ACRA MODEL 8VL HEAVY DUTY BED TYPE VERTICAL BORING & MILLING MACHINE |
|
Stock Code: |
15428 |
Price: | $RFQ |
Subcategory: | Bed Type Millers |
Manufacturer: |
Acra |
Model: |
8VL |
Condition: | New |
<p class="MsoNormal"><strong>ACRA MODEL 8VL HEAVY DUTY BED TYPE VERTICAL BORING & MILLING MACHINE</strong></p>
• Full Geared Drive Spindle with 2-ranges variable speed, powerful and easy operating<br />• Table Feeding System equipped with precision ball screws and powerful servo motor ensure the table movement smoothly.<br />• The X, Y, & Z Axis equipped with pneumatic clamp device.<br />• The X-Axis could be extended up to 2500 mm with 2 sub-slide way on request.<br />Table & Saddle:<br />• The Table and Saddle are made of high-quality cast iron which has been carefully stress relieved.<br />• Way surfaces are hand scraped and finished<br />Feed Box:<br />• Table and Saddle feed can be driven by power or manual operation, and is easy to change speeds and to operate.<br />• Because of the large range of speeds, it is simple to go from low speed heavy cutting to high speed<br />finishing cutting.<br />Backlash Eliminator:<br />• Table feed system is equipped with easy adjustable backlash eliminator to increase operating stability and cutting efficiency.<br />• Large supporting surface and narrow square guide ways provide stable and smooth sliding.<br />Accuracy of Table & Saddle:<br />• Table and saddle are made of high quality cast iron, treated through stress relieving.<br />• The sliding surfaces are scrapped and finished.<br />• The upper, rear and front reference surfaces are ground, T-slots are correctly machined. So that the flatness, parallelism and squareness all meet the requirements of operation and are convenient in setup the work pieces.<br /><br />Specifications:<br />Table Travel X (Longitudinal): 78.74”<br />Table Travel Y (Cross): 31.5”<br />Vertical Spindle Head Travel (Vertical): 27.56”<br />Vertical Spindle Nose to Tabletop: 2.75” ~ 30.3”<br />Vertical Spindle Center to Column Front: 31.5”<br />Table Working Area: 29.5” x 106.3”<br />T slot (Wide x No. x Pitch): 0.7” x 5 x 5.9”<br />Tabletop to Floor: 35.43”<br />Spindle Nose: ISO R297 No.50<br />Vertical Spindle Speeds: 45-1,500 Infinitely Variable<br />Z-Axis Feeds (Vertical Spindle): 0.12 ~ 11.81”/min<br />Rapid Traverse (Longitudinal & Cross): 122”/min<br />Feed Rates (Longitudinal & Cross): 1.1” ~ 39.37”/min<br />Change of Feeds: Infinitely Variable<br />Motors:<br /> Vertical Spindle: AC 20 HP<br /> Feed: Servo Motors, X & Y-Axis: 4.7 HP, Z-Axis: 1.75 HP<br /> Lubrication: AC 3.5W-2P<br /> Cutting fluid: AC 1/6 HP-2P<br />Voltage: 220V AC~3 PH<br />Weight 26,000 lbs
<div>Dimensions 225 × 121 × 115 in</div>
<br />Standard Equipment:<br />• Coolant System.<br />• Auto Lubrication System.<br />• Draw Bar.<br />• Leveling Blocks.<br />• Automatic Table Feeds with Rapid Traverse.<br />• Tools and Toolbox.<br />• Hardened & Ground Box ways.<br /><br />
<div> </div>
This machine is listed for sale by Blumberg Machinery
located in Bannockburn, Illinois