CNC Control

yes

Type of CNC Control

Fanuc FS 0i-TF 2 system

Machining Capacity

Max. Diameter of chuck

Pull type collet chuck

1.574 or 40mm

Fixed type collet chuck

1.377 or 35mm

Fine precision air chuck

1.77 or 45mm

Power type chuck

1.77 or 45mm

Diaphragm Chuck

1.968 or 50mm

Max Machining Length

1.969 or 50mm

Max. workpiece length with loader

1.574 or 40mm

Number of Spindles

Two

Spindle Nose

Flat

Spindle Thru Hole

.669 or 17mm

Inner diameter of draw tube

.433 or 11mm

Spindle Speed Range

8,000 RPM

Slide - Number of Tool Platens

Two

Type of Slide - Horizontal linear tool platen

X & Y Dovetail

Control Axis

2x2 axes (x,z simultaneous)

Slide Stroke

See X & Z below

X Axis Travel

7.08 or 180mm

Z-Axis Travel

7.87 or 200mm

Rapid Feeds - X & Z

15 m/min

Tools

See Below

Shank size of square turning tools

10/12/ (16) mm

Number of Tools

5x2

Diameter of Drill Shank

.787 or 20mm

Spindle Drive 15 min/cont.

5HP or 1.5kW and at 15 min 7.5HP or 2.2kW

Robotic Gantry Loader

yes

Dimensions

55.11 Width x 55.11 Depth x Ht. 62.99

Robotic Gantry loaders - Load/Unload Time

3.5 Seconds

Weight

5900 pounds


Number of Part Cycles on this machine: 30,000 approximate - Tubing Part with ONLY a Chamfer OD/IDControl: GN2-3200W: FS 0i-TF 2 system    Controlled axis X, Z X, Z 2 axes × 2 systems    Loader with one slide: 2 axes × 2 systems    Loader with one slide: 2 axes × 1 systemGantry Loader specifications (Yes)Type 2-axes NC 1 saddle 2 hands 1 saddle 2 hands– 2 saddle 4 handsMax. Work Size Ø 40 x 40 mm Ø 40 x 40 mmMax. Work Weight 250 g 250 gFeed rate Right and left operation 130 m/min 130 m/minUpper and lower sides 154 m/min 154 m/minControl unitControl system PMC axis control PMC axis controlControl soft Flexible loader control Flexible loader controlDrive system Right and left operation Rack & pinion Rack & pinionUpper and lower sides Rack & pinion Rack & pinionTank capacity (in Liters)Spindle cooling device 7 l 9 lLubricating system 1.5 l 1.5 l x 2Coolant tank 90 l 200 lAir supplyAir pressure supply 4 bar (4 kgf/cm2) 4 bar (4 kgf/cm2)Keyance GT-2 Part Scanner with machine.Splash guard interlockIncluded Optional accessories: Gantry loader (Yes), Chuck Systems, Air Blow, High pressure & inner coolant supply, Spindle inner coolant,, Automatic power off, Chip conveyor, Chip box, Total and preset counter, Total and multi counter,Coolant mist collector duct, Damper & duct, Warning light, Specification color, etc.Loader specifications

This machine is listed for sale by Orca Machine Tools, Inc. located in Fridley, Minnesota