"NEW" ACER DYNAMIC "26L" SERIES LARGE BORE ENGINE LATHE
MODEL: DYNAMIC 26120L
Features:
4-1/2" Spindle bore
D1-8 Spindle Nose
15 HP speed Motor for 220V/440V /3 Phase / 60HZ Wiring
Spindle Speed: 10 ~ 1,000 /RPM (12 step)
Auto. Feed & threadig are interlocked to prevent simultaneous functions
Thermal threated Meehanite Casting Bed; Bed Hardness reaches HS70
Heat Treated and Precision Ground Alloy Gears
Universal Gearbox for both Inch/Metric Thread & Conversion Chart
Automatic Longitudinal Multiple Feed Stop
Bed Width: 15.7"
SPECIFICATIONS:
Swing Over Bed: 26"
Swing Over Gap: 35"
Swing Over Cross Slide: 17.3"
Distance Between Centers: 118.1"
Width of Bed: 15.7"
Spindle Nose: D1-8 / D1-11 (Opt)
Spindle Bore Diameter: 3.3" / 4.5" (Opt)
Spindle Speeds: 15 ~ 1500 RPM (12 steps)
Taper of spindle bore: MT 7
Inch threads range: 2 ~ 56 TPI
Metric threads range: P 0.5 ~ P 14
Long. feeds range: 0.002" ~ 0.03"
Cross feeds range: 0.0008 ~ 0.02"
Leadscrew diameter: 1.5"
Leadscrew pitch: 4 T.P.I. Or 0.2"
Taper of tail center: MT 5
Compound rest travel: 7.9"
Cross slide travel: 14.8"
Tail spindle travel: 6.5"
Tail spindle diameter: 3.3"
Main drive motor: 15 HP
Coolant pump: 1/8 HP
Packing Dimensions: 190.9" x 45.3" x 76.3"
Net Weight: 8157 lbs.
Gross Weight: 8488 lbs.
Standard Accessories:
12" D1-11 three jaw chuck
Steady Rest: Bronze Tip (3.14" - 10.62")
Longitudinal Carriage stop
Halogen work light
Built-in Coolant system
Follawable Splash Guard
4-Way tool post
Tool box with tools
Optional Accessories:
18" 4-jaw independent chuck (D1-11)
Follow rest: Bronze Tip (0.78" - 3.93")
20" face plate (D1-11)
ALORIS Tool Post & 4 holder set (#5-BS)
ALORIS Tool Post & 6 holder set (#5 set)
DORIAN Tool Post & 4 holder set (SD50DA-TS)
Five position carriage stop
Micrometer stop
5C Collet Closer (lever type)
5C Collet Set (1/16" to 1-1/16" x 16ths; 17pcs/set
Taper turning attachment
MAGNESCALE 2-Axis D.R.O.
NEWALL 2-Axis D.R.O.
FOR MORE INFORMATION: Call Terry at 973-497-7612