NEW SHARP MODEL: 2240B
PRECISION GAP BED ENGINE LATHE
FEATURES:
- D1-11 Camlock
- 4.5” Spindle Bore
- Direct Selection For Inch/Metric Threads
- One Piece Cast Meehanite Bed
- Quick Change Gearbox
- 15 HP Motor
- 12-Speed Gear Head (10-1,000 RPM)
SPECIFICATIONS
CAPACITY:
Swing Over Bed: 22"
Swing Over Cross Slide: 13.2"
Center Height: 11"
Swing Over Gap: 31"
Distance Between Centers: 40"
HEADSTOCK:
Spindle Nose Type: D1-11 Camlock
Spindle Bore: 4.5"
Spindle Speeds (12): 10-1,000 rpm
Taper of Spindle Bore: MT#7
Taper of Center: MT#5
THREADS AND FEEDS:
Longitundinal Feeds - in/rev (18): 0.0022-0.032"
Cross Feeds - in/rev (#): 0.00026 -0.035" (17)
Inch Threads (#): 2-56 tpi (44)
Metric and Module Threads (#): 0.5-14mm (24)
D.P. Threads (36): 4-56 mm
Leadscrew Pitch, Diameter: 4 tpi, 1-1/2"
CARRIAGE:
Cross Slide Travel: 14.75"
Compound Rest Travel: 8"
Compound Width: 6"
BED:
Bed Width: 15-3/4"
TAILSTOCK:
Quill Travel (graduated): 6-1/2"
Quill Diameter: 3"
Quill Taper: MT#5
GENERAL:
Spindle Motor (220V or 440V, 60,3)
Net Weight (approx.): 5280 lbs
Dimensions: (L x W x H): 85" x 41" x50"
Standard Color: Gray
ELECTRICAL:
Voltage: 220 & 440
Phase: 3 phase
Total Power Consumptions
230V.….….….….. 16KVA/45 amps
460v.….….….….. 16VA/22.5 amps
STANDARD EQUIPMENT:
- 4-Jaw 16” Chuck.
- Coolant System
- 4 Way Tool Post
- Halogen Work Light
- Face Plate 20”
- Steady Rest 12” (3.2”-10.6”)
- 4-Way Carriage Stop
- Splash Guard
- 16” Chuck Guard
- Tailstock
- Follow Rest ( 0.79” – 3.94”)
- Wired 220V or 440V. Please Specify
- Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m,
Set of 6 Allen wrenches, Phillip Screw Driver,
Flat Head Screw Driver, Oil can, Grease Gun,
Rear Way Cover Bracket, 2 sets of dear center,
Pin for Indicator, and Can of Paint
OPTIONAL ACCESSORIES:
- 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore
- 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore
- 4 - Jaw Chuck 16” D1-11 (Bison)
- 3 - Jaw Chuck 15” D1-11 (BTC)
- 4 - Jaw Chuck 16” D1-11 (BTC)
- Taper Attachment (Factory order)
- Drill & Arbor (JACOBS)
- Quick Change Tool Holder (Aloris) 7 pcs.
- Live Center – Royal (Dual Bearing)
- Live Center – MT#5
- 5C Lever Collet Closer
- 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs.
- Micrometer Carriage Stop
- Steady Rest 12” ( 3.2”- 10.6”)
- Steady Rest 15” ( 6.7” – 15.2”)
- Roller Jaws Set (3 pcs)
- Chuck Guard with limited switch ( factory order only)
- Tool guard with limited switch ( factory order only)
- Lead screw guard ( factory order only)
- Guard behind spindle( factory order only)
FOR MORE INFORMATION: Call Terry at 973-497-7612