Main supplier: SEH, ACME-Murrayway
Commissioning/year: 1971
Total length: 46m

Strip width min./max.: 550-1-560 mm
Strip thickness min./max: .0.3-8 mm
Roll inner diameter: 610 mm
Roll Outer diameter max.: 1850 mm
Coil weight max.: 26 t
Speed min.: 10 m / min
Speed max.: 40 m / min
Tension draw max.: 400 kN = 40 t

Welding machine: Messer Griesheim
Wire diameter: 1.6 mm
Procedure: MAG
Protective gas: Argon S 3

Grinding cabins: ACME Murrayway
Number: 4
Side: Top cut
Grinding speed:
- I and II: 10-15 m/sec
- III and IV: 15-22.5 m/sec
Angle: from 20 to 7 positive negative
Coolant: Mineral oil (from KWW scaffolding)
Turn speed: 1000 l/min per cabin

Circulation and cleaning plant: Rolling construction-Assembly-GES.
Speed: 4000 l/min
Cleaning degree: 5 m
Principle: Vacuum belt filter (1 coarse and 1 fine filter)

Extraction: Sana KG
Principle: Tron electrostatic precipitators
Volume: 54,000 m3/ h for grinding cabins
12,000 m3/ h for oil filter
Grinding method: with cooling oil, either with positive or negative angle of

grinding
Abrasive consumption: approx. 185 units / month
Sanding belts: Silicon carbide and aluminum oxide
Grain size: 36 to 240, abrasive mat
Grinding oil consumption: approx. 6.5 l / t

Electronic equipment
Power supply from existing 5 kV grid, 2 Tampan 5/0.4 kV
2 direct current drives per 160 kW =320 kW
52 three-phase Motors 1.1 kW =800 kW
Overall performance: 1120 kW

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey