NEW VICTOR 29" x 60" PRECISION HIGH SPEED LATHE
MODEL: 2960T *MADE IN TAIWAN*
Tough built to last with large 4-1/8" spindle bore, 4-way rapid traverse, and 20 HP main motor.
The best in its class to handle utmost demanding work.
FEATURES:
High precision hardened and ground spindle
Hardened and precision ground induction bedways with high tension mechanize casting iron
Spindle is supported by 3 bearings (2 taper roller bearings and one ball bearing)
4-1/8" large spindle bore with D1-11 camlock spindle nose
Rapid and positive magnetic disc brake system is operated by emergency switch control or foot brake
All running parts are lubricated by a pressure pump in gearbox
Sliding, surfacing, and screw-cutting motions are fully interlocked in apron
A cone-clutch device in the apron to prevent overload
Dual speed tailstock quill (ratio 1:1 and 1:4) provides easy drilling operation
4-way power rapid traverse
Ampere meter for power consumption monitoring
Jog button for easy spindle speed changes
20 HP main motor
SPECIFICATIONS:
Swing over bed: 29-1/8"
Swing over cross slide: 20-1/2"
Swing over gap: 37-25/32"
Bed width: 16-1/2"
Distance between centers: 53"
Spindle bore diameter: 4-1/8"
Spindle bore taper: 108 x 1 : 20
Taper of center in sleeve: M.T. #5
Spindle nose: D1-11
Number of spindle speeds: 12 steps
Range of spindle speeds (rpm): 25 ~ 1,200 rpm
Speed selections: 25, 38, 53, 75, 108, 149, 214, 308, 424, 603,
860, 1200
Range of longitudinal feeds: 0.0012" ~ 0.0287" / rev
Range of cross feeds: 0.0004" ~ 0.0118" / rev
Inch threads: 2 ~ 56 TPI x 45 kinds
Metric threads: 0.5~14 mm x 31 kinds
Cross slide travel: 16-1/4"
Compound slide travel: 9"
Tailstock taper center: M.T. #5
Tailstock quill travel: 7"
Main motor: 20 HP 3 PH
Coolant pump: 1/8 HP
Shipping dimensions: 120" x 54" x 75"
Gross weight: 8,730 lbs.
STANDARD ACCESSORIES:
4-way power rapid traverse
Removable gap
Tailstock with duo speed quill
Coolant system
Chuck cover with limit switch
D.P. / module thread change gears
Threading dial indicator
Dead center M.T. #5
Leveling screws and pads
Manual and parts list
SPECIAL PACKAGE INCLUDES:
Steady rest with rollers
Follow rest
4-way tool post
Face plate
Micro bed stop
Halogen work light
Chuck cover with limit switch
OPTIONS (Call for pricing):
15” 3-jaw chuck (D1-11)
15” zero-set 3-jaw chuck with D1-11 back plateface=Arial size=3>
15” zero-set 6-jaw chuck with D1-11 back plateface=Arial size=3>
20” 3-jaw chuck (D1-11)
20” 4-jaw chuck (D1-11)
25” 4-jaw chuck (D1-11)
Steady rest w/ rollers 11” (1.5” ~ 10.5” capacity)face=Arial size=3>
Steady rest w/ rollers 13” (8.5” ~ 13” capacity)face=Arial size=3>
Steady rest w/ rollers 19” (10” ~ 19” capacity)face=Arial size=3>
Steady rest w/ rollers 23” (16” ~ 23” capacity)face=Arial size=3>
Follow rest
Extension quills w/ rollers for 15” steady rest (3” ~ 8” capacity) face=Arial size=3>
Ext. quills w/ rollers for 19” steady rest (3”~10” capacity) face=Arial size=3>
Face plate 23-5/8” (600mm) size=3>
Driving plate 15-3/4” (400mm) size=3>
Micro bed stop
6-position bed stop
Live center M.T. #5
On-carriage splash guard size=3>
Taper turning attachment
Halogen work light
Full length splash guard for 2960Tface=Arial size=3>
Quick change tool set 1¼” (one toolpost & 5 holders, #1,2,4,7,10)
FOR MORE INFORMATION: Call Terry at 973-497-7612