NEW SUMMIT 26-6 x 200 BIG HOLE ENGINE LATHE
SPECIFICATIONS
Capacities
Swing over bed: 26"
Swing over cross slide: 18"
Swing over gap: 35"
Length of gap: 18"
Work Piece Weights
At the headstock: 1760 lbs.
Between Centers: 11,000 lbs.
Between Centers, One Steady Rest: 14,300 lbs.
Between Centers, Two Steady Rests: 17,600 lbs.
Headstock
Spindle speeds (no) range RPM: (12) 13-800
Hole through spindle: 6-1/8"
Spindle nose: D1-11 Camlock
Quick Change Gearbox
Threads per inch (no.) range: (36) 2-28 TPI
Metric threads (no.) range: (65) .08-14mm
Module threads (no.) range (22) .5-7M
Diametral Pitch (no.) range: (36) 4-56P
Longitudinal feeds (no.) range: (36) .00196-.0276
Cross feeds (no.) range: (36) .0009-.0137
Leadscrew (Dia) range: (1-3/4") 2 TPI
Carriage & Apron
Cross slide travel: 14"
Compound rest travel: 9"
Tailstock
Travel of spindle barrel: 9"
Diameter of spindle barrel: 3-3/4"
Taper of center: #5MT
Two speed: 1:1, 4:1
Bed
Width of bed: 18"
Hardness of bed (Rockwell C): 42-50
Taper Attachment
Degrees of taper: +/-10 degrees
Maximum turning length per setting: 20"
Motors
Main Drive: 20HP
Coolant pump: 1/8HP
Steady and Follow Rest
Standard Steady Rest: 2" -14.9"
Follow rest: 1.2" - 5.9"
Shipping Data
Overall width: 54"
Overall height: 64"
Overall length: 284"
Weight: 12,210 lbs.
Electrics
220/440/3/60
Standard Features
- Big 6-1/8" thru hole
- Inch/metric threads w/single switch lever
- Cuts most inch/metric threads without change gears
- Hardened & ground bedways
- Forced lubrication to the headstock, carriage, & bedways
- Removable gap
- Precision (3) bearing spindle
- Crossfeed and threading safety interlock
- 4-way rapid traverse
- Two speed tailstock
Included Accessories
- Standard steady rest (2"-14.9")
- Follow rest
- Thread dial
- Coolant system
- Taper attachment
- 3-Jaw chuck (15-3/4" w/6.1" Bore)
- 20" 4-Jaw chuck
- Carriage stop
- Work light
- Full length splash guard
- Service wrenches & spanners
Options
- Extra capacity steady rest 11.8" - 20.8"
- 20" Steel body precision 3-Jaw chuck w/7.5" bore and 2 piece jaws
- Aloris quick change tool post w/holders (2#1, 2#2)
- Adapter plate to mount rear chuck (D1-11)
- Fagor 2-Axis Digital Readout
- Installation Assistance
FOR MORE INFORMATION: Call Terry at 973-497-7612