52" TIMESAVERS "PUMA SERIES" "HIGH-PRODUCTIVITY" BELT GRINDER
MODEL: 52MWT-DDDD-75, S/N: 33203
ORIGINAL ACQUISITION COST OVER $230,000 **
52" 4-Head abrasive belt/belt deburring and finishing system
with 51" maximum width capacity, 10" minimum part length,
and 0" to 6" part thickness capacity. Power raising and
lowering of the conveyor bed, with programmable thickness
setting with digital readout (stores up to ten thicknesses).
First Sanding Station: 8" diameter rubber covered contact
sanding roll. Driven by 30 HP motor with percentage of
motor load indicator display in the main panel. Abrasive belt
52" x 75". Pneumatic abrasive belt tensioning, Electronic
abrasive belt tracking. A cam adjusted contact sanding roll
is provided to allow for fine abrasive belts or ScotchBrite
sanding belts, without the need to adjust the material hold-
down rolls.
Second Sanding Station: 8" Diameter rubber covered contact
sanding roll. Driven by 30 HP motor with percentage of motor
load indicator display in the main panel. Abrasive belt 52"
x 75". Pneumatic abrasive belt tensioning, Electronic
abrasive belt tracking. A cam adjusted sanding roll is
provided to allow for fine abrasive belts or ScotchBrite
sanding belts, without the need to adjust the material hold-
down rolls.
Third Sanding Station: 8" Diameter rubber covered contact
sanding roll. Driven by 30 HP motor with percentage of
motor load indicator display in the main panel.
Abrasive belt 52" x 75". Pneumatic abrasive belt
tensioning, Electronicabrasive belt tracking.
A cam adjusted contact sanding roll is provided to
allow for fine abrasive belts or ScotchBrite sanding belts,
without the need to adjust the material holddown rolls.
Fourth Sanding Station: 8" Diameter rubber covered contact
sanding roll. Driven by 30 HP motor with percentage of
motor load indicator display in the main panel. Abrasive
belt 52" x 75". Pneumatic abrasive belt tensioning, Electronic
abrasive belt tracking. A cam adjusted contact sanding
roll is provided to allow for fine abrasive belts or
ScotchBrite sanding belts, without the need to adjust the
material holddown rolls.
Conveyor Feed: Variable speed conveyor drive, 15 to 45 FPM.
27" Infeed conveyor loading area with sheet metal emergency
stop extends across the front of the sander for operator
safety
Paper Media Filtration: Closed loop coolant system with
paper media filter mounted underneath the Sander for a
more compact foot print
Air Knife Dryer: Air knife dryer mounted on the outfeed
of the Sander, equipped with (2) Air Knives, (3) sets of
squeegee rolls, and an auto lubrication system.
- The 41 Series (PUMA) is a complete machine with an integrated
- filtration system to keep metal parts cool during machining,
- and adding lubricity ensuring the abrasive belt’s service
- life is extended. A high-pressure air system dries th
- e metal parts as they are exiting the machine.
- Removal of burrs on laser, water-jet, punched,
- and cut metal parts.
- Provide the finest finish in the industry
- Deburr, edge break, & finishing of metal in one pass
- Mixing of metals, including titanium, aluminum,
- carbon & stainless steel, copper, etc.
** Eceptional Condition & Appearance - New 2016 **
** Located in Arkansas **
FOR MORE INFORMATION: Call Andy at 973-497-7600