Max Width of Workpiece

60 inches

Max Thickness of Workpiece (in.)

0.119 inches


60" x 7.00" x 24,000# Cincinnati Forte Slitting LinEStock # 14296Materials:                   CRS, Alum.Max. Coil Width:             60" Thickness Range:             0.010" - 0.119" Max. Coil Weight (Entry):    24,000# Max. Coil Weight (Exit):     20,000# Max. Shear:                  45,000 PSI Max. Yield:                  45,000 PSI Coil I.D. (Entry):           16" - 24" Coil I.D. (Exit):            16" / 20" & 24" Max. Coil O.D.:              60" Line Direction:              Left to Right Mode of Operation:           Driven Line Speed:                  250 / 500 FPM Approx.Consisting of the following:-Entry Turnstile:  Four (4) Arms x 25,000# per Arm  Powered Rotation   Slotted for C-Hooks -Entry Coil Car:  Mast Type   Floor Mounted   Powered Lift and Traverse   Self-Contained Hydraulics   Machine Mounted Controls -Uncoiler:  Single Mandrel Type   Hydraulic Expansion   Holddown with Powered Snubber Roll   Wichita Water Cooled Brake   AC Feedup Drive   Slide Base   Paper Winder -Outboard Support - A & B:  Powered Extension / Retraction -Entry Unit:  Extending Blade Peeler   Manual Side Guides   Powered Entry Pinch Rolls (incomplete)   PVC Applicator   Idler Pinch Rolls for PVC Application   Rotary Crop Shear -Stationary Slitter Base:  20 HP AC Leeson Feedup Motor, 1750 RPM   Renold Gear Reducer, 41.8/1 ratio  75 HP Baldor DC Motor, 1760 RPM, (New in 2001)   Powered Head Lock -Two (2) Slitter Heads:  Injector Type   Powered Traverse   Powered Top Arbor Adjust   Powered Outboard Retraction   "Over the Arbor" design for slitting widths between 48 - 60"   Head #1 - 5" Diameter Arbors   Head #2 - 7" Diameter Arbors -Pit Section:  Inspection Table   Powered Cross Over Table -Tension Stand: Combination Drag and Roll Type  Strip Separator Arm   "Drag" Type with two (2) Cylinders   Two (2) 14" Diameter Tension Rolls   Two (2) Wichita Water Cooled Brakes -Recoiler:  16" Dia. Drum  Hydraulic Pushoff   Hydraulic Expansion & Gripper   Overarm Separator Assembly   150 HP Baldor AC Motor, 1150/2000 RPM   Two (2) Speed Transmission, 2:1 and 1:1 ratios   Bolt-on Risers for 20" & 24" -Exit Coil Car:  Mast Type   Floor Mounted   Powered Lift and Traverse   Self-Contained Hydraulics   Narrow Coil Retainers   Machine Mounted Controls -Exit Turnstile:  Two (2) Arms x 20,000# Per Arm   Powered Rotation   Slotted for C-Hook   Powered Lift / Retract -Two (2) Scrap Winders:  Hydraulically Powered   Manual Scrap Dump   Level Wind -Electrical Controls:  Main Operators Control Console   Auxiliary Operators Control Console   75 HP DC Drive for Slitter Head (New in 2003)  150 HP DC Drive for Recoiler (New in 2001)-Slitter Tooling:  Approx. Knife Count  80 - 0.250" x 5" ID   50 - 0.500" x 5" ID   59 - 0.250" x 7" ID (beveled)   47 - 0.250" x 7" ID (beveled)   58 - 0.250" x 7" ID   Rubbers   Spacers   Shims   Separator Tooling -Hydraulics System -Water Cooler -Removed and in Storage**Temporary Specifications Subject to Revisions****PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE****ALL SPECIFICATIONS ARE SUBJECT TO BUYERS VERIFICATION**

This machine is listed for sale by Machinery International Corp located in Woodbridge, Connecticut