25" X 42" WATERBURY FARREL 2 HI NON REVERSING MILL (13129) |
|
Stock Code: |
13129 |
Price: | $RFQ |
Subcategory: | 2 - Hi Rolling Mills |
Manufacturer: |
Waterbury Farrel |
Condition: | Used |
MACHINE # 13129
MANUFACTURER: WATERBURY FARREL
SPECIFICATIONS
MILL SECTION: 2 HI
MILL TYPE: NON REVERSING
MATERIAL: STAINLESS STEEL, CARBON STEEL
STRIP WIDTH DATA
MAXIMUM: 37IN/939.802MM
MINIMUM: 14IN/355.601MM
ENTRY GAUGE MAXIMUM: 0.125IN/3.175MM
EXIT GAUGE MINIMUM: 0.008IN/0.203MM
MAXIMUM COIL SIZE (WINDER) O.D.: 48IN/1219.202MM
COIL SIZE (WINDER) I.D.: 20IN/508.001MM
MAXIMUM COIL WEIGHT:
ABSOLUTE COIL WEIGHT: 14,200LBS/6441.077747KG
MILL DATA/
MILL SPEED (MAX): 500FPM/152.40MPM
MILL SPEED (MIN): 250FPM/76.20MPM
MILL POWER, MAIN MOTOR: 250HP/186.424968KW
650/1300 RPM, WATER COOLED, EDDY CURRENT CLUTCH
44O VOLT, 3PH, 60 CYC
PINION STAND RATIO16.8 : 12 SPEED
MILL ROLLS
WORK ROLL NOMINAL DIAMETER: 25IN/635.00127MM
BACK UP ROLL DIAMETER42IN/1066.802134MM
MILL BEARINGS , ROLLER TYPE/
WINDERS
WINDER POWER: 150HP/111.8549808KW
WATER COOLED, EDDY CURRENT CLUTCH
440 VOLT, 3 PH, 60 CYC
WINDER MANDREL:
DIAMETER: 20IN/508.001016MM
FACE: 42IN/1066.802134MM
MANDREL TYPE: EXPANDABLE, 19.687" CLOSED
WINDER TENSION:
MAXIMUM: 15,000LBS/6803.955366KG
INTERMEDIATE TO 650 FPM: LBS/0KG
MINIMUM: 9,900LBS/4490.610542KG
GEAR REDUCER RATIO15.22 : 1
PAYOFF
POWER: 3HP, AC/2.237099616KW
TENSION: 8,332LBS/3779.370407KG
SPEED: 500FPM
MANDREL DIAMETER: 17.5IN/444.5MM
NOMINAL: 21.521.5IN/546.1MM
(WITH FILLERS): 25.0IN/635.0MM
WATER COOLED BRAKE, MANUAL EDGE CONTROL
COOLANT -FILTER SYSTEM:
MILL DIRECTION: RIGHT TO LEFT
LINE CONFIGURATION
COIL CAR: FIXED, HYDRAULIC LIFT
PAYOFF REEL: PAPER WINDER
ENTRY BRIDGE TABLE: HYDRAULIC OPERATION
SENSING HEADS
DEFLECTOR ROLL:
MAIN MILL FRAME: (2) 20" DIA HYDRAULIC CYLINDER LOAD/ADJUSTMENT
ROLL POLISHING TOP AND BOTTOM
ROLL CHANGE SLED
DEFLECTOR ROLLPIVOTING FOR LOAD CELL
WINDER (LEFT):
COIL CAR: HYDRAULIC LIFT
PAPER WINDER
MOTOR DRIVE CONTROLS:
OPERATOR CONTROL CONSOLE
OVERALL FLOOR DIMENSIONS, (L-R / F-B): 26 FT X 33 FT
MILL IS DISMANTLED AND LYING IN STORAGE
**TEMPORARY SPECIFICATIONS SUBJECT TO REVISIONS**
**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**
**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**
This machine is listed for sale by Machinery International Corp
located in Woodbridge, Connecticut