MODEL SE-13-01-SL HENRICH 13 DIE ROD BREAKDOWN LINE (13637) |
|
Stock Code: |
13637 |
Price: | $RFQ |
Subcategory: | Wire Drawers |
Manufacturer: |
Henrich |
Model: |
SE-13-01-SL |
Condition: | Used |
MACHINE #13637
SPECIFICATIONS
-MANUFACTURER: HENRICH
-MODEL: M-85.11.A
-TYPE: SE-13-01-SL ROD BREAKDOWN LINE
-CAPACITY
-MATERIAL: COPPER
-ENTRY: 8mm (5/16") DIAMETER
-FINISH SIZE: 1.219mm (.048") TO 2.05mm (.080")
-ENTRY: 10.7mm (.420")
-FINISH: 1.372mm (.054") TO 2.05mm (.080")
-SPEED: 30 m/s (5910 FPM)
-CAPSTAN SIZE: 457mm (18") DIAMETER
-PULL-OUT CAPSTAN SIZE: 457mm (18") DIAMETER
-DRIVE MOTORS:
-CAPSTANS 1 THROUGH 3: 58kW (78 HP)
-CAPSTANS 4 THROUGH 7: 52kW (70 HP)
-CAPSTAN 8: 47kW (63 HP)
-CAPSTANS 9 THROUGH 12: 30kW (40 HP)
-PULL-OUT CAPSTAN: 47kW (63 HP)
LINE CONSISTS OF THE FOLLOWING:
-(1) OVERHEAD WIRE PAYOFF
-(1) HENRICH MODEL SE-13-01-SL ROD BEAKDOWN MACHINE
-(1) HENRICH PULL-OUT CAPSTAN
-(1) HENRICH MODEL ES-01-DR-501-4 CONTINUOUS RESISTANCE ANNEALER
-DESIGN: 4-CONTACT SHEAVE DESIGN
-WIRE SIZE RANGE: 1.219mm (.048") - 2.588mm (.102")
-CONTACT PULLEY DIA: 500mm (19.7")
-ANNEALING SPEED: MAXIMMUM 30 m/s
-TRANFORMER SIZE: 360 kVA
-ANNEALING VOLTAGE: 55 VOLT AC 3 PHASE
-(1) DANCER/ACCUMULATOR
-(1) BONGARD MODEL KW-800 STATIC (DEAD BLOCK TYPE) COILER
-CAPACITY: 1.20mm (.047") - 3.60mm (.141") DIAMETER
-COILING SPEED: 0 - 32m/s
-COIL (BARREL) SIZE: MAX HEIGHT...APPROX 2,000mm (78.7")
MIN HEIGHT......... 1,000mm (39.4")
OUTSIDE DIA..APPROX 1,100mm (43.3")
CORE DIA........... 590mm (23.2")
*COILER IS EQUIPPED WITH PNUEMATICALLY ACTUATED ACCUMULATION
MOTORIZED ROLL CONVEYOR
PNUEMATIC BARREL POSITIONING
LAYERING PENDULUM
SCISSOR TYPE LIFTING PLATFORM
-FILTRATION SYSTEM: FILTER TECH 200 GPM FILTRATION SYSTEM
-TWO COMPARTMENT RECEIVER TANK COMPLETE WITH
COVER, BAFFLES, TWO 7-1/2 HP CLEAN SUPPLY
PUMPS, ONE 7-1/2 HP FILTER FEED PUMP, ALL GAUGES
AND VALVES, CONTROL PANEL
-MODEL SCF4-800 VACUUM FILTER COMPLETE WITH
5 HP VACUUM PRODUCER, 3/4 HP CONVEYOR DRIVE
MECHANISM, AIR FLOW LEVEL CONTROL ASSY, CARRIER
BELT AND PIPING.
-MOTOR DRIVES: SIEMENS
**PRICE QUOTED IS AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION AND SHOULD BE VERIFIED
BY PURCHASER**
This machine is listed for sale by Machinery International Corp
located in Woodbridge, Connecticut