CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
COLE-TUVE Single-Initial-Pinch Rolls utilize a design that has gained worldwide acceptance. All sizes use strong cast-iron frames for rigidity and stability.
The rolls are journalled in long-life bronze bearings. The upper and lower rolls are driven by a brake-motor through a heavily proportioned gearbox, producing a single rolling speed. The lower front roll, which is used for clamping the work piece, and the rear roll, which is used for setting the bending radius, are each adjusted by a single handwheel.
A secure locking device keeps the upper roll in proper position during rolling and is easily released to allow the roll to be swung out for removal of the rolled part. A cone bending attachment is standard equipment and a movable foot control on a trailing lead add to operator convenience and ease of operation. The rolls are grooved for rolling three sizes of round bars. When delivered and connected to a power supply, the machine is ready to operate.
Brake Motor
Cone Bending Attachment
Electrics for 3/60/220/440
Low Voltage at the Controls
Movable Foot Control with Emergency Stop Palm Button
Emergency Stop Wire at Front and Rear of Machine
Handwheels for Roll Adjustments
Lockable Swing-Out Upper Roll
3 Grooves For 3/8", 1/2", And 5/8" Round Bars
Scale to Indicate the Positions of the Rear Roll

SPECIFICATIONS:
MODEL: IRM 1050 x 110
Capacity (Mild Steel): 3' x 5/32"
Rolls Diameter: 4.33"

MODEL: IRM 1050 x 130
Capacity (Mild Steel): 3' x 3/16"
Rolls Diameter: 5.12"

MODEL: IRM 1270 x 120
Capacity (Mild Steel): 4' x 5/32"
Rolls Diameter: 4.72"

MODEL: IRM 1270 x 140
Capacity (Mild Steel): 4' x 3/16"
Rolls Diameter: 5.51"

MODEL: IRM 1550 x 110
Capacity (Mild Steel): 5' x 1/8"
Rolls Diameter: 4.33"

MODEL: IRM 1550 x 140
Capacity (Mild Steel): 5' x 5/32"
Rolls Diameter: 5.51"

MODEL: IRM 2050 x 110
Capacity (Mild Steel): 6' x 14 ga.
Rolls Diameter: 4.33"

MODEL: IRM 2050 x 130
Capacity (Mild Steel): 6' x 1/8"
Rolls Diameter: 5.12"

MODEL: IRM 2050 x 140
Capacity (Mild Steel): 6 x 5/32"
Rolls Diameter: 5.51"

MODEL: IRM 2550 x 140
Capacity (Mild Steel): 8' x 12 ga.
Rolls Diameter: 5.51"

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida