CALL 386-304-3720 FOR AVAILABILITY

FEATURES:
Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.
ISO 9001 certified
1-Year Parts Only Warranty
Large spindle bore 3-1/8”
Spindle D1-8
Guideway width 12”
Main motor 10HP
16 spindle speeds from 25-1,800 rpm, 12 speeds
4-way rapid traverse on the carriage longitudinal and cross
60 kinds of inch threads, and 41 kinds of metric threads
Threading and feeding rate change without changing gears
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box

DISCLAIMER: Please note this machine is incompatible with the use of a rotary phase converter. Any attempt to purchase, install, or employ one, whether carried out by you or a professional service company, will automatically void the warranty. It is crucial to understand that any such actions are entirely the responsibility of the buyer.
This disclaimer is intended to clearly convey that the utilization of a rotary phase converter to power or operate this machine is not supported.

STANDARD EQUIPMENT:
Free Taper turning attachment, , installed
Free SINO DRO, installed
Automatic kick-out longitudinal carriage stop system
10” 3-jaw chuck with top reversible jaws, direct mount
12” 4-jaw chuck, direct mount
14” Face plate
1/2”-6” steady rest with roller jaws
7/8”-4-3/8” follow rest
Removable gap
4-way tools post
Foot brake
Halogen Work light and coolant system
Full length splash guard
Dead centers
Thread chasing dial
Tool box and leveling pads

SPECIFICATIONS:
Max. swing over bed: 20"
Max. length of workpiece: 80"
Max. swing over cross slide: 12-1/2"
Max. Swing in gap: 29-1/8"
Width of Bed: 12"
Effective length in gap to spindle: 6"
Effective length in gap to chuck jaws: 3-1/2"
Spindle bore: 3-1/8” , D1-8
Taper of spindle center: M.T.# 7
Spindle speeds: 25-1,800 rpm / 12 steps
Longitudinal feeds: 0.0011-0.063 IPR, 42 kinds
Cross feeds: 0.0003-0.018 IPR, 42 kinds
Inch threads: 2-112 TPI, 60 kinds
Metric threads: 0.1-14 mm , 41 kinds
Module threads: 0.1-7mm, 34 kinds
Diametral pitch threads: 4-112DP , 50 kinds
Max. travel of top slide: 5"
Max. travel of cross slide: 11-1/4"
Spindle length w/o chuck: 17-1/2"
Leadscrew length X TPI: 1-1/4” x 4 TPI
Diameter of tailstock quill: 2-3/8"
Max. travel of tailstock quill: 5-1/8"
Taper of tailstock quill center: MT4

Main motor: 10 HP, 3 Ph.
Prewired: 220VAC / 35A
Optional: 440VAC / 20A

Coolant pump motor: 1/8 HP 3 Ph.
Prewired: 220VAC
Optional: 440VAC

Overall dimensions, LxWxH: 128” x 43” x 59”
Net Weight, approx.: 6,350 lbs.

OPTIONAL ITEMS:
5-C Hand Lever Type Collet Closer, free install
3900-0014: 33 Piece 5C Collet Set, from 1/16 to 1-1/16” by 32ndth
3900-5260-300: ALORIS Type QC Tool Post Set , 6 pieces
3900-5004: Live Center for tailstock
3900-5005: Live Center for headstock
¾ to 10-1/2” large steady rest with roller jaws

OPTIONAL MODELS:
GML-2060

Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida