CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
ISO 9001 certified
Large spindle bore 4-1/8”
4-way rapid traverse on Longitudinal and cross ways
All dual inch/metric dials.
solid cast iron machine base
Heavy Duty main motor 15 HP
12 spindle speeds from 25-1,600 rpm
4-way rapid traverse on the carriage, cross and longitudinal ways
54 kinds of inch threads and metric threads
Threading and feeding rate change by levers
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Tools box with leveling pads

STANDARD EQUIPMENT:
Free SINO DRO, installed
Free Taper turning attachment, installed
12” 3-jaw chuck with top reversible jaws
16” 4-jaw chuck
20” Face plate
10” drive plate
¾”-7-1/2” steady rest with roller jaws
1”-5” follow rest
Removable gap
4-way tools post
Chuck guard with safety shut off
Foot brake
Halogen Work light
coolant system
Full length rear splash
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box and leveling pads

SPECIFICATIONS:
Max. swing over bed: 32"
Max. length of workpiece: 80"
Max. swing over cross slide: 22-7/16"
Max. Swing in gap: 40-1/2"
Width of Bed: 16"
Effective length in gap to spindle: 10"
Effective length in gap to chuck: 7"
Spindle bore: 4-1/8”, D1-8
Taper of spindle center: MT#5 with 1:20 reducing sleeve
Spindle speeds: 25-1,600 rpm / 12 steps
Longitudinal feeds: 0.0016-0.055 IPR, 60 kinds
Cross feeds: 0.0008-0.027 IPR, 60 kinds
Inch threads: 80-7/16” TPI, 54 kinds
Metric threads: 0.45-120 mm, 54 kinds
Module threads: 0.25-60 mm, 46 kinds
Diameter pitch threads: 60-0.25 DP , 42 kinds
Max. travel of top slide: 9-1/8"
Max. travel of cross slide: 16-1/2"
Longitudinal rapid travel speed: 18 ft / min.
Cross slide rapid travel speed: 8 ft / min.
Diameter of tailstock quill: 3-1/2"
Max. travel of tailstock quill: 6"
Taper of tailstock quill center: M.T. # 5
Max. weight of workpiece: 2,000 lbs.
4-way tool post size: 1" x 1"
Longitudinal leadscrew diameter / pitch: Diameter: 3” Pitch: 2 TPI
Main Motor: 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V
Rapid traverse motor: 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor: 1/8 HP, 220V/440V, 3 phase, prewired on 220V
Net Weight, approx.: 9,350 lbs
Overall Dimensions: 146 x 48 x 67 in.

OPTIONAL ITEMS:
3900-5160: ALORIS type QC tool post set, 6 pcs
7-1/2” to 15-1/4” large steady rest with roller jaws
3900-5005: Live center for tailstock MT# 5

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida