Weight

12000 pounds

Pressing Force Upper Ram (max – adj)

61 Tons

Die Eject (withdrawal) Force in % of Press Force

65%

Die Support Force (adj.) in % of Press Support

124%

Minimum Pressing Force

6 Tons

Powder Fill Depth (max -fully adj.)

5 in.

Stoke of Upper Ram (max – 2” adj.)

9 in.

Upper Die Area

11.25 “ x 17.25”

Maximum Opening (upper plate to die)

48.12”

Maximum Upper Ram Speed in./sec.:

Down (uploading): 17.4 Down (pressing – adj.): 0.9 Up (clear): 9.2

Maximum Die Ram Speed in./sec.:

Down (unloading – adj.): 11.65 Down (max ejection force – adj.): 1.4 Up (filling – adj.): 6.1

Pump Motor @ 1800 RPM

27.5 HP

Maximum Cycles/Min.

Minimum Ram Stroke (Min Tons: 84, Mid Tons: 56, Max Tons 42) 5” Fill Depth (Min Tons: 16, Mid Tons: 15, Max Tons 14)


EQUIPPED WITH: Withdrawal Action for Both Pressing and Ejection with Selectors for Ejection Only, Fraction or Forced Float. Independent Run Speeds for Approach, Press and Retract. 3-Speed Die with Adjustable Press. Eject and Fill. Upper Ram Pressure and Temperature Controls. 4 Post Design with Removable Die Set-Up. Adjustable Tonnage and Die Resistance. Upper Arm Weight Control for Top Punch Hold-Down. Feed Shoe Jog. Adjustable Cycle Start Delay. Pre-Press Dwell. Press Dwell. Eject Delay.This machine is being offered thoroughly checked out in our shop, cleaned, and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power here in our plant.

This machine is listed for sale by Adams Machinery Company located in Lake Bluff, Illinois