1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating
   distortion.  The shorter required stroke gives you a faster punching cycle.
2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke.  Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3. 3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts.  Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing
   distortion giving you a higher quality cut.
6. Coper Notcher- the low rake angle keeps part flat and under control during notching.
7. Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.

STANDARD EQUIPMENT

• Automatic Hold Down
• Coupling Wrench
• Punch Holder, Stripper, & Die Block
• 3/8” Allen Wrench
• 5 Punch & Die Sets 9/16” through 1-1/16”
• Set of Chip Buckets
• Set of Angle Knives
• Extra Filter Element
• Set 1-1/4” Round Bar Knives
• Foot Switch
• Set of 16-5/8” Plate Shear Knives
• Instruction/Parts Book/Video Link
• Set of Coper Knives

ATTACHMENTS

BENDING ATTACHMENTS
The bending attachments are designed to increase productivity on the punch end of the machine. They utilize the dovetail mounting system for quick and easy installation. 12” and 14” versions are mounted parallel to the beam allowing you unlimited throat depth and include 4-way bending die with openings of 7/8″, 1-1/2″, 2″ and 3″. The 24” version mounts perpendicular to the beam, and include 4-way bending die with openings of 7/8”, 1-1/8”, 1-1/2” and 2”.

CHANNEL PROCESSING ATTACHMENTS
On the punch end of the machine we offer an adjustable Channel Shear capable of shearing 2”-8” standard channel. We also offer a Channel Die Block which replaces the standard die block and is designed to punch a hole in the leg or web of channel.

Channel Shear Kits are size specific channel shear blades and a hold down block that replace the standard angle knives and angle block and allows you to shear channel without slug loss in the angle section of the machine.

OVERSIZE PUNCHING ATTACHMENTS
Oversize Attachments mount in place of standard punch attachment and are designed to punch a 50-ton maximum hole. Heavy Duty attachments and urethane stripping options for attachments 2-3/4” and larger are available upon request.

QUICKSET GAUGING TABLES
The quickset gauging table option is a productivity tool for the punch end. The gauging table mounts around the die block and uses finger stops to repeat a series of punched holes in flat bar or angle. The attachment comes with a table and flat bar gauge with measuring rules for easy hole location layout. A 5’ or 10’ extension can be added to the left or right side of the base table for longer part processing.

SHEARING BACKGAUGES
The backgauge option is a productivity tool for the shearing section. The backgauge mounts on the drop side of the machine and uses a compression sleeve for infinite, easy adjustment to gauge cut lengths in the angle, flat bar and round bar shearing stations. Electronic versions of this backgauge are available which automatically cycles the machine every time material makes contact with the backgauge probe. A support leg is included with the 9’ and 12’ versions.

ROLLER FEED TABLES
The roller feed tables come in 5’ lengths and can be bolted together to make longer sections for fast, easy feeding of plate or angle. Includes 20” wide rollers for flat bar and 6” rollers in the angle section. Adjustable to accommodate floor height and machine type.

PIPE NOTCHING ATTACHMENTS
The pipe notching attachments mount easily on the platen table in place of the punch die block. This is a single notch system. To notch both sides of the pipe you must rotate the pipe and realign with the notching die for the second notch.
The pipe notching attachment is made up of three separate pieces, the pipe notching die holder, the pipe notching die and the pipe notching striker.

• The pipe notching die holder is a universal die holder that bolts to the platen table and can accept 3/4” through 2” Schedule 40 Pipe Notching Dies
• The pipe notching dies are spring return die sets that mount in the pipe notching die holder. Standard sizes of pipe notching dies are 3/4”, 1”, 1-1/4”, 1-1/2” and 2” Schedule 40. Other sizes of pipe and tube notching dies are available upon request but may require a different die holder.
• The pipe notching striker is an extended flat bottom punch used in your standard stripper assembly to press down the pipe notching die.

 

Comparing Piranha 110 Ton Model P-110 Ironworker and Scotchman 12012-24M Hydraulic Ironworker with Tool Table

When deciding which hydraulic ironworker to purchase, it is important to assess the features and benefits of both brands. In this case, we will be comparing the Piranha 110 ton model P-110 ironworker against the Scotchman 12012-24M hydraulic ironworker with tool table.

Speed & Productivity

The Piranha 110 ton model offers faster cutting speeds than the Scotchman 12012-24M, resulting in improved output and reduced costs. Additionally, its quick release shear blade clamping system makes blade changes easier and faster, decreasing downtime between jobs.

Accuracy & Control

The Piranha ironworker provides superior accuracy and control when performing tasks such as curved or beveled cuts, contour punching and forming operations; making it ideal for jobs that require precise cuts or intricate shapes.

Durability & Longevity

The Piranha ironworkers frames are made from heavy duty steel plates that are more durable than those used on most Scotchman models; ensuring they will perform consistently under high stress applications while maintaining their shape over extended periods of use. Its components feature tough alloy steel gears which are resistant to wear and tear; improving longevity even further.

In conclusion, when choosing between a Piranha 110 Ton Model P-110 Ironworker or a Scotchman 12012-24M Hydraulic Ironworker with Tool Table, the Piranha model offers a superior performance advantage due to its faster cutting speeds, superior accuracy and control, greater durability, and improved longevity.