NEW ACER ATL 1440E FLAT BED CNC TEACH LATHE
Features:
- 1-9/16" (40mm) Spindle Bore with D-1 Camlock Spindle Nose
- 5HP Spindle Motor (continuous)/7.5HP (30min) for 3Phase 60 HZ Wiring
- Hardened and Ground Meehanite Casting Bedway, Ground Gears, and Spindle
- 3 Speed Range: 60 ~ 2,700 RPM
- "FAGOR" 8055 i/A-TC CNC Control
- Constant Surface Speed
- Manual - Teach - CNC Modes
- Dual MPG Handwheel
- C3 Ball Screw on X-Axis, C5 Ball Screw on Z-Axis & Laser Calibration on all Axes
Control Capabilities:
- Use as a D.R.O. in Manual Mode
- Electric Handwheel for Semi-Auto Mode
- Program in Teach Mode
- Program w/Canned Cycles
- Powerful CNC Full Auto Mode
- No Programming Experience Required
- Conversational or G-Code Programming
- Minimum Set-Up Time
Specifications:
Height of centers: 7"
Swing over bed: 14"
Swing over cross slide: 8-3/4"
Swing over saddle wings: 14.17"
Distance between centers: 39.37"
Spindle Nose: D1-4
Spindle taper: MT#5
Spindle Dia. At Front Bearing: 2.77"
Spindle through hole: 1-9/16"
Taper in reduction sleeve: MT#3
Number of spindle bearing: 2
Number of speed range: 2
Spindle speed range RPM: 60~650/300~2700
Cross slide travel: 7.87"
Compound rest travel: 3.94"
Tool section Max.: 3/4" x 3/4"
Bed length: 54"
Width of bed: 9"
Height of bed: 10.63"
Slideway surface hardness: HRC 48
Quill outer diameter: 1-9/16"
Quill travel: 4"
Taper center: MT#3
Maximum rapid feed Z (IPM): 400 IPM
Maximum rapid feed X (IPM): 400 IPM
Spindle motor brake: w/Servo Motor
Headstock lubrication: Splash Lube
Coolant tank capacity: 5.78 gal.
Coolant pump motor: 1/8 HP
Spindle motor: 5 HP (cont) / 7.5 HP (30 min)
Power requirements, machine: 230V/11 HP/ 38A
Floor dimensions: 77.96"x46.46"x74.81"
Packing dimensions: 82.68"49.22"x86.62"
Weight net: 2200 lbs.
Weight gross: 2420 lbs.
Standard Accessories:
- Halogen work light
- Tool box w/tools
- Fully enclosed splash guard
- Coolant system
- Automatic lubrication system
- Manual tailstock
Optional Accessories:
- 6" 3-jaw chuck (D1-4) w/direct mount
- 8" 3-jaw independent chuck (D1-4) w/direct mount
- 8" 4-jaw independent chuck (D1-4) w/backplate
- Steady Rest w/Rollers (0.78"~2.15")
- Follow Rest (0.78"~1.97")
- Face Plate (10")
- "Aloris" Tool Post & 4-Holder set (#2 - BS)
- "Aloris" Tool Post & 6-Holder set (#2 - Set)
- Four Way Tool Post
- H4 Electric Tool Post (C6140)
- 5C Collet Closer (lever-type)
- Upgrade to 440V / 3-Phase Inverter Drive
- Program Training
FOR MORE INFORMATION: Call Terry at 973-497-7612