO SIZING DEVICE (0.4" - 2.4")

- MARPOSS AUTO SIZING DEVICE (0.4" - 3.15")

- MARPOSS TOUCH PROBE

BACK PLATES & SCROLL CHUCKS:

- 3-JAW SCROLL CHUCK (4") (MUST ORDER WITH 4" BACK PLATE)

- 3-JAW SCROLL CHUCK (5") (MUST ORDER WITH 5" BACK PLATE)

- 3-JAW SCROLL CHUCK (6") (MUST ORDER WITH 6" BACK PLATE)

- 3-JAW SCROLL CHUCK (8") (MUST ORDER WITH 8" BACK PLATE)

- 4-JAW INDEPENDENT CHUCK (8") (MUST ORDER WITH 8" BACK PLATE)

- 4-JAW INDEPENDENT CHUCK (6") (MUST ORDER WITH 6" BACK PLATE)

- 5C BACK PLATES

- REGULAR BACK PLATES (VARIOUS SIZES DEPENDING ON CHUCK)

- FIXED BACK PLATES (VARIOUS SIZES DEPENDING ON CHUCK)

COOLANT SYSTEMS (UPGRADES FROM THE STD. COOLANT):

- COOLANT SYS. W/MAG. SEPARATOR& PAPER FILTER (20L/MIN, 80L)

- COOLANT SYSTEM W/PAPER FILTER (20L/MIN, 80L)

- COOLANT SYS. W/MAG. SEPARATOR& PAPER FILTER (60L/MIN, 140L)

- COOLANT SYSTEM W/PAPER FILTER (60L/MIN, 140L)

COLLETS & COLLET CLOSERS:

- ROYAL MANUAL LEVER TYPE 5C COLLET CLOSER

- ROYAL AIR-OPERATED 5C COLLET CLOSER (MUST ORDER W/AIR CONTROL)

- KIT W/HAND-OPERATED VALVE FOR AIR 5C (MUST ORDER WITH AIR 5C)

- KIT W/FOOT-OPERATED VALVE FOR AIR 5C (MUST ORDER WITH AIR 5C)

- LYNDEX 5C COLLETS (SIZES FROM 3/64" - 1 1/8")

DRESSING & GRINDING ATTACHMENT

- 2-POINT DIAMOND DRESSER

- 3-POINT DIAMOND DRESSER

- INTERNAL GRINDING ATTACHMENT

STEADY RESTS

- 2-POINT STEADY RESTS (VARIOUS SIZES)

- 3-POINT STEADY RESTS (VARIOUS SIZES)

OTHER ACCESSORIES

- GRINDING WHEELS

- SPARE WHEEL FLANGES

- LUBE OIL TEMPERATURE REGULATOR

- 460V TRANSFORMER (15KVA)

- FULL ENCLOSURE SPLASH GUARD W/OIL& MIST SEPARATOR