We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will change over time. Call us to confirm details of a particular machine as well as stock levels before deciding to purchase

Make: Sharp
Model #: SVL-4525SX-M
Condition: New

Features:
Rapid Traverse up to 1,417 per minute/ 36,000mm
Standard spindle speed of 15,000
Position accuracy of .00002" +/- 0.005mm
Repeatability of .0002" +/- 0.005mm
Arm Type: 30-tool ATC
Siemens 828D-PPU260 Control

Specifications:
Work Capacity:
Travel X,Y,Z: 45" x 25" x 20" (1,150mm x 635mm x 510mm
Spindle Nose to Table: 5.1 - 25.2" (130mm - 640mm)
Spindle Center to Column: 31.5" (800mm)
Work Table:
Table Area: 51.2" x 25" (1,300mm x 635mm)
Maximum Workpiece Weight: 1,760 lbs (800 kg)
Spindle:
Spindle Taper: CAT 40
Spindle Max. Speed: 15,000 rpm
Driving Type: Direct Drive
Bearing: Ceramic Bearing
Spindle Motor: 20/25 (15/18.5 kW)
Rapid Traverse X/Y Axis: 1,417 ipm (36,000 mm/min)
Rapid Traverse Z Axis: 1,417 ipm (36,000 mm/min)
Cutting Feed Rate: 0.04~1,417 (1~36,000)
Transmission: Direct Drive
Automatic Tool Changer (ATC):
Magazine Type: Side Arm 30T
Tool Selection Type: Random
Max. Tool Diameter: 2.95" (75mm)
W/O Adj. Tool, Max. Dia: 5.9" (150mm)
Max Tool Length: 11.8" (300mm)
Max Tool Weight: 15.4 lbs (7 Kg)
Accuracy:
Positioning Accuracy: 0.0002/0.005"
Repeatability Accuracy: 0.0002"/0.005"
Coolant System:
Flood Coolant Nozzles: 6
Coolant Tank Capacity: 52.8 Gal. (200 L)
Chip Conveyor: Aluminum

Machine Size:
Floor Space (w/ Chip Conveyor): 171.5" x 134.3" x 112"
Weight: 18,260 lbs. (8,300 Kg)
Power Requirement:
Electrical: 220V/440V / 3 Phase/ 20 KVA/60 Hz
Air: 6 CFM @ 88 psi

Standard Equipment:
Siemens 828D-PPU260
AICC I (40 block look-ahead)
4 Axes Simultaneously
512k Memory
USB Port
CF Card
Embedded Ethernet
RS-232C Interface
Network Drive Management
Rigid Tapping
Manual Guide Oi
CTS Prepare
Scrapper Type (for Aluminum) Chip Conveyor

Optional Accessories: (Please call for pricing and additional information)
AICC II (200 block look-ahead)
Nano Smoothing
Bell Type Acceleration/ Deceleration
2M Memory
2G Data Server with Ethernet
Network Drive Mangement
Manual Guide i

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.

MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

This machine is listed for sale by MachineStation located in Chino, California