CALL FOR AVAILABILITY

FEATURES:
ISO 9002 certified: Quality up to world industry standards
Meehanite casting: Highest grade of casting possible.
A pair of high out-put fans: Keeps head and 3-hp motor cool, to run jobs for extended periods without damaging the motor, belts and bearing
A pair of precision ABEC-7 angular contact bearings to support spindle. The quill is ground and chromed to fit the housing: This insures a spindle runout of 0.0002” T.I.R.
Motor shaft and VariDrive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: For smooth speed changes.
Motor shaft has an oil channel in the center that is fed by grease fitting on the lower end: To keep VariDrive pulley moving smoothly on the shaft
This LMV mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment. It also prevents the shaft from being distorted by the tension of the belt: For quiet, accurate operation at any speed for years and years.
One shot lubrication system: For lubrication of ways and lead screws. (X, Y and Z-axis)
Hand scraped saddle and knee: For better oil retention. It avoids having chips and dirt embed in the knee and damage the sliding surface
Oil groove are milled: For maximum lubrication on all wear areas
Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts all times to keep backlash at .0008” within 20”.
Table and saddle are mounted with thrust bearings that are preloaded: Eliminating endplay for precisely controlled lateral movement.
Patented knuckle design uses 6 bolts 3 per side, securing them from the outside:This method locks the head securely resulting in better accuracy and performance.
Ways are hard chrome dovetail on saddle and column
3HP Motor
Variable Speed Drive (60-4500 RPM)
R-8 Spindle
Dual Cooling Fans
Meehanite Casting
Chromed Ways
Self-Lubricating Motor Shaft Extends Pulley Life
Abec-7 Super Precision Spindle Bearings
NOTE: DIGITAL VARIABLE SPEED (DVS HEAD) OPTION AVAILABLE!

STANDARD EQUIPMENT:
One Shot Lube System
Hard-Chromed Ways
Front and Rear Rubber Way Covers
Tool Kit Includes:
Machine Manual Half Nut Wrench 17m & 19m, set of 6 Allen Wrenches, Philip Screw Driver, Flat Head Screw Driver, Oil Can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, & Can of Paint.
Wired 220V or 440V. Please Specify

SPECIFICATIONS:
TABLE
Working surface: 9" x 42"
T-slot number, size: 3 Slots, 5/8”

CAPACITY
Travels (X, Y, And Z): 30” x 12” x 5”
Ram Travel: 12"
Knee travel: 16"
Spindle to column (min-max): 6 3/4”-18 1/2”
Spindle to nose to table (min-max): 2 1/8”-18”

SPINDLE
Spindle Motor: 3 HP
Spindle Nose Taper: R8
Spindle Variable Speed Drive: 60-4500 Rpm
Quill Feed 3 Speed (IPR): 0.0015, .003, .006”
Quill diameter: 3-3/8"
Head swivel: 360°
Head Tilt (Lt. To Rt): 45°
Head tilt (up-and-down): 45°

DIMENSIONS & WEIGHT
Floor area (w x d x h): 7’ x 6.5 ’x 6.75’
Net weight: 2,400 lbs.

TOTAL POWER CONSUMPTIONS
220V: 3KVA/8 amps
440V: 3KVA/4 amps

OPTIONAL ITEMS:
6” “Kurt” Vise with Swivel Base D688
Auto lube pump
Right Angle Milling Attachment with Arbor
Right Angle Milling Attachment with Arbor
“Sharp” Power Table Feed with Safety Handle (X-Axis)
(*NOTES: SP-250A installation may reduce the X-axis travel.)
X Axis Installation
“Sharp” Power Cross Feed with Safety Handle (Y-Axis)
Y Axis Installation
“Sharp” Power Knee Feed with Safety Handle (Z-Axis)
Z Axis Installation
Drill Chuck & Drill Arbor
6” Riser Block
Riser Block Installation
Coolant System with Chip Pan at Base (pump included)
“Maxi Torque Rite” Power Draw Bar
“Maxi Torque Rite” Power Draw Bar - Factory Installation
R-8 Collet (Set of 11) - 1/8”-3/4” BY 1/16”
Clamping Kit (52 pcs/Steel Rack)
Halogen Work light
CE mark
380V and 575 V transformer
UL components upgrade with electrical box ( factory order)
UL compliance certificate under State of California
Fagor Digital Readout 2-Axis X&Y (Fagor 20i)
2 Axis D.R.O. Installation
Fagor Digital Readout 3-Axis X&Y on Quill (Z) (Fagor 30i)
Fagor Digital Readout 3-Axis X&Y on Knee (Z) (Fagor 30i)
3 Axis D.R.O. Installation
CALL FOR MORE INFORMATION

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida